USB ports on Pavilion dm4 - 2055ca

Similar Questions

• Pavilion dm4 - 2055ca upgrade

  Hi, I have an amount of insuffurable of idle on my specific computer when connecting to the internet. Web pages take forever to load and sometimes freezes and crashes. I am also connected via an ethernet cable. Computer of my sister under one roof a speed still better than I do (router and his computer is much older).

  I did a recent analysis antivirus, spyware check, clean my registry, my temp folder and internet browsing history. I want that they made no difference. Is there something else I'm missing?

  When upgrading, I wonder what RAM memory cards are compatible for this computer. I guess it's using two sticks of 2 GB now and would like to 4 GB each.

  Hello:

  According to the page of the plug for your laptop, there is a module memory 4 GB installed, so everything you need is another module of memory GB DDR3 PC3-10600 4 maximum PC up to 8 GB.

  http://support.HP.com/us-en/document/c02861772

  Paul

• USB ports not working do not. Pavilion dm4-3090se

  USB ports not working do not.

  Thanks for your reply.

  no ports were working, so I went into Device Manager, uninstalled them, re-started... and... iola!

  they were back!

  Thank you again for your answer...

  Louise

• HP pavilion g6 cannot enable usb ports

  Hai,

  my product is hp pavilion g6 2320tx and im using the windows operating system 7, the problem is that am not able 2 usb ports allow 3 (a single port woking normally but the other two are not detect devices usb..) pls guide me so that I can solve this problem

  Thanks in advance

  Hello:

  You must install the driver for the 3 usb controller.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359407 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

  Hi all

  Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

  Win 7 64 bit

  HP Pavilion Slimline desktop computer

  Help!

  Update: I did troubleshoot a HP check and update driver.  The screen messages

  USB root hub: this device does not work correctly.

  The current tab:

  Generic USB Hub (6)

  1 port available

  Power required: 0mA

  Solved.

  I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

  I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

• HP Pavilion 15-n259TX (two Usb ports on the left does not work)

  I recently lowered the windows note 8 for windows 7 and found that the two usb ports on the left side of my laptop no longer works, that is, they do not detect anything, be pendrives or external hard drive. Can you help me fixed the problem?
  My laptop is HP Pavilion n259TX 15.

  Hello

  Install the driver usb 3.0 on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64965.exe

  Kind regards

  DP - K

• Pavilion 17-g192dx: USB Ports not recognized

  Hello

  I have a HP Pavilion 17-g192dx that's installed with Windows 10 factory. I decided to give the new operating system a go, but was overall very satisfied with his overall performance and updates of buggy. Not wanting to give up the new machine, I decided to bring it back and oldie but a goodie - Windows 7. I got a copy of Windows 7 Home Premium lying around so I gave a go and installed the operating system. I got the internet running successfully and in no time most of my drivers have been installed. The problem that I face now is that the old BONES will not work with my USB ports. I do not use a hub and have almost exauhsted the drivers for this Web site section. If someone wants to kindly point out how I could go about fixing this issue, any help would be much appreciated.

  I'm not as interested to get back to Windows 10. It is too slow for daily use (ma) and buggy.

  Thanks in advance!

  Hello:

  Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-Intel-C220-C610-chipset-family?product=65855

• Desktop HP Pavilion HPE h8 - 1360t there rear USB ports?

  I have one of these order of HP computers. Everything I've read indicates there are USB ports on the front and the top of the unit. Nothing on the back. Not even a photo. Having the wires coming out of the front constantly ensure is ugly, in my opinion.

  Here are the specifications and configurable options for the desktop HP Pavilion HPE h8 - 1360t CTO. Here are the specs because that's card mother IPMMB-FM (Formosa). According to the specifications;

  

  (#2) - USB 2.0: 4

  (#4) - USB 3.0: 2

• HP pavilion 15-n001: all 3 USB ports not working not

  my new hp Pavilion 15-n001, suddenly all 3 USB ports do not work. Help me solve this problem

  Have you checked the status of the warranty that I asked?

  The resolution of the issue will be a replacement of the motherboard equipment.

  Contact HP support for warranty repair and provide the code to hardware failure.

  Let the technician customer you talk with know that you came here for help.

• Pavilion slimline s3760in: usb ports and the Internet connection

  Hello

  I use my hp pavilion slimline s3760in pc for about five years. Recently my hard drive failed and I had to replace.

  Everything was going well until my pc stopped recognizing all the same usb ports in BIOS mode on many occasions (he only recognized usb keyboard sometimes). Finally I have reset factory. The Usb ports now generally work fine, but now when I connect to the internet, none of my browsers can disply any page, even other programs cannot connect to the internet, although it shows that I am connected to the internet.

  Is it a hardware problem or just windows?

  Hello again @vr46,

  Thank you for the updated information. I'm you provide a HP support document: Broadband Internet Connection to a dispute (Windows Vista), which has the troubleshooting steps you need to solve the problem you are now facing. I suggest that you take the time to go on the document and apply the suggested steps.

  Please re-post if you need extra support. Thanks for posting on the HP Forums. Have a wonderful day!

• My usb ports on my HP Pavilion dv7-6b56nr Entertainment Notebook PC

  My usb ports on my HP Pavilion dv7-6b56nr Entertainment Notebook PC do not work.    Windows 7 Home Premium 64 bit.  Product # A1T84UA.  No matter what I do, I can't get to work.  When I go into the Device Manager it shows a conflict.  When I try to update the drivers, he says that they are up-to-date.  I even tried to do a full system recovery, and if it was not for an image that I saved my computer would become a paper weight.  I am grateful, that he's back running.

  Hello

  Please install driver chipset for your machine from this link (a 2nd), this will fix a few things for you:

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207

  Kind regards.

• HP Pavilion G6-2146sl: HP Pavilion G6-2146sl left USB ports not working not

  Hi, I have a HP Pavilion G6-2146sl with Windows 7 Ultimate x 64... my problem is that the two left USB ports stopped working properly: for example, when I insert a USB flash drive lights up but it is not recognized by Windows. Is the only port that works on the right side of the laptop. I tried to do a search of driver, but Windows cannot find driver. Here is a screen of my Windows device management:

  

  Thank you in advance for your help and sorry for my bad English, I'm Italian.

  Hello

  AMD AHCI, USB 3.0 chipset and RAID drivers

• Pavilion 15 n-246se: usb port 3 for hp Pavilion 15 n-246se

  I have hp pavilion 15 n-246se and I tried hard to set the usb port 3, but I can't... it worked before, but now it no longer works

  Thanks in advance

  Hi @sohaibadel,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-n246se and problems with USB 3.0 does not properly. First of all, you need to remove all USB devices.

  In Device Manager uninstall everything that is listed in the USB devices. Restart the computer after the uninstall, it must be reinstalled automatically. Then put in the USB devices and it should update all drivers.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  I would like to know how this happens.

  Thank you.

• Pavilion a6120n: USB ports and slots memory card does not

  My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

  I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

  Here's what I've tried so far.

  Run antivirus software. Full scan & scan memory - no problem

  Don't scan complete malewarebytes - no problem

  I tried to reboot several times without success.

  Catering to several previous = failure restore points

  Computer restart in repair = failure mode

  Use the repair disk I did = failure

  Control the management of the power supply for each usb port see if power was properly routed = ok

  Removed the cover of the housing and carefully inspected the cables and connectors.

  Finally I tried to uninstall the drivers usb = failure

  After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

  Still no usb or memory card function.

  Any help would be appreciated

  Thank you

  MrBob38

  OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

  I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

  After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

  I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

  I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

  Thanks for the comments, and I consider this problem to be solved.

  MrBob38

• Pavilion 6710f: upgrade to 3.0 in desktop pavilion 6710f usb ports?

  I have a hp pavilion p6710f desktop that has 4 usb 2.0 ports on the back, & 2 front. is it possible for me to install usb 3.0 ports in whole or in part? or just add them (which would be better)? Thank you!

  You can check your power cables. PIN 4 (molex), looked like this:

  

  What I see on the page product, you will need it IF you use the USB port for equipment that consumes energy high enough. That is to say; external hard drive, smartphones.

  If you are just using the port for a mouse or keyboard, you will not need this.