USB to serial Trpp lite

Similar Questions

• (satellite a60) (USB) Universal Serial Bus controller

  Hello, I just formatted my laptop and now when I goto the Device Manager I see an icon missing drivers. I already have a full windows update. Its about "(USB) Universal Serial Bus controller". I tried to find the drivers to support page here to toshiba, but when I tried to install it, it says that it can be installed with SP1 and I have SP2. So my question is, where can get the drivers for it?
  Thanks for any help.

  Hi vivendi.
  have you tried to uninstall SP2, to install the drivers and reinstall SP2?

• 3515 microtour pro: Pro 3515 tour Windows 7 (32-bit) - (USB) Universal Serial Controller Driver - location

  Hello

  I updated a Micro Tower 3515 Windows XP Pro to windows 7 pro (32 bit).

  I now need to find the location of the (USB) Universal Serial Bus controller as that were not found under the DEVICE MANAGER.

  I've been on the Support site, and while he acknowledges my Tower unit and displays a list of downloadable drivers, the USB controller is not listed. I also installed the support Assistant software,

  Can anyone suggest a way to install the appropriate driver.

  Thanks in advance

  Martin

  Hi, Martin:

  Download and install the driver first on the list from the link below and restart the PC.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• USB to serial

  I want to pass random numbers from one pc to another via USB converter series.

  But when I try to launch it I get the message on my laptop of Tx.

  Although I have installed the USB driver to the module series and USB to serial module also appears in 'VISA Interactive Control'

  Can any body watch my VI and the attached images and guide that is the problem. I'd really appreciate your efforts in this area.

  JK

  (Note: on another laptop it is another converter USB to serial to receive these random numbers)

  

  I fixed it myself thank you everyone

• prolific usb-to-serial com port driver problem. I can't load the driver from propper for her. What should I do?

  prolific usb-to-serial com port driver problem. I can't load the driver appropriate for that. What should I do?

  Hello edmcski,

  This thread has been created in the Feedback forum. the Microsoft moderation team has moved this thread on the forums of hardware and drivers.

• USB to serial problem (error - 1073807342)

  Hello

  I have a question regarding the use of third party cable converter usb to serial. I'm trying to interface with a GPS using this cable. Using the VI, I have no trouble communicating with Labview on my laptop, but when I transfer the VI on my work computer. He gives me an error.

  -1073807342 error to the node property base series (arg1) write and Read.vi

  Possible reasons:

  VISA: Invalid resource Reference (Hex 0xBFFF0012) specified. Parse error

  I use the same version of Labview on both computers, Labview 8.5 and the only difference between the two machines is that my laptop using Windows Vista and my work computer Windows XP. I installed the driver for the cable in both machines. I tried to communicate with him using HyperTerminal and that works. The VI contains that a modified version of the GPS VI from labview and serial basic read and write of VI.

  I tried to use MAX to see if something happens. But the device status says:

  MAX could not log on VISA to this static device. The device has not been returned to VISA when searching for resources, but MAX has been able to use VISA to analyze the resource name.

  Any ideas?

  Thank you

  Mandy

  Hey Mandy,

  Looks like you have not NI-VISA on the work computer. Try installing with the Manager of cable and you should be good to go. You can get the latest version of NI-VISA here.

  Good luck

  Lab

• USB-to-serial VISA read problems

  Hello

  I'm trying to control several mass flow controllers attached to a hub series Alicat BB9. The hub is then connected to the computer via RS-232 series. The computer on that what is done is not a serial port, so an adapter series / usb is used. When it is plugged in, the computer (XP) recognizes the series / usb and requires a driver. I installed a driver from the manufacturer of the adapter, downloaded from the internet. The same driver is used on another computer (Vista) without any problem.

  I am able to verify that the device is installed and operating correctly via the Device Manager. I am also able to see what the device COM port is turned on. Opening OR measurement and Automation Explorer (MAX), I am able to see the COM port listed under serial devices. I am able to validate the port settings and open a VISA session with the device. However, any time I try to read from the device, what happens to expired. I get the error xBFFF0015. I have for the parameter timeout at 5000 and 10,000 without change.

  When you run a VI that is used in the laboratory to control the same configuration, I can trace the error to a VISA read Subvi. The returned 'buffer' is not a value and will raise an error. I can plug the USB key into a laptop that has the same VI and it will run without problem. The Subvi "VISA read" return a value when running on the laptop.

  I'm under LabView 8.5 and 4.4 of VISA.

  If anyone has a suggestion that could get this to work I would appreciate it a lot. Also, I am a graduate. student who is working on this issue and my understanding of LabView is not terribly large, so dumbed-down responses would be nice

  Thank you for your help.

  Connor

  Thank you for the follow-up. However, I was able to solve the problem already... It was simply a driver update that solved my problem. The driver being used is "Prolific usb-to-serial" and version 1.. I upgraded 2.0.2.1 and it works fine now. I thought I had updated to the most recent before and apparently I had not... kind of delay. But thanks anyway!

• The port adapter driver prolific PL2303 USB-to-Serial fails to install

  I am installing a cable adapter USB - to - Serial-PL2303 prolific port 1 '. This is done by cutting. It seems that many people have not all the problems, and they have XP, Vista and Win7 drivers available for it. I downloaded the latest installer for the Vista driver from the prolific website (http://www.prolific.com.tw/eng/downloads.asp?ID=31, 02/12/2009). The driver said that he installed. I then perform a restart. After the system is installed, I plugged the cable. Windows detects I inserted the USB key and displays the dialog box drivers you are looking for. Weird, I thought. I click to observe the Statute and it ends with the message:

  "USB prolific to serial comm port (COM4) - failed".

  In Device Manager, it shows an exclamation mark next to it. If it's a Vista driver, why it fails? What can I do to get this install?

  I also have another Vista machine I tried on, just to see if it was this machine or what. She doesn't have too!

  Thank you

  Thanks for the quick response. I was not the installation as the link "Run as Admin" as a first step, even if my account has administrator rights. But yes, so I started to do this, no change.

  However, I am happy to say that I found the problem! After the announcement, I did a search in these forums and came across another post that had a lot of comments... someone in whom we posted a link to the drivers that I had not tried. The thread is here: http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/a366f74b-9853-4cae-95c3-4249172951da .

  Drivers Vista cooldrives (http://www.cooldrives.com/wividrforprc.html) did the trick! I have no idea of the lineage of this package, but they worked. And they worked when those on the supplied CD didn't; When those on the site Web of the card does not, and when those prolific site does not.

  Thank you

  Tom

• drivers for USB to serial port cable

  I am trying to install drivers for a USB cable to serial port on a HP Pavilion dv7 laptop (Windows 7) - I go through the download and when I plug the cable of the toolbar displays a sequence of installation but then an error of installation failed. I tried all sorts of updates and Windows says that it cannot verify the signature of the device.

  Would have been nice to know exactly what you had already tried :-)

  I do not know what adapter you are using, but I have a Trendnet TU-S9 that I use to connect my OBDII code reader to my PC, so I can save the CEL errors that I receive on different vehicles. I thought I had the drivers for it installed, but I have not (could not even find on a HARD drive). But I plugged it in just to see what happened. The message was that no local driver could be found, I wanted to try Windows Update? I said yes, and installed a "Prolific USB - to - Serial Comm Port (COM3)". Plugged the code reader, started the PC-Link software and here!, everything was good.

  You could try to uninstall anything that you have already installed, restart, then connect the adapter and see if you have the same success. I use Win7 HP x 86, but Vista should at least try to do the same thing, and who knows, it might work :-)

  SC Tom

• Said device USB to serial port Manager works, but it is not

  Original title: PL2303 USB to Serial No. GB
  My laptop is running Windows 7. I loaded the drivers PL2303. The Manager of said devices usb-serial comm port works. Set at 9600 baud, 8 No 1 order no flow.
  The GPS is a Garmin etrex Euro software version 2.06. GPS version model 156 206.
  I communicate successfully with the GPS unit via an DB9pin port at the back of my office. 9600 8 No 1 Garmin format.
  When I added the USB cable series to communicate via a usb port the "EasyGPS'program cannot read the GPS.

  I down loaded the PL2303 drivers for my desktop (XP) and the same problem occurs.

  I get the message ' device working properly "for both laptop and desktop."
  There is however no communication to the GPS.
  I tried again via the DB9pin port and communication are OK.

  Any Suggestions
  Thanks, Jim

  Hello

  I suggest you to join easygps helpdesk on this issue.
  www.EasyGPS.com/support.asp

• PL-2303 USB-TO-SERIAL CABLE DRIVER FOR VISTA CANNOT INSTALL__

  INSTALLATION A SAY SUCCEEDED, BUT TYPICAL YELLOW MARK WAS STILL THERE. NEWS SAID DRIVER CAN NOT INSTALL DRIVER BECAUSE THE NAME IS ALREADY USE A SERVICE OR A NAME SERVICE DISPLAY NAME.

  Hi Rlina,

  Please check the following link about a similar problem and fix possible:

  http://h30434.www3.HP.com/T5/other-notebook-PC-questions/need-driver-for-PL-2303-USB-to-serial-port-adapter-for-HP-G6000/m-p/20798

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to: get USB drivers Serial Adapter for Windows7

  Please where can I get USB drivers Serial Adapter for Windows7.

  I was using this adapter under Windows XP normally. But it does not work with Windows7, even if I installed the software on the CD that came with the adapter.

  Kind regards!

  Arthur

  It is the responsibility of the manufacturer/peripherals to create drivers for their products for operating systems, the manufacturer wants their products to work with. Therefore, it is suggested that you contact the support site of the device manufacturer to obtain the latest drivers for Windows 7, if they are available.

  Kind regards

• How to get usb to serial ubs working on win7 / / 32-bit

  Where/how to get usb to serial ubs working on win7 / / 32-bit

  can not find the drivers for Gigaware / Radioshack but works ok w / drivers on a 64 bit machine?

  Hello

  When the hardware is installed in, or attached to a computer doesn't work properly, it is often because of a driver problem. Hardware and devices require drivers work correctly with a computer

  1. what exactly happens when you try to connect?

  2. you get any error message?

  I suggest to follow the steps provided and we update on the State of the question.

  Method 1: Try to run the hardware troubleshooter and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I also suggest you to return the item and try to run the troubleshooter.

  Tips for solving common driver problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  See also: automatically get recommended drivers and updates for your hardware.

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Method 3: you can also select the appropriate model and then try to install the drivers from here:

  http://www.RadioShack.com/UC/index.jsp?page=software

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• USB to serial port, Com port to use.

  I have Windows 7 64 bit Ultimate, evga 58 MB Intel i7 950 3.06 GHz, 6 GB ram, many locations for usb. I have a weather station "Oregon Scientific WMR968, I plugged my XP PC via a"usb to serial"cable, it worked well, giving me a com port to use for the software, but it does not work with Windows 7. It installs an input usb device, under the label HID, but not a COM port I have tried many drivers, but she finished in the same way, "peripheral usb entry" NOT a COM port I have tried to install .inf and who does not work either. I tried to update driver, and then point to the .inf and still no good. How to do this job, please. ?
  Frustrated,
  Robert

  Hi Androman,

  First of all I suggest you to check if the Oregon Scientific WMR968 is compatible with windows 7 or not.

  Check out the link given below to the windows Compatibility Center 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  If it is not compatible with Windows 7, then install the drivers in XP sp2 compatibility mode and also to contact the manufacturer for drivers that are updated that are compatible with windows 7.

  Select the option for windows XP sp2 and install the drivers.

  For more information, visit the link given below:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Windows 8 does not support the prolific usb to serial driver

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Understand when the manufacturer of the hardware device will provide you with the drivers for the hardware you want to use on the operating system you want to use.  If they aren't - so there you go.