USB ports work very strange on my new Satellite L650D-100

Similar Questions

• No USB port works, code 32.

  Original title: no USB ports work

  All 3 ports on my Asus laptop don't work, here is the error message in the Device Manager ' a driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32) ». Check updates, tried to uninstall & reinstall the drivers, nothing helps. The error message makes me think that perhaps something has disabled drivers, I might have accidentally downloaded a program that attempts to control the usb ports? Urrgh computers, not very good at this sort of thing talk in the language of the toddler please!

  [Moved from comments]

  I suggest you add updates at a time, until find you that is causing the problem.  Then uninstall it and install the rest.

• Satellite L - a single USB port works

  Hello

  I've had this laptop for a few months and I could not do all the USB ports work, the system recognizes all the but work alone. If I check the system it says ports are working properly and that it has the latest driver but when I do anything, a mouse, USB KEY, connect headsets to listen nothing, only one of the ports to recognize hardware.

  Can someone help me?

  Hi alecarrill63,

  It would be interesting to know what laptop you have exactly and what operating system you are using.
  Can you post this important information?

  In your case, I will try to update the Web from Toshiba site chipset driver

  But theoretically, if only a single USB port works, the other ports may be defective and therefore, it would be necessary to replace the motherboard. :(

• HP 15-AC152TX: NO USB PORT WORK

  Recently I bought HP 15-ac152tx and intalled Windows 7 ultimate (64 bit) using the CD player, but none of the USB ports work. I had already installed "Intel USB 3.0 host controller driver" always without success.

  Please give me the right solution for it.

  Hello:

  For the USB3, download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

  Ethernet:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71268.exe

  Video controller:

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72651.exe

• I can't do all the USB ports work - Evesham Style II Mini Office in Windows XP

  I'm looking for the chipset & drivers for my grandaughters computer, AFAIK is drawn next to a reading Speccy.

  O/S

  Windows XP Pro 32-Bit

  CENTRAL PROCESSING UNIT

  Intel Pentium 4 2.80 GHz

  Motherboard

  Manufacturer - Eveshamvale.

  Vend. ATI chipset.

  Chipset model - ID5833.

  Model Southbridge - SB200

  The downloaded manual provides the following information

  Model = P4SBA

  = North Bridge chipset; SiS 651 - South Bridge SiS 962

  CPU = Supports Socket 478 - Supports 400/533 MHz FSB

  I'd appreciate any help possible, that someone can give me as well as the Office works currently can't do all the USB ports work, they worked until I had to change the hard disk, but do not have the installation diskettes or the drivers.

  Hi Graham,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, the USB ports don't work on Windows 7 computer.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  Method 1

  Run this fix - it and check if it helps.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Method 2

  Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  To remove and reinstall all USB controllers, follow these steps:

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

  I suggest you to contact the computer manufacturer and download the latest chipset drivers and check if it helps.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• None of my USB ports work

  My problem is the same... None of my USB ports work. I have disabled by mistake all and then discovered that my keyboard and mouse no longer work. I went into Setup and tried to allow them this way, but it did not work. I can go to Safe Mode and my arrow keys of the keyboard and enter the key work, but when it starts the key job. I am not able to get to Device Manager to turn them back on. I need help.
  TKS,
  Paul

  the work of the previous days your restore is completed.

  Use the restore option!
  Good luck!
  Chambers!

• After a reboot, none of the usb ports work and USB problems-uninstalled USB Ports

  I just bought a Seagate external drive, but none of my usb ports work. I looked into it and followed what it says on the uninstall of my USB ports, bad move on my part. Now, after a reboot, no usb port works, I've tried all microsoft support said to do and nothing seems to work. I think I need to reinstall my usb root hub? Perhaps, but I can't seem to find anyway to do. Help, please!

  Hello

  Check the status of the device in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. in the Device Manager window, locate the USB key and expand the drive, double-click the sub element to check if an error message or error code is listed.

  If there is no error message highlight Bus USB controllers and then click Action select check for material changes.

  You can check the link below: advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575

• I have no power to my usb ports. I'm on a toshiba satellite with windows 7. What should I do?

  My usb ports have no power in my toshiba satellite with windows 7. I don't know what to do.

  Looks like a hardware problem, in which case you will need to contact Toshiba support.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  SC Tom

• Peripheral storage but not with ethernet connection USB port work

  I usually connect my Mac Book Pro with ethernet using the USB port. It was working fine, but since a few weeks, it has stopped working. But the normal usb storage devices only works very well in this port. So, I tried to connect the ethernet to another USB port near the seizure of power, which seems to work very well. So, that means that the other USB port does not work properly. How can I fix? I use Mac Book Pro with the Version OS X El Capitan 10.11.4

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  Shouldn't use you a crush on Ethernet card instead of a USB adapter to Ethernet?

• Pavilion 15: HP not Pavilion no USB port works, that means UEFI diagnostic code

  All USB ports stopped working (as in no popup when it is plugged in and the devices get not power port).

  I did all the thingsm usual as uninstall drivers and re - detect.

  USB port running in UEFI test, I get the following for all three ports

  ID 0URK1V-75E89A-MFPV6J-8D4E03 FAILURE

  FAILURE IF G5FF00EA #ABU

  Searching the Web I can't find what do these codes mean someone at - it a pointers please?

  Thanks in advance

  A hardware failure in the usb on the motherboard controller chip, which means that it needs a new motherboard. Are you still under warranty?

• How to get USB ports work on Portege M400?

  I'm not able to get the memory card flash, cameras and iPods recognized when plugged into the USB port of my M400.

  I've updated all windows software and all the drivers that I can find.

  When a device is plugged in the found new hardware dialog box sometimes - but of course a driver is never found.

  I explored the forum extensively and tried to remove the USB driver in the hope that to restart the drivers would be reinstall correctly - they don't have - in fact the system doesn't seem to be able to find the USB driver at all and now I get a lot of error messages and unknown hardware tries to install.

  I have a backup from 1 day - an image made using real image Neil - trying to restore what I ought to be able to boot from the CD ROM - this certainly does not happen with my current set up - how do I do - no doubt, I have to change something in the BIOS - how to access the BIOS - the manual is particularly short info here.

  So how do the two fundamental problems - I get the USB ports to work - it is certainly a problem with the computer everything works fine when I try these devices on other computers.

  And how the CD ROM is configured to boot from a bootable CD?

  Thanks in advance for your suggestions - this has been a persistent problem that is starting to become quite frustrating.

  Ian

  Hello

  First of all this isn't a hardware problem, but simply the software problem.
  I see that you have tried to install different external USB devices. Most of these devices require special software which is always supplied with the product.

  I put t know what you have installed and removed from the system, but it looks like you've ruined the whole OS.
  In this case I recommend installing the OS from the recovery CD.

  To boot from the CD, you must insert the CD in the CD/DVD drive and press the F12 key immediately after switching on the laptop. This procedure should allow the start menu, from which you can choose the right boot device (ODD).

  Notes; USB drivers are provided by the Windows operating system.

  In addition if you want to use your iPod, you need to install iTunes software! Without this software, the iPod does not work!

  Good bye

• Two of the three USB ports works only on Compaq CQ71 (Windows 7).

  Hi, I have a Compaq Presario CQ71.

  There is a USB port on the left and two on the right. The one on the left works but the two on the right are not.  An "unrecognized" message when you use one of them, but not with each other, however there is power coming from him, as when I plug a mouse to infrared light is turned on.
  Ive updated Chipset drivers and BIOS on Compaq website. I also made sure to do all the updates of Windows. Help, please! Its driving me crazy!

  Did you meet a very old thread... but... I know that with some machines, you can actually disable some ports USB in the BIOS. Take a look here and see if there's anything out there.

• The upgrade to 2.0 for a wireless adapter USB Port work

  Hi, I just bought a USB network adapter wireless, I was able to configure my laptop but when I plugged in my USB Port, I got a message that he needs one more USB 2.0 Port and I must improve my USB port to make it work properly, how can I upgrade my USB port at the top level? Thank you and hope you can help me with my problems... Alice

  Hello

  As Flo don't say, no chance to upgrade the USB ports.

• Printer print printing printer will not align. Worked very well, put in new cartridges and now will not align.

  My HPPhotosmart C5580 all-in-One worked very well.  Put in new cartridges and now she is not aligned.  Have you tried several maintenance task to get it to reset zero, etc, but nothing seems to work.  Help.

  This isn't a matter of Microsoft but a problem of HP; See http://h10025.www1.hp.com/ewfrf/wc/product?product=3575276&lc=en&cc=us&dlc=en&lang=en&cc=us. There are also Forums of HP Support for printers.

• How to get my USB ports working again

  I have a hewlett packard presario CQ61-320SA notebook and my two right usb ports stopped working. I am lost without these elements, what can I do can someone help me please, what about Jill Kellett

  [Moved from comments]

  They are ONLY two USB ports? If this isn't the case, you can well have a hardware failure that would require a repair to a place of authorized service center.

  If they are the ONLY two...

  Go to control panel > view large icon > Device Manager

  Open the Universal Serial Bus Controller section

  Right-click on the first occurrence of a controller, improved and select the UNINSTALL option and follow through with the process...

  Restart the computer and let to re - install the USB controller...