USB stick not capable for readyboost

I have hp v210w reader pen 16 gb. I used this device to readyboost option provided by microsoft windows 7. but now it is said that this device cannot be used for readyboost, the device does not have the performance characteristics required for use in speeding up your system.

I want to use this device to readyboost. So please help me solve this problem?

Hello

ReadyBoost need to access the device all the time and anything can die. He cannot live forever after a number of read/write. Performance reduces and don't meet ReadyBoost requirments. They are very cheap now, throw it in the trash or use for anything else and buy a new one.

Kind regards.

Tags: HP Desktops

Similar Questions

  • I am unable to use USB Stick 2.0 as ReadyBoost

    I'm playing a game that needs 4 GB of memory RAM. I have 3 GB. I heqrd that you can increase the RAM using a key 2.0 usb. Then I turned on Sysmain and tried my USB ReadyBoost. But it says:

    This device cannot be used for Readyboost.

    ReadyBoost is not enabled on this computer because the system disk is fairly quickly, so that the computer problably ReadyBoost will not accelerate.

    Problem well here, I will not speed up the computer I want to just play the game who does not start without RAM of 4 GB.

    So, how can I fix?

    Original title: Readyboost

    Hello

    ReadyBoost is not a replacement of ram it's disk caching.

    ReadyBoost in Windows 7 supports 8 drives and a total of 256 GB. For each device - the
    device must have an access time of 1ms or less. The device must be capable of 2.5 MB/s
    read speeds for 4 KB random reads uniformly over the whole device and 1.75 MB/s
    Write speed for 512 KB random writings spread evenly on the unit. On a FAT32 device
    the cache is limited to 4 GB and on an NTFS device, the cache is limited to 32 GB (these are on)
    a device).

    Explore the features: Windows ReadyBoost<- shows="" how="" to="" set="" it="">
    http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

    Understand the ReadyBoost and the question of whether it will Speed Up your system
    http://TechNet.Microsoft.com/en-us/magazine/ff356869.aspx

    DON'T GO OUT AND JUST BUY A READER WHO CLAIMS THAT IT IS READY - READYBOOST
    many of them are or stretching at least the truth. Look at the sides of the player below and buy
    a you know is FAST.

    Don't forget that the readyboost max cache is 4 GB Vista and 256 GB Windows 7. If your device
    is more than you can use it for storage. And you need a fast reader.

    ReadyBoost - list of speed Flash memory
    http://www.techcrater.com/2007/04/05/ReadyBoost-Flash-memory-speed-list/

    How to find the index of ReadyBoost speed
    http://www.techcrater.com/2007/04/06/how-to-find-ReadyBoost-speed-rating/

    Speed tests USB Flash Drive - any size car - link to the utility USBDeview
    http://usbspeed.NirSoft.NET/

    Publish a speed test of your USB - also a link to the utility USBDeview flash drive
    http://usbspeed.NirSoft.NET/publish_usb_flash_drive_speed.html

    Keep an eye on ReadyBoost with Windows 7 performance monitor
    http://blogs.TechRepublic.com.com/window-on-Windows/?p=2257

    Monitoring of ReadyBoost on Windows 7
    http://blogs.msdn.com/b/saveenr/archive/2009/05/02/monitoring-ReadyBoost-on-Windows-7.aspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • HP require a new 32 G USB stick "" not labeled as compatible with Win 8."

    OS Win Pro 8.1

    Product: HP500-125

    Question: HP Recovery set using the USB.

    Problem: HP require a new USB stick 32 G ""not labeled as compatible with Win 8. "I don't have to buy such a stick in my place (Brisbane, Australia).

    Can you help me?

    CherylG.

    I have for the usb drive that you suggested, and it happened today however it does not resolve the difficulty, even if the product is satisfactory. Consults with the HP support has finally confirmed that the provided HP recovery media software does not work with Win 8.1Pro with media library.

    So, in a way, the problem is solved by default... I used successfully in place of Windows Recovery Media Creator.

  • USB stick not recognized when you try to copy network settings

    trying to Setup network printer and need to copy my network settings on a USB stick and transfer to the printer wireless.

    When I plug the USB in the system recognizes the disk put option on the screen doesn't change to the other to allow the settings file be saved.

    I tried 2 different laptops and 2 different usb drives.

    Hi GavinStrik,

    You can try to reformat the usb drive and check.

    You can try to plug the drive and make a backup of the data and try to format the drive.

    Note: Before you reformat the player take a backup of the data.

    For more information, please visit the following links:

    Formatting disks and drives

    http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

    Hope this information is useful.

  • HP a6554f: Front USB Ports not working for a6554f

    Hi, I cleaned the dust from my computer yesterday for the first time because the computer kept crashing. I removed the motherboard, so I unplugged everything that was clinging to her and I also removed the hard drive then plugged everything once I had finished, (do not know if I just plugged in as it was, even if I took a video of it, but the wasen can't good quality so I had to guess a little). I also added thermal compound to the cpu.

    Anyway, everyhting seems to work except the 2 usb ports front of the case. It was working fine until I opened the case (this is why I do not open the computers, but the dust was just too). The audio ports and microphone located in the front work correctly. And the rear USB ports are working properly.

    What I've done so far is running pilot Booster and also I went to Device Manager > USB Bus controllers, then I turned off everything on the list, then allowed them again. And nothing has worked.

    I don't know much about computers so I don't want to go to the hassle of opening the case cause once again I was scared lol but could I maybe hooked up a cable in the port of fake?

    Also, is there a diagram to show where each cable goes to the a6554f model?

    As you pointed out the audio before and MIC ports are working, then it might be just the plug for the ports before USB is not properly or is in the wrong place.  Here is a page that relates to the motherboard. In the lower right corner of the image or the page layout scheme, there are two blocks header before normally taken into USB ports.  Says F_USB1 and F_USB2.  Either we must work to the front ports.  Check to make sure that the wiring box beam (which has the wires going to the front USB ports) is connected on one of them.

  • USB stick not recognized by the computer. Have tried all the options I can think about.

    Very well.  I have a S-Mini Patriot 32 GB flash drive that does not recognize my HP Slimline 400-434 Windows 8.1. In my view, he acknowledged once and has refused to do since. My laptop (Windows 7 Toshiba) recognizes very well.

    All other devices USB function perfectly on this computer. USB hub mouse, keyboard, USB, cable Apple iPhone.

    1. I tried to unplug all other USB devices before trying this one. IN CASE OF FAILURE

    2. I went to device management and the USB does not appear in the list. IN CASE OF FAILURE

    3. I uninstalled the USB root hubs and restarted the computer. IN CASE OF FAILURE

    4. I tried to plug in the USB ports on the back that plug directly into the motherboard. IN CASE OF FAILURE

    5. I have updated the drivers, and have been unable to find a update of the BIOS as the link on the HP download site and told that it is incompatible to my computer. IN CASE OF FAILURE

    .. then what the hell gorram bloody I do now?

    Good and the most ridiculous way, I never solved a technical problem...

    Failed to insert the USB flash in the port. She has to insert slowly, so that the contacts are aligned.

    I found it trying to connect to it in my USB hub and noting that the witness red light was going on and outside that I inserted the USB key, flicker on as I inserted it there and then off once it is all the way in.

    Weird. But good. It works now.

  • USB stick not recognized even on other computers

    Hey-

    A few days ago I plugged in (USB) flash drive of 512 MB on my desktop Dell (Windows Vista), and that bubble "USB device not recognized" come at the bottom of my screen. I tried to put in the other USB ports, ports on different computers and the same message appeared. This device seems not more in Device Manager (do not even like a disc without a name). This worked perfectly well before flash player. Is there a formatting problem that must be corrected in my USB key, or what is the problem?

    Hello

    If the drive is not recognized at all then you cannot format it no more. Disks wear and/or
    go wrong. Most manufacturers of Thumbdrive have Support FAQ, which 'could' help.

    How to format the USB drive and memory with NTFS
    http://www.online-tech-tips.com/computer-tips/format-USB-NTFS/

    Format a Flash DRIVE with the NTFS file system
    http://www.pctipsbox.com/format-a-USB-drive-with-NTFS-file-system/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • v210w 32 GB USB stick: not able to do "32 GB hp v210w" bootable

    I use Yum Installer multiboot to create bootable sticks. A few days back I bought a 32 GB v210w USB key. When I make it bootable, it is successful. But when I try to boot my laptop with the USB key, I'm not able to boot from it. Please help me what's wrong with this USB key.

    You can read the content and you try to start it from another computer.

  • 1 t verbatim USB stick not recognized by the system and will not work

    I used my USB from Verbatim 1 t hard drive in the past and it still works on my Vista computer, but know is is a USB 'unrecognized' device and does not work on my XP.  In the system hardware listing is visible, but there is no driver for it and not available from my computer.  This disc is missing?  How can I get this, my backup disk, of the function?

    Hello

    Try the steps of troubleshooting mentioned in the links below and check if the problem persists.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    Note:

    BIOS change / additional settings CMOS (semiconductor) to oxide of metal bad cancause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

    http://support.Microsoft.com/kb/314634

    Note:

    Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    How to back up and restore the registry in Windows

  • USB stick not recognized by any computer

    Two days ago, that I restarted my computer for the updates to be installed. By mistake I left my USB drive (8 GB Sandisk) plugged during the entire process. Now, my computer, or any other computer will recognize. Sometimes the light and sometimes it turns off when I plug. I went to disk management, but it does not recognize. The only sign that it always works, it's recognized as USB human interface device. Any ideas on how to fix or is longer that it won't work? X.

    The USB is damaged. Throw it out. If the data on this subject are crucial and you have not saved it elsewhere, you can send the USB drive to a professional data recovery company, but it will be quite expensive. If you want to explore this avenue, I recommend to drive savers . MS - MVP - Elephant Boy computers - don't panic!

  • USB stick not recognized by Device Manager

    I have a USB drive which worked in my Vista SP2 machine for 2 years until I took it.  I tried to run recently.  Even if the machine recognizes the connection and the removal of the disc with the bong audio, it does not appear in my computer, in the Manager device (like a USB Mass Storage Device - hidden or otherwise) or in the management of Computer Management(for doing fdisk/format functions) disk.   When I insert or remove the disc, the lists of USB in Device Manager do not seem to change.

    I tried to delete infcache.1, but in vain.

    The player with the same cables and the power supply, is recoqnized and works with other systems my Vista SP2 and SP3 of XP so I can exclude it as does not.

    Dig dig into that.  The pilots were to be reloaded, I noticed there is a USB 2.0 mass storage device listed while Vista searched through the database driver.  As soon as it is loaded, the name was changed to Cypress AT2LP (chip Cypress is the controller of housing) and the drive has disappeared.  Did a search for this and it seems that it is a problem running under Vista (drive works forever and then one day things change after an update to Vista).  Rename the driver (CYUSB.sys) and then reboot didn't help.

    I took the car to the most recent machine Vista and noted that the pilot has been there for a (USBSTOR Generic USB mass storage device. (SYS).  The drive works now.   Not sure where this storage of Cypress driver came (I certainly didn't not using it), but that was the problem.

  • USB connection not detected for Samsung Fascinate

    I have a smart phone Samsung Fascinate 1500.  When I connect it by USB to my computer, the computer no longer detects it as a media device or mass storage mode (although it worked fine the first few times).  The phone also does not detect the connection and simply seeks to charge the battery.  I downloaded the latest drivers and tried allowing pop ups without success.  Any ideas?  I cannot download my music, and it's a lot of time to transfer photos by other means..., including that I had to buy a SD card adapter.

    The USB port works with other devices.  I don't think that the USB cord to my phone is the problem, as others have shared this problem in other forums.  Does anyone have a solution?

    Hi Lin,

    1. have you tried to connect the phone to another computer?

    2. have you made any recent changes of hardware software on the computer?

    Test the device on another computer. Additionally, make sure that the software provided with the Samsung phone is updated.

    Please visit these links for more information:

    Install a USB device:

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-USB-device

    Problems with USB devices:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    I hope this information helps!

  • USB stick not recognized when creating recovery disc in Windows 8.

    Original title: Recovery Media Creator prblem

    Hello-I have a desktop K430 Lenovo with a 1 to HDD, Win8 64 b, 12 GB of memory. I'm trying to create a recovery disc using a flash drive HP with 32 GB. I bought a 2 GB Tech Universe that should do the job, but the Recovery Media Creator suggest 16 GB.

    I installed USB Flash Drive 32 GB HP which is identified as HPv125w (F): the computer and selected for how to manage the unknown data or take any Action. I formatted the Flash Drive ENF to match my file system. I also chose computer /Devices removable and open as portable devices in the hope that the flash player would be recognized by the Recovery Media Creator, but it didn't happen.

    I run the following command to create a Recovery flash drive:

    Control Panel/All Control Panel Items/Recovery/create a recovery disk/copy the recovery partition from the pc on the recovery drive (I checked this assertion). I clicked NEXT to continue the process.  I was instructed to connect a USB and the reader must be able to contain at least 16 GB. He also said that everything on the disk is deleted. Identity of the flash player (HPv125w (F) does not appear on the page of recovery media and THEN is grayed out. I need help with this problem.  After checking the Microsoft Community, I learned that I could use search from the start page or opening of office and enter recoverydrive.exe and make appear the Recovery Media Creator. I performed this task once again, but I got the same results, as shown above. Thanks in advance.

    Hello-I have a desktop K430 Lenovo with a 1 to HDD, Win8 64 b, 12 GB of memory. I'm trying to create a recovery disk

    Identity of the flash player (HPv125w (F) does not appear on the page of recovery media and THEN is grayed out. I need help with this problem.

    You can also try using diskpart to his list volume control just to compare his view of this device.

    BTW, there is another user of Lenovo, who tries something similar but without keyboard to help...

    http://social.technet.Microsoft.com/forums/IE/en-us/04e45c11-b5c0-48b0-AB58-3f96a1040e40/how-to-restore-Windows-8-from-a-recovery-USB-on-a-Tablet-Wo-physical-keyboard

    I think that it may actually be further ahead than you?    ; )

    Good luck

    Robert Aldwinckle
    ---

  • USB device not recognised Message appears several times-no USB devices are connected

    About every ten seconds, I get a pop up bubble telling me that my usb device is not recognized and I need to somehow fiz dysfunction. Problem is, I don't have a usb drive connected to the computer and have not used a recently. How can I make this stop message that appears when I don't have a reader to fix?

    USB is not just for readers.  Keyboards, mice, modems, printers, and other devices can use a USB connection.

  • How can I fix the USB ports on work for Vista?

    I have Windows Vista basic and USB does not work for all devices when they are plugged in. I get the message "devices connected to the computer USB has malfuctioned and Windows does not. "I also noticed that in the pilot do message"No driver for this device"Port_ #001.Hub_0007 ' if plug all devices including a USB key or a mouse, goed by single power. Any ideas how hard to pull of this problem.  Thanks in advance

    You can try to go to Device Manager and uninstall all the drivers remove all listed (only the hubs and not others) cos of your terminal and restart your computer. After restarting plug your rear hub.

Maybe you are looking for

  • What is pluggable software components ActiveX?

    What is activex software components-ins mmc

  • Shuffle in Windows Media Player does not

    The shuffle does not work in Windows Media Player.  He plays a song I start with and then everything stops.  I can't find anything in the box options, which is about the limit of my expertise.  I tried to disable playback random and turning back on,

  • Upgrade space H9-1187 video card on motherboard

    I have a HP Pavilion h9-1187 windows 64 - bit pc with nvidia GeForce GT 530 by default.  I need to upgrade the video card, but this motherboard has only one of pci express 16 3.0 slot.  Almost all decent video cards require two slots.  I guess that m

  • Help database to start

    Hi, I downloaded the sample of waterfalls on the "Quote" database project What has intrigued me is that a *.db file is included in the project. My question is, 1. is it possible to create a *.db on the fly? 2. someone could kindly provide examples of

  • Eception exception: java.lang.Error when persisting the data...

    Hi all I am facing this error persisting my data. I followed the example provided to http://NA.BlackBerry.com/developers/resources/A13_Storing_Persistent_Data_V2.PDF First, I copy paste the code in a project. It was working fine. Later I managed for