Use Firefox on computer at home for years. Now gettting the message 'unable to connect '. No new software added. Explorer works very well. Help, please!

Similar Questions

• I can not turn Adobe Photoshop C52 to my new computer requires activation code. Do not buy a new program, because it works very well.

  I can not turn Adobe Photoshop C52 to my new computer requires activation code. Do not buy a new program, because it works very well.

  Bo CS2 cannot be enabled now whether on the PC or Mac platform. The activation servers are turned off, for any new installation on any platform requires the special version

  Terri

• I have the UI which downloads the file in file multiprt transfer in chuncks. It worked very well in a previous version of firefox, but now ajax calls gets abandoned?

  I have the UI which downloads the file in file multiprt transfer in chuncks (blob file). It worked very well in a previous version of firefox when we send chuncks 10 MB for each ajax calls. But now in the last version of firefox, its get rejected for 10Mo chuncks with every call, but allowing only 4 KB be sent for each call. You guys could help me. I also tried with the Application (/ octectstream). It also works very well in all browsers.

  Hi Sivasathy, support.mozilla.org is intended for management of the end user. If you have questions about web development please refer to the place to go for support the developers instead. Thank you for your understanding!

• Information sharing: for some reason any Mozilla is unable to connect with Chase Bank. Users of Mozilla need help!

  I wanted to just make sure that Mozilla went in there was a problem using Firefox to connect with Chase Bank. I was able to complete my activities, but I had to use MS IE to do. Is this something be done to correct this situation?

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

• Comparison sites. When using clicks to visit the third-party pages, Firefox 4 does not and displays "1x1.gif" tab? Was not a problem in previous versions. I use Windows 7. Explorer works very well.

  Happening often on click advertising. Too many sites to the top, but today it happened on thisismoney.com. Choose a comparison of credit cards, then click on apply. Pages won't load and giff of 1 x 1 appears in the tab? Don't not like unrolling of the top of the box to the right any mouse move creates alamost a strobe effect of options!

  Some firewalls like Kaspersky can block content and send a GIF 1 x 1 instead.
  
  Kaspersky: Protection > firewall > Filtration System: disable the banner "Ad Blocker".

  See:

  • Configuration of Kaspersky Internet Security
  • Configure the firewall so that Firefox can access the Internet

• My Ipad mini will not connect with my wifi at home.  Other devices are able to connect with wifi.  I repeatedly entered the wifi password, but this is not ACCEP it.  Worked very well.  I turned the mini ipad market and nothing.  Help!

  My Ipad mini will not connect with my wifi at home.  Other devices are connecting with the wifi at home.  I turned the mini ipad market a few times and nothing. He recognizes wifi but when I touch the password, it continues to request the password.  Help!  It was working fine earlier in the day.

  What has happened with your iPad since earlier today, when it worked? updated App or iOS? nothing at all

  If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

• I'm unable to complete a download process. pop download - up appears and it seems to be downloading, but several tabs pop up and the point I'm trying to download does not show the end upward. my download using internet explore works very well

  The tab section keeps adding several tabs that I select something to download. It ends up a loop and keeps appearing as if it is the downloading of multiple copies of the same thing and I can't even get to a point where it allows me to stop the download or the closing of firefox

  See Firefox opens several times empty tabs or windows after clicking on a link

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  Original title: Windows Fax and Scan

  What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?

  A piece of hardware called a Fax Modem, installed in or connected to your computer with the appropriate device drivers from the manufacturer of the device, you have installed in or connected to your computer.    And a telephone line.

• I need to download windows xp service pack 2 on a computer professional home for a single computer.

  I need to download windows xp service pack 2 on a computer professional home for a single computer.

  I am the administrator please help thanks vicki.

  Links to a downloadable version of all Service Pack for Windows XP updates can be found here:

  "How to obtain the latest Service Pack for XP"
    <>http://support.Microsoft.com/kb/322389 >

  Ignore any verbiage that says "for the professionals' because that's exactly what you're looking for.  They put that when service packs have been made public to cut down on bandwidth for everyone both this download.

  HTH,
  JW

• Firefox does not display my photo site properly, or play music from it on my new computer. I have 2 other PC and it works very well on those.

  Just set up a new PC and downloaded Firefox. It will not display correctly my Zenfolio Photo site or it will play music that accompanies the slideshow on the home page. I have 2 other PC and it works very well on them. All are Windows 7 Home Premium.

  Yes. He uses Flash to show the images and music. Go to tools-> Add-ons and check the Plugins. Make sure that Shockwave Flash 16.0.0.305 is not set to never turn on. I keep me always activate.

  If you do not see flash, can get Adobe Flash here: https://www.adobe.com/products/flashplayer/distribution3.html and the EEG for the Plugin-based browsers.

  If flash is installed, then it sounds like something is blocking.

• How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can?

  Switch issues. Help, please.

  How is it that a computer which works very well with a direct Ethernet connection won't work with a switch, however any other computer using the same port, cable, ect, and so on, can? We already checked the firewall as a question, that it was not, and now, we are puzzled.

  Well, I know that the issue is long-term... believe me, it's a long, but as they say, the devil is in the details. Anywho, the question is, my grandfather has a HP laptop, which for two years has been able to run through a Linksys switch to his router and connect its printers to his laptop. About two months ago it suddenly doesn't work like that. Now, it works fine if it plugs directly into the router/Ethernet. My uncle suggested that the switch was bad, but after testing the same port, cable and all, the switch worked well for him. ' GRAMPS really needs this answered, but someone else, it is called can not understand and now I, in turn, ask you all for what you can offer. Here are the ideas that we have already discredited.

  -Switch bad: as above, is that this particular laptop, even under identical conditions, the works of my uncle very well.
  -Bad NIC: debunked through the fact we connected to the computer directly to the router and it worked fine.
  -Bad configuration of the firewall: we have disabled the firewall (please do not notice, he wasn't the smartest idea, we already know) and even if she recorded the switch exists, the internet is always triggered when you are connected with the switch.

  Thanks in advance for any assistance that you can provide and Merry Christmas to you all.

  It would be useful to consult the results of the ipconfig/all command both when it is connected to the switch and when it is connected directly to the router.  In addition, what is the model of the switch?

  To save the manual copy and the new hits of the ipconfig/all command output-

  First connect through switch.
  Open a command prompt window (start > run > cmd > OK)
  Type the following lines in the black command prompt window and press ENTER after each line

  echo "Connected via the button" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".

  Now connect directly to the router, type the following lines in the command prompt window and press ENTER after each line

  echo "Connected to the router" > "% UserProfile%\Desktop\ipinfo.txt".
  ipconfig/all > "% UserProfile%\Desktop\ipinfo.txt".
  Notepad '% UserProfile%\Desktop\ipinfo.txt '.
  output

  Copy the contents of the Notepad window in your response (if you use the laptop when it is connected directly to the router) or close the Notepad window, and then copy ipinfo.txt of the laptop to the Gramps in a USB FlashDrive you can connect to any computer allows you to answer.

  You can delete ipinfo.txt on the desktop when you are finished.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.

  I upgraded my 64 new image computer windows 7 Home premium Edition to windows 7 using the upgrade anytime professionoal.  I downloaded the fix for quad core to use virtual pc and windows xp mode.  When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.  I service request # 1182160056 but the phone lines of microsoft do not work.  Any suggestions?

  Have its possible that this is a download corrupted Windows XP mode, you tried to download it again and see if it works? Also, make sure that you first install Windows Virtual PC.

  Click Start, type: enable or disable windows features

  Press enter on your keyboard

  Scroll down and make sure that Windows Virtual PC is checked.

  Click OK

  Restart if prompted.

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/