USB stick does not go to the desktop using OS10.11.3

USB drive connected, but does not appear on the desktop. Have already made external drives is checked.

Advertisement

Try this first:

'Reset the controller of system of management (SMC) on your Mac - Apple Support

If this does not work, run disk utility and then plug the USB key. It appears in the left pane of the window? If so, select the drive and try to fix it. Then look in the upper part of the program disc Utiilty for the mount button and try to mount it.

If she does not appear in disk utilities or if it does but the repair will not let you mount on the desktop, try to use it on another computer. The drive may be dead - they are actually more fragile than you think. If you can not read it on any computer, but you can see it in the disc utilities you can try to erase. However for me, when a broken thumb disc I throw it.

Tags: Notebooks

Similar Questions

  • USB stick does not appear on the desktop

    With the help of Mavericks OSX, I just format a USB Flash drive; but the Flash drive icon appears on the desktop.  What should I do to get the icon to display on the desktop?  (I formatted a formerly DiskWarrior USB Flash Drive).

    What format did you use? Check the Finder/preferences/general to make sure that the hard drives and external drives are checked.

  • Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

    I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

    Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
    The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

    Plug the mouse on or off doesn't change anything. Only restart helps.

    Any ideas?

    It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

  • My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports.

    My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?

    Do not use windows update for drivers.

    Update your drivers Lenovo support and see if that helps

    If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work

  • Application does not connect to the server using WAP2.0

    Hello

    I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

           if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
            {
                    //WAP 2.0
                String uid = null;
                ServiceBook sb = ServiceBook.getSB();
                ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
                for (int i = 0; i < records.length; i++) {
                    if (records[i].isValid() && !records[i].isDisabled()) {
                        if (records[i].getUid() != null &&
                            records[i].getUid().length() != 0) {
                            if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                                (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                                (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                                uid = records[i].getUid();
                                break;
                            }
                        }
                    }
                }
    
                if(uid!=null)
                {
                    if(AppConfigurations.DEBUG)
                        System.out.println("Connected using direct WAP2.0....");
                    return ";ConnectionUID="+uid;
                }
            }
    

    I am same ConnectionUID as present in this complete book in Options in the device.

    Even application does not connect to the server using WAP2.0.

    Let me know what other things should I check to make application to connect to the server using WAP2.0.

    My phone is BB 8900 and OS 4.6.1

    WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

  • USB key does not appear in the Finder or Desktop

    Using the latest version of El Capitan on a Macbook 12 "and then plug a SanDisk flash drive in the USB - C drive: the device does not appear in the Finder, at all, not under devices in the sidebar, or anywhere in the Finder. Also it shows only intermittently on the desktop. Of course, this makes the useless car.

    I found that the USB 3 restart MB with 3 USB stick connected via an adapter to the port of C rises. But we must secure it by Apple with an update of the firmware; We should not need to use workarounds to get 3 USB works through much touted app one port USB C.

  • Norton toolbar does not work on the desktop but works on laptop. Shows desktop toolbar off, but there is no button 'enable '.

    The Norton toolbar does not appear on my desktop version of Firefox 24.0. It does not appear on my portable version of Firefox 24.0. The office shows that Norton was disables as incompatible with 24.0. But there is no button 'enable '. How to do back toolbar Norton?

    I remember a staff of Norton said several times that it may work better if you update Norton before update Firefox to the next version again.

  • USB stick does not (need to format, cannot format)

    Yesterday I tried to install Kali on a USB key. After the installation, however, the computer does not in it. In Windows, I tried to access it but it says "You must format the disk before using it." So I clicked on the format, but it said "Windows couldn't complete the format". After this, when I try to access the USB, it says "insert a disc into _. I tried to reinstall the drivers and disk management (it does not even detect the USB). What should I do?

    After a few hours of an atrocious, I came across the answer! Click computer-> manage-> disk-> In the LOWER SECTION, the volume of your flash drive will be visible and he'll say no 'allocated' (it will not appear at the top)-> right click and select "New Simple Volume" just and -> spam the button next to the time. : D

  • BlackBerry Smartphones BB does not synchronize with the Desktop Manager

    Suddenly, my BB 8220 does not synchronize with my Desktop Manager. He tries to synchronize the calendar and then I get an error message: BlackBerry desktop has encountered a problem and needs to close. It should also synchronize my contacts and tasks, but does not get it until now. My DeskTop Manager is version 4.3. All solutions?

    Hey ShelleyPringle,

    Welcome to the community of BlackBerry Support Forums.

    I suggest you upgrade your BlackBerry Desktop Software and then try to sync.

    Go to www.blackberry.com/desktop to get the software and then try to perform the synchronization.

  • After downloading an application, it does not appear on the desktop

    I downloaded a few apps and they do not appear on the desktop of the tablet.  Where are they?

    The fix was to get this 'thing' out of 'Safe Mode'.  It took my not irritable librarian to ask that question and that solved the problem.  But thanks for trying.

    Ron

  • items of tag p does not show on the pages using css

    I converted to a site in GoLive to DreamWeaver and all the text by using the < p > tag does not appear on the site, but other styles appear, including < h1 > tags, etc.

    -J' have confirmed that the links to the css are correct and tact.
    -J' I cut and pasted the text in the < body > tag, which is the same specification as the < p > tag in place to check that it was not a typo. Did not help.
    -I have tried with and without the <>brackets.
    -J' have changed a paragraph in the page 'None' and used the < br > tags to make the jumps and it shows very well, but the next paragraph which uses the < p > does not work.

    Any thoughts on why this would happen?

    Here is the link of the typical header that I use
    < link href = "adv01.css" rel = "stylesheet" type = "text/css" > "

    Here is the actual line css
    p {color: #333; do-size: 13px; do-family: Helvetica, Geneva, Arial, SunSans-Regular, without serif; line-height: 15px}

    Thank you
    Jon

    Well, if you have a page on defined style that affects your diplay with white text paragraphs. This might be a reason.

    On your page privacy.php watch line 21;
    p {color: #fff;}

    the parameter of color to the fff everything make your text are white.

    Don't forget that on the styles page to replace the external styles.

    I hope this helps.

    Since you are using includes can't tell you where this code exists!

  • External USB mouse does not work in the context of Satellite L

    Hello, my name is John Cooley, and I have a problem that your FAQ do not have a category.

    Because I've had this laptop as a gift in October 2011, I was using a mouse that was provided by the company, by that I was hired and in no time I had no problem with the mouse.
    I'm no longer with this company and have not been for the past ten weeks, but it's not my problem.

    My problem is that for some reason any after working properly for about two minutes, I get an error message indicating that the USB hubs on the right side of my laptop will not recognize the mouse which is very annoying, because I am also using a dongle for access to the internet using these same hubs (which by the way (, never having this problem) because it works in all USB hubs without problem, what I can do.

    My question is not why this is happening but what should I do so that I can use the mouse.

    Please don't suggest I have stop using the mouse and rely solely on the touchpad.
    Unfortunately for me I find using the key exercise lose more time because I don't have three hands and that's what you have to do everything done a mouse.

    With respect,

    John Cooley

    Hello John

    On this virtual path, it is not easy to say what the problem is here. Before you begin to discuss your problem, please, let us know what model phone you have and what operating system is preinstalled.

    Have USB ports for laptop on the left side?
    Have you tested?

    I also want to know is: do you have this problem USB I have general or simply using this external mouse? I mean, have you tested with some USB memory stick or GSM connection by USB cable, not only the dongle to access internet?

  • USB loader does not work with the Defy

    Hey people,

    I myself built a USB socket for installation in my car (in a plug for one of the slots to spare for switches). Technically, it's really simple with a voltage of 5V regulator which limits the 12V battery voltage to 5V for USB. Because I want to only use the sockets to recharge USB devices

    (iPod, phone, GPS,...) in the car, I left the data open pins. Today, I hung my little gadget up to a power supply of 12V, measured at the exit of the catch USB for correct voltage and polarity and then hung my Defy. Unfortunately, it does not work. I was pretty well clueless, what could be the issue so I asked some of my colleagues to hang their phone (HTC Desire, HTC Hero and HTC Desire HD), and each of them has worked well.

    Someone has any idea of what I need to do to get this working? He wants to talk to the USB to determine what port it is connected to a Motorola phone (for some reason any)?

    Thank you very much!

    Jan

    For your application, simply short-circuit the data pins.

  • Folder that does not exist on the desktop

    It is the first time I saw this problem in all my years of using all versions of Windows. I have a folder on my desktop. It is empty, so I tried to remove it and got a message saying: it cannot be deleted because it isn't here. I tried to rename it with the same result. I did a complete search in the register the name of this folder and it came negative.

    I opened the folder and was able to add a file to it. Then I searched my C drive for that file and is found, but the search does not find the file. So I can't delete, rename, move or copy this folder.  Anyone know how I can get this file on my desktop?

    Thanks for any help you can give me.

    Eileen

    You may have a problem due to the use of some not printable or other special characters.

    Open a command prompt, change to the directory where this folder is located, and type

    dir /x {Enter}

    That should show you the "short name" (i.e., 8 characters) for the folder.  Your file should show that

    ELITTL ~ 1

    Now, make an order of RD using the short name:

    RD ELITTL ~ 1 {Enter}

  • Logitech USB mouse does not work after the upgrade to Windows 7

    I have a HP Pavilion DV6XXX laptop computer series (MS Vista Home Premium has been loaded from the factory), recently updated with Windows 7 Home Premium.  It is then this problem began.

    Wherever I am, everything I do (typing, surfing, reading) my cursor made a break of about 3 seconds, 26-28 seconds.  This interruption is making me crazy!  Everything what I'm typing, the cursor becomes unavailable for 3 seconds.  Everything I typed is gone.

    My laptop has a touchpad, but I use a Logitech USB mouse.  I can't disable my touchpad, but that does not change.  In addition, it is matter if I type or not: my cursor disappears for 3 seconds, 26-28 seconds.  I can sit and watch it.  I have disabled the touchpad, unplugged the USB mouse, find the updated HP drivers and Synaptics to nothing does not.

    Looking for other suggestions.

    Original title: cursor refreshes frequently

    Hello

     
    Thanks for posting your query in Microsoft Community.
     

    I understand that you have problems using the mouse effectively on Windows 7 computer.

    (1) what is the Logitech mouse model number?
     

    In the meantime, please follow the following suggestions to solve the problem.

     

    Method 1: Try to put your system in a clean boot state, which helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

    How to perform a clean boot in Windows

    Note: Referring to "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after troubleshooting.

    Method 2: You can follow the link and identify and correct the mouse, touchpad and keyboard problems in Windows.

     
    Mouse, touchpad and keyboard with Windows problems
     

    Method 3: If the above does not help then, try to get the latest drivers installed for the mouse and see if that helps.

     
    Support
    I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
     
    Thank you

Maybe you are looking for

  • Macbook Air battery life

    On my 13 "mid 2012, MacBook Air, I had just completely loaded the night too many MacBook and I needed to bring it to school. I checked the battery and it said '100% ', but when I checked the time remaining, he says "01:29. I thought it was weird and

  • Why Quicktime suddenly gives me errors of version and vulnerability for v QT 7.6.6 after updating to firefox 22?

    After the forced 22 Firefox update, Quicktime fails with an error ' version 7.6.6 vulnerability. " I am running OSX Snow Leopard 10.6.8. The plugin Firefox (Tools/Add-ons custom) also shows the vulnerability. More suggested solutions AND the Firefox

  • constant anti virus reports when using firefox

    I constantly receive anti alerts of virus using firefox I was not do this with the Explorer, it seems to be related to the "search request". I get this message "windows cannot find"C:\Users\FAMILY-1\App Data\Local\Temp\NEW26A4.tmp.exe". Make sure you

  • Unable to watch live TV, works in tests

    Original title: Media center TV All of a sudden Media center TV does not start. When I reconfigure the settings of that TV works in tests, but does not open when I click on live TV. Help?

  • Cd need to restart?

    Hello world. On behalf of all those that forget to say 'Thank YOU FOR YOUR HELP' (including myself) THANKS for TRYING to HELP EVERYONE and registration we probably a good chunk of money. Follow the good aid flowing. Now my question is: How can I get