USB transfer cable does not recognize the photo LCD

Similar Questions

• sync iTunes does not recognize the photo library

  Hello

  I've been messing around with my photo library, and now when I try to sync my iPad, iTunes does not see my photo library.  The Photos app connects to the library, which is located in the folder images for the user account, no problem.  But when I connect the iPad to the iMac and iTunes opens, if I click on the header of Photos on my iPad, sync Photos box is unchecked, and when selected, the option copy photos pictures, looks as the pictures in the folder is empty, when in fact the photo library is located here.  She received no related some how?  I had my library on an external drive and passed to the user account on the internal disk without problem.

  Thank you!

  It is surprising how a simple search does not turn the answer to such a question, which one would think would be quite a common problem.  Indeed, several people asked similar questions, but often with no response.  However, I managed to find the solution on manual site Apple of all places.  And in the interest of the public service will post it here.  The problem is even if I had taken my photo library with the preferences window, I had not designated 'Library system' as in below.

  

  Once the user has clicked on 'Use as system library', then iTunes could see the library.

• Portege R100 video cable does not reach the replacement LCD screen

  Hi guys, I have replaced the LCD screen of my Toshiba R100, than they had in it was defective. It seemed that it was a replacement at some point however. In any case, I received my new screen, but does not reach the video cable to the top of the circuit of LCD screens. How am I meant to connect it to the screen? Is there an extension cable or what? The screen they had in there previously looked like they were welded copper wires about 8 digitizer.

  Here are 2 pictures of what I mean

  

  

  Hello

  Where did you buy this screen?
  Are you sure that it is perfectly compatible with your laptop protected R100 to 100%?

  Looks like it s not fully compatible
  However, if an extra cable is necessary you can get it from the Toshiba ASP in your country.

  In your case, I recommend you contact the guy and ask for compatible cable!

  Welcome them

• Photosmart 6520 does not recognize the photo paper HP to 4 of 6

  I canoe print smaller than A4 - what is ridiculous - photos is not a very smart printer. I have the paper in the appropriate tray and it won't go so why the printer tells me there is no paper there? I tried tp print my photos of holidays for weeks, but it takes too much ink to do it to A4

  This seems to be the solution that I rarely need A4 photos. Thank you very much.

• With OS El Capitan, Lightroom does not recognize the photos on my iPhone

  With OS El Capitan, why Lightroom cannot recognize photos on my iPhone?

  I think the problem is that my iPhone had to function iCloud. Once I turned it off, the images were able to be seen.

  Who is?

  PJT

  Sent from my iPhone

• OfficeJet J4680 does not recognize the password wireless

  Hello!

  Our wireless printer is grateful is no longer the password wireless. It will print if connected via FireWire/USB and it does not recognize the network, but he thinks that the password is wrong. There is no Ethernet port, so I can't connect it to the modem or the router to see if it would work like this. I restarted the modem, the router and the printer, but nothing seems to work. The password is correct. What can I do else?

  Sharron

  Nevermind - I went stupid but now solved the problem.

• Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

  I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

  If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

  Lightroom Journal | Tips and advice straight from the Lightroom team.

• DreamColor LP2480zx does not recognize the USB for calibration

  Hello

  I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is like this:

  Reference Dell 690 running 64 bit + Windows XP

  DreamColor LP2480zx

  Apple Cinema Display 23 "

  I bought the DreamColor used, and in all other respects, it seems to work very well.  The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration.  I installed the last APS (version 2.0) and updated to the latest firmware.  These updates produces no change in recognition USB problem.

  The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.

  I had trouble with this problem for a few days.  I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution.  If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.

  Thanks for any help

  Clay

  An update to my previous post, I realized a work around for this problem.

  Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems.  I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system.  HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.

  My solution was this: I had connect the monitor to a regular running XP 32 bit system.  After I did, I could re - calibrate the monitor without the problem of USB connection.  This isn't a very good solution because not everyone has access to several machines, running different operating systems.  But it's a work around, and it worked for me.

  Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.

  Clay

  PS- I posted this as resolved, only because I was able to calibrate my monitor.  It's not really solved the problem, but it gets the monitor working again.  Maybe HP will address this problem in the future, but I'm not holding my breath.

• Aspire One d255 does not recognize the usb connected external ssd drive

  I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

  I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

• Lite-On ENAU108 CD Burner IT does not recognize the USB key

  Windows Media Player does not recognize the USB drive letter

  Although the Windows Device Manager recognizes it.

  I want to add drive from the device to WMP

  Hello

  1. have you made any hardware changes or software on the computer before this problem?

  2 - is the USB key in Windows Explorer?

  3. you try to transfer music files from the USB key?

  4. what version of Windows Media Player do you use?

  If you use Windows Media Player 11 & try to add media files in Windows Media Player, you can follow these steps.

  a. open the Windows Media Player, click on organize > manage libraries > music.

  b. click Add and navigate to the location where the file is stored in the Windows Explorer.

  
  Reference: Add items to the Windows Media Player library

  Hope the helps of information.
  Please post back and we do know.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "

  I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?

  My laptop is a Qosmio F60

  This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
  According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.

  Some other HDD is recognized correctly?
  What you can try is to reinstall the chipset driver, restart the laptop and test it again.

  Since when you have this problem? Some installed updates of the last days?

• Satellite A200-1AE does not recognize the USB 2.0 flash drive

  I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
  The same USB works without problem on other computers with vista!

  Someone knows what to do?

  Hello

  First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
  After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

  Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

  Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

  Best regards

• EA6700 does not recognize the 32 GB usb 3.0 flash drive

  My EA6700 does not recognize the drive flash usb 3.0 32 GB (Silicon Power J10)
  tested with the two NTFS FAT32 & does not work
  WD 1 TB USB 3.0 œuvres
  PQI 8 GB Usb 2.0 works

  pls help

  I just use "BOOTICE v1.0.6 by Pauly" and in "Manage items", "Re-partitioning" changed "Disk Mode" mode "USB - FDD" mode "USB-HDD (single Partition).

  Now it works fine