Use and standby battery Iphone6s time
A few days ago, I got a replacement from apple (iPhone6s) phone and drains battery much faster compared to my previous iPhone6s. So I went to check the use of the battery and the day before, the usuage and Eve has the time (1 to 2 minutes of different sometimes). Is this a problem? All my friends who have the same phone as me doesn't work not I have this problem. Their sleep are usually much longer and their phones have a life better battery.
Hi there Anson_,
It seems that the software on your phone is not properly read the queue time and use. I would start by quitting the application settings on your phone:
1. press the Home button twice quickly. You will see small glimpses of your applications recently used.
2. slide to the left to find the application you want to close.
3. push upward on the overview of the application to close.
When you have done that reboot the device and test again the question:
iOS: switch off and on (restart) and reset
If the problem persists, save your device in iTunes, then restore it like new and verify that it works.
How to clear your iOS device and then set up as a new device or restore from backups
If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself. Who should get the info to update properly, please use the Apple Support communities.
Tags: iPhone
Similar Questions
-
with respect to its use and the issue of time to watch on the iphone 6 s
Hi, I'm a bit confused about the use and timing standy on 6 s 16 gb iphone. so my request is as follows: -.
1.) after charging my iphone 6 s, 100%, I use it non-stop Messaging on whats app, Yearbook, online, twitter, without interruption. However, I don't watch the videos on you tube. Also my opinion, all location-based services are turned on. so in this case when I use it non-stop, the battery is going for almost 8 hours. so, it is normal that the battery to last for 8-9 hours when the phone is used non-stop.
Thank you...
prospects for an immediate response
PAL Mickey
Hello
It seems ok to make battery last another 2/3 hours go into settings
Disable Apps refresh also Bluetooth so do not use.
See you soon
Brian
-
Windows 7 and the battery error "consider replacing your battery".
In Windows 7, I received an error message saying "Consider replacing your battery" "there is a problem with your battery, so your computer might suddenly turns off". Any Solution for this
Hello
The battery may actually need to be replaced.
-----------------------------------------------------
References to Vista also apply to Windows 7.
Check with support from the manufacturer of their books online and the drivers and their forums system
(as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
problems.=================================================================
Other information that might help:
Control Panel control - plan change Options - power plans - power - advanced settings
Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
long to load).In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
systems overload are not a problem.Here are some tips to help and troubleshoot battery issues.
Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
them and be careful). Batteries are old, or it could be a problem with the computer.
Check with the support of the machine system, and many of them have on line forums.New Lithium-Ion type battery usually last longer if you do not unload their less than 30%
However on a laptop that not extend their life a lot. Best is to use the a/c adapter
When this is possible.I use the free version of BatteryBar to monitor my battery. Click on the green button on the
Yellow box on the right side of the page to download the latest stable version.BatteryBar - free version available
http://osirisdevelopment.com/BatteryBar/index.htmlAnother good program
Vista battery saver - free
http://www.codeplex.com/vistabatteryProblems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsYou can also check with the manufacturer of system and forums that many use their own
proprietary software to monitor the battery and they could be known problems with your battery.============================================================
Battery meter: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questionsBattery saver
http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-powerSolutions to common battery problems
http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problemsWhat is the precise the battery meter?
http://Windows.Microsoft.com/en-us/Windows7/how-accurate-is-the-battery-meter============================================================
Try this - to make a Restore Point
How to create a System Restore Point in Windows 7
http://www.SevenForums.com/tutorials/697-system-restore-point-create.htmlHow to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.htmlThen Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
Update the drivers (which can do nothing) - then do a right click and UNINSTALL each - RESTART
who will update the driver stacks.Problems with the lives of its use and the battery of power - Mr Fixit
http://support.Microsoft.com/GP/windows_battery_power_settingsI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
3 day old iPhone 6s more iOS 9.2 warm the back of the phone and quick battery use.
Hello
3 days ago, I bought a 6 s more than 64 GB iPhone.
As I used the phone (by taking a few photos, browse the facebook/instagram), I noticed that my iPhone was very warm (could feel the heat through my rubber as case) and the battery had dropped by at least 30%. I contacted Apple support yesterday after the upgrade to iOS 9.2.The support person said restore your phone to factory settings. I restored the phone installed my important apps and only took a few photos. The same problem happened. The phone was hot and the battery kept exhaust I used resources very not applications. I have always erase the multitasking apps and turn off the phone regularly. All the solutions for my problem? Thank you!
Try again the phone back to the factory settings, this time without the help of the backup data. Manually configure personal information, do not install 3rd party applications. Then test the phone. If the phone works normally, use the backup again. In case the problem comes back, contained backup of corrupted data, the cause of your questions, and you will have to start all over again without any data backup.
If the phone still heats after setting back to factory settings and do not use the backup, this problem is hardware driven and the phone must be repaired by Apple.
Use iTunes to restore your device to factory settings - Support Apple iOS
-
While using my phone and the battery goes down sometimes while it is on the charger
While using my phone and the battery goes down sometimes while it is on the charger
What charger do you use? Which shouldn't happen with the Apple adapter, but it might with adapters that cannot provide informed that the phone needs.
-
Questions about the use of the battery and power on the Satellite L30-134
Hi all!
I have again L30-134. The questions are:
-May this work of his power without battery installed on the computer?
-a this model to charge the battery in time to work on machine plagged to supply AC circuit?
Kind regards
Andrew.Hello
-As you know, if the battery is faulty you can always use your laptop with AC power only. Answer is: YES.
-Here, I agree with explanation s chain. The battery will be recharged but slower. -
My mcbook used to synchronize my iphone6 it again to get the new version on computer and I have the new version of iTunes versionThis (11.4) is the current version.
iTunes version 12.3.2 is the latest version of iTunes.
-
Hello I have a macbook pro 2011 and in a few days I had my swelling of the battery and after that I ordered a new and only for a day, it uses my new battery began to swell again, what could be the problem? Help me, I am a student that I can't do it by new
is it because of power problems?
Take it back to the Apple Store and ask them to check it out. It should be under warranty. Bring the MBP along too. It sounds like there might be a problem with it.
-
After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.
Please test after taking each of the steps that you have already tried:
Step 1
Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.
Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select
▹ System Preferences... ▹ Sharing
Disable all sharing services.
Step 2
If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.
Step 3
Select
▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off
Step 4
Select
▹ System Preferences... ▹ ▹ Advanced Bluetooth...
and uncheck the two boxes marked
Open Bluetooth Setup Assistant at startup if...
Step 5
Step 6
Back up all data.
Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:
/var/vm
In the Finder, select
Go ▹ go to the folder...
from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.
A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.
Restart the computer and empty the trash.
-
Use an encoder to establish and sampling in discrete time
I can't really control what DAQmx subs to use and how to configure. It should be a simple task, but not for a beginner like me. WARNING: I spent hours reading the help files, knowledge base articles and research forum and there is nothing in them that makes sense to me. Details of the operation are in the diag of block. Please take a look and see if you can guide me. THX.
BTW... Using panels of MAX test I checked the wiring, operation and configuration of my sensors. With the attached vi, pgm does not signal departure but initiated each time the first 'A' pulse arrives. This checked because the encoder can measure data without ever passing the pulse "Z".
Thanks Mike. I got this example and it is one that I had already downloaded. It does not work. After the start pulse, it reads all the samples in the sample clock frequency, not on the edges of the reference trigger pulses. The example is wrong. So I did what I normally use in these cases... wandering banging my head against the wall until something gives.
Solution. Set the example of wiring in the source of reference trigger control in the source of the input clock as well as in the relaxation of reference under vi (this thread already exists). He now works as it is supposed to. Hard learning of examples when the examples are wrong. Here is the solution where all els tries to emulate this example.
-
original title: Hello!
Hey, I have a question. When I try to open a chanel online seems to me the message: Microsoft Visual C++ Run time library error made in Google Chrome and to view a chanel in line that I use and IE toolbar. I'm waiting for a response. Thank you!
Hello
1. is this problem only occurs in Internet Explorer?
2 may I know which version of IE are you using?Method 1:
If the problem occurs on Internet Explorer, try the link below.
http://support.Microsoft.com/kb/822521Method 2 If on Chrome, I suggest you get contact with Chrome Forums.
http://www.Google.com/support/forum/p/chromeHope this information helps you.
-
Can I install ADOBE CC programs in both mobile and desktop? Although I'm sure that we can use only one at a time
Yes, I have it on my iMac and MacBook Pro.
-
Please explain these things in real time, how we will use and how it will effect
Hi all
Please explain these things in real time, how we will use and how it will effect
Types of validation:
- Depending on
- Independent
- None
- Pair
- Special
- Table
types of lists?
Types of lists are:
- List of values
- Long list of values
- List of POPs
This help-
Select a Validation Type for your entire value (user, administrator system and using Flexfields)
-
I recorded annual plan and you paid every month since November 2015. But because of the pregnancy, I can't use adobe more at this time. Can I Cancel to pay after next month, or are there other ways? Please let me know.
Hello
Please refer to cancel your Adobe Creative Cloud membership
If you need to contact support technical assistance
Concerning
-
I had Adobe Cloud (all applications) to 32.98 USD more than two years now, I have wanted to renew but new contract price is $79.98 - I only use Dreamweaver maybe three times a year, maybe pro adobe acrobat 4 times per year and photoshop maybe 2 times. Is there a plan months I can go that is close to the $32 per month?
Hi Justin,
The full price creative Cloud for individuals is $49.99 / month.
If you add the broth, it's when you pay $79.98 / month.
Please visit:-Creative Cloud price and membership plans | Adobe Creative Cloud
For support:-contact us | Adobe
Maybe you are looking for
-
Satellite L670-1EE does not start after upgrading RAM 4 GB to 8 GB
I'm trying to upgrade the RAM from 4 GB to 8 GB. If I replace two 2 GB of 2 modules of 4 GB modules, the BIOS (which is the most recent) realize the 8 GB, but does not start at startup. There is just the white cursor blinking not. When I put in the 1
-
System to disable the 59628700 key. Please help me
I don't remember my password for the life of me. Please help me! Disable the system key 59628700
-
Need manual for Satellite A40-702
Hi all My daughter received a SA40 702. The problem is that this is the worst bit of wear, missing keys from the keyboard, DVD drive problems. These are not insurmountable. The main problem is that the manual has been lost. Someone has a link to a ve
-
HOW CAN I REMOVE KNCRT FROM THE COMPUTER
NOT ABLE TO KNCRT TO STOP RUNNING TO REMOVE PROGRAMS
-
I bought this computer Dell 2 years and never used or opened until last month. When purchased, the computer was supposed to come w/Word and Excel INSTALLED? I can't locate. After that purchase of times I also buy Outlook - which I received a disk for