USB superDrive does not hub

Similar Questions

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• MacBook Pro 13 "Retina Display Usb Port does not... !!

  MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

  Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Satellite L300 - Vista - Touchpad and USB mouse does not.

  Hello

  Well well after hours of trying allsorts, I post here...

  Been given the laptop for repair as the touchpad no longer. No problem "I thought", simply plug a mouse usb to help me get around and re - install the touchpad... what a joke.

  On the right, the USB mouse is recognized as a hid device and work, according to the Manager of devices, but not when you move it... nothing...
  The Touchpad is listed as a Synaptics ps/2 touchpad and signals a Code 10 in section mouse device as well as listed as a hid and fully functional usb mouse Manager.

  Right... I have...
  Listed all devices, even the hidden nonpresent (devmgr_show_nonpresent_devices) and removed everything only account of any mouse, keyboards, etc...
  uninstalled the software synaptics via the program Panel.
  Restarted the laptop, and it starts with the touchpad is ranked again code 10 with the version of windows drivers.
  Drivers up to date using two different files of Toshiba for the touchpad, still Code 10
  Still, the USB mouse does not either.

  Someone enlighten me please on a fix for this...

  Hello

  Really strange what s my friend because normally a touchpad driver update should solve the problem.

  In any case, have you ever tried to use the Toshiba Recovery disk? Maybe it s just a software problem and a few important Windows files are destroyed or don t work properly. Reinstall Windows using the recovery disk Toshiba takes only a few minutes and there are already all the drivers and tools integrated. With these parameters (factory settings), the touchpad should work properly, and if not the touchpad or the motherboard needs to be replaced maybe.

  Good bye

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• USB keyboard does not work laptop computer whis Satellite A100-012

  I have install WinXPpro and my usb keyboard does not (id error 10). I have try 3 different usb keyboard. Other usb devices are working normally.
  Windows XP Home Edition reanimation keyboard drive works normally.
  I have install the chipset and latest bios drivers. What can I do to make my keyboard work in WinXPpro?

  Hello

  Don t know why the USB keyboard may not be recognized, but I recommend suite solution:

  1. click on start
  2. right click on my computer, click Properties
  3. click on the Hardware tab
  4. click on the Device Manager button.
  5 expand the Universal Serial Bus controllers section.
  6 right-click every device under the Bus USB controllers and click on uninstall to remove them one at a time.
  8 restart the computer and let the operating system reinstall the USB controllers.
  9. plug the removable USB storage device and perform a test to ensure that the problem should be solved.

  good luck buddy

• El Capitan USB port does not worked well under Yosemite.

  Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
  Has worked perfectly under Yosemite unfortunately too long to go back.

  The USB port does not work with other USB devices?

  I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.

  http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1

• S540 keyboard and the usb keyboard does not.

  Hello

  Suddenly, my keyboard doesn't work. Fn keys as reduce brightness works, but turn off the sound button doesn't work at all. In ubuntu, everything works fine and if I connect to my computer it works too, but if the computer connects to it stops working. In safe mode it does not as well. A usb keyboard does not work in windows as well.

  Does anyone have the same problem or solution?

  Yours sincerely,
  Joost

  Hello Martiniturbide,

  Just update Windows 10 built 10568 and it solved the problem somehow. Thanks for the reply. I hope that the problem is not well...

  Greetings,
  Joost

• All my work on usb processor does not open.

  USB

  All my work on usb processor does not open and the window instructions says it could have been changed or moved, but have not changed or moved files and folders become EmailXtender.  Please help find the files as important documents and letters are on usb.

  You must NEVER use Word to change the USB files as it is almost guaranteed to cause the corruption or loss of files.  Working on the files on a hard drive and then transfer it to USB.

• USB key into the USB port does not appear in 'my computer '.

  Original title:-drive Flash USB port does not appear

  I have laptop Dell A 4 years and cannot use USB ports. My data flash drive lights flash but nothing shows up in 'MY Computer'

  It turns out that there is a problem connecting to the motherboard... so it ' s not worth repair. However, I believe that I can connect to the Internet by the yellow cable supplied with the router. There is also a card I can buy known as PCMIA card that will give me 2 additional USB ports. It's cheap enough to give it a try.
  Once more a big thank you to all those who have offered their advice on this matter. I'm amazed that so many people are willing to give of their time to help a novice

  Terry

• R500 + Dock + fingerprint USB keyboard does NOT work properly

  USB keyboard does NOT work before Windows logon. (Start-password to type with the laptop keyboard) Also the external keyboard fingerprint reader does never work in this configuration.

  (With my old Z60m, same keyboard and docking station even works well, except the startup password must be entered with the keyboard, the keyboard USB fingerprint reader does NOT work at this point.)

  R500 2732-6AG Vista Business

  Battery ThinkPad Advanced Mini Dock

  External USB keyboard with fingerprint 41A 5262

  Jochen

  New software of fingerprint for ThinkPad R400, R500, T400, T500, W500, W700, W700ds, X 200, X200s, X 200 Tablet, X 301 does not support the external fingerprint reader

  Click here to view the details of downloading new software.

  Click here to view the details of download for older software.

  On the software page oldest, you will notice that the keyboard agroenvironnemenaux USB and USB fingerprint reader.

• Series USB drivers does not start error: "this device cannot start. (Code 10) »

  Hello

  I have a usb_dev_serial.inf of TI and a catalogue of security usb_dev_serial_amd64 and a folder containing the amd64
  the DLLs below.  When I used the Add Hardware Wizard to load the .inf, properties of the pilot were "this device cannot start. (Code 10)"
  Does anyone have a suggestion?
  Thank you
  Larry

  Hi Larry,

  Thanks for posting in the Microsoft Community Forum. According the description, I understand that the USB device does not work, rest assured that we will do our best to help you with this problem.

  Answering the question that helps us provide the best solution:

  1. it worked before?
  2 have had any changes made to the computer before the question?

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  Try the following and see if it helps.

  Method 1:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers:

  http://support.Microsoft.com/kb/943104

  Method 2:

  Install the latest driver for USB and check if that helps.

  To do;

  a. click Start, type devmgmt.msc in the start search menu.

  b. right-click on the USB device and click on Update driver software.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Try connecting to another USB port and check if it helps.

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.