Use external monitor with Tecra A9 problem
Hi all
I have laptop Tecra A9 with Intel 965 Express Chipset and Windows XP Professional. I use 6.14.10.4814 graphics driver
I tried to implement the configuration to use the external monitor as extended desktop.
My laptop screen is 1680 x 1050 and external monitor is 1280 x 1024 and I want to configure it to be as follows:
the two screens to work in their native resolutons
monitor 1 is portable and it's on the right side, external is 2 and it's on the left
And it works fine until I put in Hibernate or restart. After this external monitor is 1 and it is on the left and laptop screen is 2 and it's on the right.
In addition, laptop screen resolution is 800 x 600 now and all the desktop icons are messy.
I'd appreciate any help with this.
Thank you.
Hello
Maybe you should try a page Intel graphics card driver?
I m not quote sure which version is the most recent but all of the details you will find on the Intel page.
By the way; First remove the old graphics driver before you install the most recent update!
Tags: Toshiba
Similar Questions
-
Cannot use external monitor with my Tecra A9
Hi all
Need help on this:
I connected to an external monitor to my Tecra A9 but the monitor shows me blue color.
I tested other monitors and reset the graphics card to the default settings but the same stills.Can you give me some advice on how to find out the solution for this?
I really need the external monitor to work because I need to edit some screens of the application.Thanks for your attention!
PagoHave you tried to use the option of FN + F5 to switch to the external display?
If this does not help I recommend to check the settings in the properties of the graphics card-> advanced settings. -
Radio Frequency Interference on external monitor with Tecra M10
I have a Tecra M10 that seems to emit RFI, causing lines of interference on the external VGA monitor and audible interference on its speakers.
I was worried that this might be a hard drive in trouble, but before the call to support, decided to continue the investigation.First I tried unplugging all USB devices; the intervention was still there, so I tried to unplug the PC from the Express Port Replicator.
As I moved forward, the noise has been reduced, and this led me to check the power supply.
The unit is a 5 amp unit, PA3378-3AC3, and that seems to be the source of the DDR.Port replicator came with a spare unit 5 amp, PA2521E-2AC3, but there is too little noise from it.
So I checked the two supplies with and without the duplicator.
Noise each time.Suggestions - is something wrong or it is to be expected with the Tecra M10 RFI?
Hello
Have you checked if the same question would be displayed using the laptop with the own plugged AC adapter.
Someone had very similar problem and it was a problem to the ground using a power cable 3 pins for different could solve this problem.But of course the question could be also related to the monitor cable external doggy.
The user in this thread has this issue.
The replacement of the power cable supplied with the monitor helped.It s worth a try check it out...
-
Equium A100-147: can I use external monitor with 1920 x 1200 output
Hello
I have an equium A100-147, anyone know if its possible to use my external lcd as office extended to its native resolution of 1920 x 1200, I want to use it for photo editing.
None of these options to external display currently on the graphics card drivers provide a decent game with the external monitor.
How can I make it fit on the screen without stretch or compress images with a decent resolution?
Hi Mae
As you probably know the resolution you want to use depends on the installed graphics driver.
If the graph does not contain the 1920 x 1200 resolution you will not be able to use it.But maybe after a small modification of the graphics driver you will be able to choose such an external resolution.
Please visit this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677Maybe the procedure described by Jogi might help.
-
can I use external monitor with my laptop, but the laptop screen is broken can it work
my screen is broken I can see pieces of the screen, but not enough to change things so can system work I connect always external monitor at the moment until the repair is possible thanks steve
Hello Stephen,
Assuming that you have the right cable, Yes, you can. In all likelihood, you will need a cable to VGA 15 pins to connect your monitor to your laptop. With a bit of luck, your laptop should recognize your external monitor and shunt video to it.
If it's not, or you need to change whatever it is, go to control panel, Manager of devices and open this applet. You may need to check both places. The first is graphics cards - your video card, which is part of the integrated graphics card likely your motherboard. The second is monitors, who will be where your external monitor is displayed. Your duty to make sure what your video (graphics card) points to the external monitor (monitors).
If you have any questions, please post them here. Let me know how you fare.
Kind regards
BearPup
-
Tecra S4: cannot switch automatically to an external monitor with APR 3 +.
Hello
I used a Tecra S4 (with Windows XP Prof.) with monitor 3 + and with an external 19 "Advanced Port Replicator. If I connect my laptop with the Port Replicator, it will automatically switch to the external display. I have to use the function "FN" to move."
I signed up the external monitor with "use this device as the primary monitor.
I don't have this problem with my other laptop Toshiba Tecra A3.Now, I think the problem is the geforce graphics card.
Does anyone have the same problem?
Thanks for the help and sorry for my bad English; (o)Hello
It works with Tecra S4, too.
Install new Modules of Commopn
http://support.toshiba-tro.de/Tedd-files2/0/CMOD-en-20071119111948.zipInstall the latest Toshiba laptop Extensions
http://support.toshiba-tro.de/tools/Tecra/TS4/XP/TME/TME-TS4-XP-38400xp-en.zipInstall the display device change Utility
http://support.toshiba-tro.de/tools/Tecra/TS4/XP/DPL-change-drv/dspdevchge-TS4-XP-2500-en.zipEnter in Control Panel, start Extension mobile controls.
Go to the tab 'Change of display device' and activate the Service.Now, it should work.
-
using the iMac 27 inch mid 2011 as an external monitor with a PC via mini DisplayPort
I find conflicting information via web search to be able to use my iMac 27 inches, mid-2011 as an external monitor with a PC. Is it possible to use the iMac as an external display via the Display Mode target between Thunderbolt port of the iMac with a PC equipped with a mini DisplayPort?
Of course, I hear it's possible with the appropriate cable. But if it is not possible, I would like to know for sure.
Thanks in advance for your help with this. _henry
Target display mode is Mac to Mac only. Use your iMac as a display with the target - Apple Support Display Mode
-
How to use two external monitors with my laptop?
I have a new Pavilion dm4-301 d cl Entertainment PC. My OS is Windows 7. I'm used to using two external monitors with a docking station. This new laptop lacks a docking station. What should I do use two external monitors?
Certainly not without a dock, but even with laptop HP well enough docks limit you to one of the ports on the external monitor, even if there are two on the dock. We used a device called an Atlona AT-HDPIX2 which is a USB to hdmi adapter. It provides a feature of third monitor for a laptop... use the native external port of the screen and the computer screen internal, then this device gives a third control that is fully configurable to display Windows 7 interface... clone, extend, etc.. It allows a full HD resolution and is pretty responsive for games even light. HP does not have any true docking station for your laptop.
-
Qosmio X 500 - 13R: picture on external monitor with resolution 2560 x 1440 is blurred
Hi all
I have a computer laptop X 500 - 13R Toshiba Qosmio, although 2 years, still a great piece of hardware.
I just bought a new monitor 27 "U2713HM which supports a resolution of 2560 x 1440.
Computer video card notebook (GTX 460 m) supports a resolution higher than through a digital connection, so I used a HDMI cable to connect.
Via Control Panel Nvidia, I could create a custom resolution, but the image is not clear / is blurred.
It is readable, but it's just not everything.Tried with HDMI 1.4, without success.
I volunteered to connect through Dual Link DVI cable, but the phone doesn't have a DVI connector, and I doubt the adapter will help.Anyone has a suggestion how to fix this problem?
Thank you.
I would like to share my experience using an external monitor with a HDMI cable.
My monitor supports both HDMI and DVI port.
First of all, I plugged my laptop on the external monitor using a HDMI cable to HDMI.
But the fonts and the picture was not clear. I used the resolution 1920 x 1080Then I went to the DVI port. I plugged the laptop s HDMI port to monitor s port DVI (HDMI/DVI cable) and that solved my problem.
I'm not quite sure the relevance of m this could be for you, but it worth the try
-
laptop connected to an external monitor with vga cable issues?
1The votefavoriteI use a Sony Vaio e series laptop running windows 7 Home premium 64-bit, which I always connect to an external monitor with a VGA cable.
I put graphics options to display only on the external monitor and I would like to close the lid of the laptop. In the power settings I put it do nothing when the lid closes.
When it is connected to the external screen I am able to look at the screen very well if the lid of the laptop is open. But whenever I close the lid, the display on the external monitor is turned off.
I have tried everything I can think of as the use of a keyboard to toggle the display, change the plan to plug the monitor off before and after and even more, to much to list etc.
I actually did it on my HD TV using a Hdmi cable that allows me to close the lid. But I want to use it only on my monitor that is sadly only VGA.
I know I'm not alone here, I found many forums on the same issue, but nobody seems to have an answer. It is always with the help of a VGA cable when I find others with the same problem.
Does anyone know where a response?
It seems either VGA may be quite old now since the introduction of HDMI, that Microsoft has not bothered to look on this or get out an update to resolve this issue. Sorry it's just very frustrating because cannot find an answer, and I don't like the laptop overheating or wasting money on energy.
(1) right click on your power Option icon on the taskbar
(2) will take you to Options below
Control Panel:
Choose what closing the lid"this choice is the 3rd in your list of choices
The next screen will allow you to configure your choice:
When I close the lid:
On battery: do nothing and
Plugged in: Do nothing
This will prevent your system/video to go to sleep or stopping
Hope this helps
-
I currently use 3 monitors with my calendar on my central monitor. When I move my mouse to another monitor, it follows on the timeline (scroll left and right, depending on how I move my mouse). This happens randomly and reboots do not seem to solve the problem. Any ideas? Y at - it a shortcut that I'm missing?
Hi all
Please check this thread: Re: strange behavior of automatic scrolling in editing
Thank you
Regalo
-
Use multiple monitors with Client view
Hello
Quick question regarding the use of multiple monitors when connecting via the customer to view. I have many users using a monitor with a zero multi configuration client and everything works as expected. When connecting via customer discovered however the Office extends on (i.e. Outlook stretches on left and right screens) two monitors instead of 'renewal' (i.e. the prospects on the left monitor, acrobat opens on the right). Everyone is aware of a fix for this?
Thanks in advance.
See you soon.
Are you sure that you are using PCoIP? View what version do you use? Which version of the Client that you are using a view?
Gunnar
-
Satellite L555-10R: Question about using an external monitor with 1920 x 1200
Hello
I have this toshiba laptop: L555-10R
I want to buy a screen external 24 "to use for CAD
Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?
I really want the 1200 vertical height of the external display for CAD work such as size of the screen vertically made a big difference.
If not, is there anything I can do about it to update the graphics card from the laptop?
If not, can you suggest a new laptop that would support this? I am looking for excellent performance for rendering using 3DS Max, autocad, sketchup, etc.
Thanks in advance
Christopher> Please can you tell me, my graphics card composed with run at 1920 x 1200 monitor, and a second screen 1600 x 900 at the same time see my cell phone?
I think that this should not be a big problem
The graphics chip is expected to provide support for 1920 x 1200.
The question is whether the graphics card driver contains such special resolution of 1920 x 1200However, you can certainly choose two different resolutions for the screen internal and external monitor.
-
Cannot use external monitor as primary monitor with Portege M400
I'm unable to use the extended feature deasktop with my m400. I installed the latest video drivers. When I go to the driver intel graphics media accelerator under display properties and choose extended Office I can't use my external monitor as the primary monitor.
The same thing on my satellite.
I m not able to activate the device primary option on the external monitor.
Of course, I m able to use the extended desktop and other options of the external monitor option but the parameters of the primary device for external monitor are gray.So I think that it of not possible to do something like that. As mentioned above, it could be a technical limitation.
-
Use the external monitor with a laptop HP DM4
original title: connectivity
I have a job offer from a national firm, for working from home, customer service. one condition is that I have at least one monitor 17 inch, my computer screen hp dm4 laptop is smaller than that, so I could connect my laptop to my TV and still meet the technical specifications?
Hello
Check with HP Support, their drivers and documentation online and ask in their forums
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=========
HP DM4 has a VGA and HDMI port, so you can use a those for connecting an external monitor.
So you can use a 17, 19, 21/22, 24 any size you want. And use cell phones and external monitors
in a double configuration which is what I use here.HP - DM4 Specs
http://www.shopping.HP.com/webapp/series/category/notebooks/dm4t_series/3/computer_storeHow to set up dual monitors in Windows 7
http://www.online-tech-tips.com/Windows-7/How-to-Setup-dual-monitors-in-Windows-7/Two screens are better than one
http://www.Microsoft.com/athome/organization/twomonitors.aspxWork and play better with multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitorsMove windows between multiple monitors
http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitorsTutorial: How to set up two monitors (Windows) - video
http://www.YouTube.com/watch?v=YFCpaAs5s3cHow to set up multiple monitors
http://www.PCWorld.com/article/157672/how_to_set_up_multiple_monitors.htmlI hope this helps.
Rob Brown - 21/04/2012 Mariners vs Chicago - Phil Humber pitched a perfect game!
Maybe you are looking for
-
The worm the most recent Firefox and the last Ad-Blocker worm cause Facebook to display incorrectly. Facebook displays only the right when Ad-Blocker is disabled. How this can be fixed or how do I go back to Firefox ver 5. ??
-
I bought a song to download from Wal - Mart.com and received the error message when I tried to download the song. "Firefox doesn't know how to open this address, because the Protocol (wmms) is not associated with any program." I've never had a proble
-
Smart printing button HP/Bing does not
I just downloaded the HP/Bing smart print button & it does nothing when I click on it. I have, click on the activate button & followed the instructions, but when he was told to select an option, the only option he had to take off, so I didn't check a
-
We lost our cd can microsoft provide us with one and olny license key, we have.
We introduced a new server windows 2008 ROK our maintainer of the server for a year now. Finally, we lost our CD none should conclude, but the license key is the thing can be seen. Microsoft may provide us with another Server 2008 ROK to which our ke
-
Copy several files to the command prompt
I want to create a batch file copy several files that I specified a directory and use a command once. but when I tried to 'copy file1 + file2 + file3 destDir', it copies only the first file. I do not copy all of the files or the files whose names sha