Use FaceTime minutes or data?

Similar Questions

• screen saver turns on when using FaceTime

  Since the update to MAC OS Sierra, I noticed that my screensaver activates when using FaceTime - most annoying because I have to quickly move the mouse to put it all again.

  He didn't get it until I've updated from El capitan, so I guess it's something to do with MacOS Sierra.

  He's not doing it with Youtube but I'm still trying with Skype.

  Screen saver works as it should do it with an ordinary application (for example, safari, etc.) Pages) if I don't move the mouse or keyboard for the specified time (five minutes).

  I do not have hot set of corners, the display is set on turn off (energy prefs is system) after 10 minutes. Screen saver is five minutes of inactivity.

  I have an iMac 27 "retina, first generation (a little less than two years) with i5 and 16 gig memory, standard graphics M290X.

  I missed easy adjustment here?

  I have it, feel also my parents as well.

• with an average of 5 minutes of data - is no way

  I need average 5 minutes worth of data, save this average and then again on the next 5 minutes of data, with an average of this data block.  I tried to use the average function pt-pt in LabVIEW, but who seems to take an average continuous market, I do not want.  I probably read data once every 0.1 seconds, so I can not used stacked registers at offset, because it would be not very economical. I thought to build a table, but I don't know how to remove all the data at a time on average to it in an efficient manner, and more I'm stuck on the concept of re - create the table/clear the Board after five minutes of data has been collected, averaged and recorded.

  Does anyone have a suggestion?  I would really appreciate any advice or suggestions on how to go about it.

  Keep a running total in a shift register.  When your 5 minutes have expired, divide the sum by the number of samples taken, the sum to zero and start over.

• How to use FaceTime with Siri

  I you would Siri have been able to dial phone numbers using FaceTime, so my question is, is it possible? And if so, how?

  Hey MichaelnAvallone,

  Thank you for reaching out to help through Apple Support communities. Looks like you are wanting to make calls FaceTime with Siri. If so, I'd be happy to explain how to make this happen. First, you'll want to press on and hold the Home button or say "Hey Siri" to activate Siri. Then, for example, you can simply say, "make an audio call FaceTime to MOM" and Siri will only start a FaceTime call audio. If you say 'FaceTime Mom' Siri will begin a FaceTime call with video of this contact.

  The link below shows the ways to learn how to use Siri.

  Use Siri on your iPhone, iPad or iPod touch

  Kind regards.

• Using Facetime and iMessage with multiple phone numbers

  I often travel internationally. When abroad, I get a local SIM card and so a local phone number. The problem is, anyone trying to send messages to my becomes phone number inside a bounced message until I go home. I am looking for a solution to this problem. What I want to do logically is to pass all my iMessage and Facetime messages to my phone number internal to any international phone number that I have the chance to have for the week or two, I'm out of the country, without actually transferring phone calls for the international number.

  How can I accomplish this?

  If during the passage of an international SIM inside, if I use a different AppleID to save the number, can I add the domestic AppleID to iMessage and Facetime and have forward SMS messages to internal phone to my phone number - actually give my 2 phone numbers for text and using Facetime?

  What happens if I have a second iPhone (say one IS minimal) think I swap my SIM home - then I have two iPhones, one with an international SIM card and the other with an internal SIM card - then - I associate the two phones with the same AppleID (as if I had the same AppleID on an iPhone and iPAD) and make it work? In other words, a text Message sent to my iPhone internal SIM also towards my international SIM iPhone? This I must have my internal iPhone with me, or I can leave home and have it still work?

  Any suggestions for other ways to solve this problem?

  Thank you!

  HU

  You should always be available for the Apple ID that is associated with a phone number at one point.

  SMS is out of scope for this, because it is a function of carrier managed by your carrier at that time and linked to your SIM card.

  You put a new SIM card in your phone, FaceTime and Messages should register again your Apple ID for/with this new phone number shortly after. I do not think it deal only with the functions of automatic reference to FaceTime or Messages, because they are themselves a transfer function.

  To the Apple server... "go get my friend with the Apple ID of [email protected]." Server Apple think and said: "OK, it uses the 888-555-1212 phone number right now, so I'll send your application there.

  Ring, ring... you download a FaceTime application.

• I live in a town where Comcast caps using 300 GB/month data. To watch a movie that I bought it through my AppleTV, it downloads to the AppleTV device before playing, or it flow (therefore using data)?

  Question about the use of Apple TV2. I live in a city where Comcast caps using 300 GB/month data, more of exhaust us sequences of movies and tv via a new Apple TV2 (64 GB) and our application of Samsung Smart TV. I just bought my first movie via iTunes and have a question about how / where it is stored / games. When I look on my AppleTV2, downloading movies on the AppleTV device before playing or he broadcast from the cloud similar to renting (and therefore use data)? Can it store movies AppleTV2 I bought, or what I need to download them to my computer? I read that HD movies don't play well through HomeShare or iPlay, but perhaps beyond the news. Thanks for the help.

  Use the same amount of data streaming and download.

  The only difference would be if you want to watch the movie several times. In this case, download the movie first, would be more effective in terms of use of the data.

• How to use FaceTime audio abroad without being paid usage time?

  How to use FaceTime audio abroad without being paid usage time?

  Connect via wifi

• Using Facetime on iPad, but you have an Android phone

  I searched the forums from near and far and cannot find an answer to this... Sorry if it's a common and I'm bad looking.

  I have used to have an iPhone, but had to switch to an Android.  However I still have my iPad (Wifi + laptop) which I would still like to be able to Facetime with my family.  When you migrate from iPhone to Android phone I had to turn off iMessage and Facetime on my iPhone and my iPad so that I can separate my number with iMessage and continue to use texting on my Android.

  Even though I have an Android phone, can I still use Facetime on my iPad?  Turning on Facetime again my settings will mess with my ability to send SMS messages?  I only ask because I thought that it was strange that I had to turn off Facetime as part of the process to separate my Apple number.

  Thank you.

  Yes, you can still use FaceTime on your iPad. You will be activate FaceTime with your Apple ID, not a mobile phone number. There should be no impact on your ability to text with your Android phone.

• Can Equium A100 - I use E drive for data backup?

  My Equium A100-27 has a 80 GB hard drive, it is split in the C drive half and drive E.

  I understand that the E drive is used for system recovery purposes, but can I also use it to store data?

  If I use it for how much room must be left free for system data recovery?

  It's old laptop model, and there is no recovery of data stored on the second partition of HARD drive.
  If you can do what you want with this partition, and also use it for backup of data or backup data.

• My internet crashes when using FaceTime, as I downloaded iOS 9.2. Can anyone help please

  Since the ios9.2 download my internet crashes each time I have use FaceTime on iPad and iPhone. Can someone help me with this or I have to pay for technical support from Apple. Thank you very much

  Same thing here. FaceTime works fine on my iPhone but it crashes every time on my iPad. I continued to see updates of difficulty cellular stability, kept hoping Apple should fix this but it's getting downright tedious!

  Difficulty this Apple!

• What pins to use to receive the data from the PDS ELITE RS485 with the PXI-8431/2?

  Hello!

  I use the PXI-8431/2 to read data from the flow meter PDS ELITE (Modbus RTU). Receiving data, the RS485 protocol request to terminals 4 and 5, but this configuration does not seem to work. When I connect the RS-485 converter USB of Microflex I get the data correctly, so somehow between the PIN lay and PXI this problem there.

  Can someone help me?

  See you soon,.

  Steven

  Hello Steven,

  I think that what was Hossein trying to send you is the following:

  How to connect and configure a device with RS-485 2-wire

  Can you also tell me a little more what you use to read the data? What environment. You have 2-wire or 4-wire Modbus RTU?

  Kind regards

• How can I use notifications to send data from different sources for the same chart?

  Hello

  I use the model of 'Continuous measurement and logging' project comes with LV 2013.

  It is extremenly helpful in understanding the messaging between the acquisition, graphic and loops of newspaper. (Thank you NEITHER!)

  I ran into a snag though.

  I want to change so that my graphic loop receives notifications of data from two sources of acquisition by the declarant.

  I have trouble getting the data from the two sources to display on one graph.

  I've isolated the problem in the attached vi.

  Here's what happens:

  1. I create 2 parallel loops data and send the data to a third parallel loop with the notifiers.

  2. the third loop receives data from one of the loops because one of the authors of just receiving notifications is to expire instead of receive data.

  Can anyone suggest how can I fix?

  Thank you.

  -Matt

  Here's my modification of your VI. I put notes on the block diagram to explain the changes. He uses a queue for data transfer to avoid data loss. It uses a notifier to stop loops. All local variables and value property nodes have been eliminated.

  The way loops are arrested probably let some data in the queue. No more of one or two iterations of each of the loops of data acquisition. If you need ensure that all data has been displayed (or recorded in a real application), then you must stop acquiring loop first and read the queue until you know it's empty and both other loops stopped. Then stop the render loop and release the queue and the notifier.

  Lynn

• What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Hi all

  I am new to TestStand. Still in the learning process.

  What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?

  Thanks in advance,

  LaVIEWan

  I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question

• Conversion: Can I use Corel WordPefrect 8 data with Windows Vista files?

  Can I use data files Corel WordPefrect 8 with Windows Vista?

  On Friday, June 11, 2010 17:03:40 + 0000, grandmadfs wrote:
   
  > Can I use Corel WordPefrect 8 data with Windows Vista files?
   
   
   
  The issue here is not one of which version of Windows you are using.
  It is one of what you have installed applications.
   
  The answer is Yes, if you have WordPerfect (or some compatible)
  program) installed on Windows Vista. The answer is no, if you do not.
   
   
  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
   

  Ken Blake

• Error (21,100): PL/SQL: ORA-00997: illegal use of the LONG data type

  CREATE or REPLACE (name in varchar2) procedure Compress_tab_partition
  is
  last_mnth_var varchar2 (8);
  curr_mnth_var varchar2 (8);
  number of last_mnth;
  number of curr_mnth;
  last_partition varchar2 (8);
  high_val varchar2 (4000);
  Start

  Select to_char (add_months (trunc (sysdate, 'MM'),-1), 'YYYYMM') | ' 00' in the double last_mnth_var;
  Select to_char (sysdate, 'YYYY') | TO_CHAR (sysdate, 'mm') | ' 00' in the double curr_mnth_var;
  Select to_number (last_mnth_var) in the double last_mnth;
  Select to_number (curr_mnth_var) in the double curr_mnth;

  Dbms_output.put_line ('Compression of GOLDMGR Table scores.' | table-name |) "to go". ») ;
  Dbms_output.put_line(' ');

  / * Step 1 - identify the name of the partition of the specified table must be compressed * /.
  Select high_value from high_val from user_tab_partitions where table_name = table-name;
  Select nom_partition into last_partition from user_tab_partitions where table_name = table-name and high_value = rtrim (high_val);

  / * Step 2 - Alter partition table to compress * /.

  run immediately "ALTER TABLE GOLDMGR." | table_name | ' CHANGE THE PARTITION '. last_partition | "COMPRESS by low query";

  / * Step 3 - Index rebuild step * /.

  I'm in (select index_name in user_indexes where table_name = table-name)
  loop
  run immediately "ALTER INDEX GOLDMGR." | i.index_name |' REBUILD ";
  end loop;

  Dbms_output.put_line (' COMPLETED: compress the Table partitions change.) ") ;

  end;
  /

  I'm getting an error like: Error (21,100): PL/SQL: ORA-00997: illegal use of the LONG data type

  Please resolve.

  HIGH_VALUE datatype is LONG. You may not use for a long TIME in WHERE clause expressions. You need to loop through the partitions by selecting HIGH_VALUE and then comparing. Secondly, there is no need to select double to calculate expressions. For example:

  Select to_char (add_months (trunc (sysdate, 'MM'),-1), 'YYYYMM') | ' 00' in the double last_mnth_var;

  should be replaced by

  last_mnth_var: = to_char (add_months (trunc (sysdate, 'MM'),-1), 'YYYYMM') | ' 00'.

  and there is no need to add_months here:

  last_mnth_var: = to_char (trunc (sysdate, 'MM') - 1, "YYYYMM"). ' 00'.

  But the main question is simply ALTER TABLE MODIFY PARTITION COMPRESS allows compression but does not compress. You must issue ALTER TABLE MOVE PARTITION COMPRESS:

  SQL > create table tbl (n) partition by range (n)
  2 (partition p1 values less than (maxvalue))
  3. Select lpad('X',4000,'X') from dual connect by level<=>
  4.

  Table created.

  SQL > select bytes
  2 from WHERE user_segments
  3 where nom_segment = 'TBL '.
  4 and nom_partition = 'P1 '.
  5.

  BYTES
  ----------
  830472192

  SQL > alter table tbl
  2. change the partition p1 compress
  3.

  Modified table.

  SQL > select bytes
  2 from WHERE user_segments
  3 where nom_segment = 'TBL '.
  4 and nom_partition = 'P1 '.
  5.

  BYTES
  ----------
  830472192

  SQL > alter table tbl
  2. move the partition p1 compress
  3.

  Modified table.

  SQL > select bytes
  2 from WHERE user_segments
  3 where nom_segment = 'TBL '.
  4 and nom_partition = 'P1 '.
  5.

  BYTES
  ----------
  8388608

  SQL >

  SY.