Use Loader() to display the image in the Simulator?

Similar Questions

• App is load/absent in the Simulator

  I am new to Blackberry programming and that you have just installed the JDE version 6 with the 9700 Simulator. I tried to launch the sample helloworld application and it present or run in the Simulator. Even if I load the application on the file menu, nothing. The Simulator launches as planned and I can navigate through the menus. If I stop the app in the JDE with stop sign, a window entitled "C:\NoSuchFile.java" and it is said in the source code file is not available. Any ideas?

  It has been marked as active. I went with the Eclipse/RIM plug on the way and it works fine, then we can close this question, as far as I'm concerned.

• After installing Windows 7 using MDT, Windows displays the message "Windows Update cannot currently check for updates because the service is not running.

  Hi all

  I worked on creating a better system for my business get an OS up-to-date with all the required software, settings, and drivers. I have previously using WDS as autonomous and just syspreping images and pushing them up until he became incoherent and corrupting of the parts of the image. I did a little surfing on the web and discovered that many computing professionals use MDT to produce images of quality with all the customization they need. So that's the problem.

  The image works fine. I'm able to customize the way in which I need to and get most of my successful deployed pilots (problem with trackpad drivers), but the error message I get when I try to run a windows update is "windows that update cannot currently check for updates because the service is not running." After I received this message I check my services and it shows the update of Windows running service and long-term as well running services. Tried to restart as suggested and still no results. Undertook research for a possible fix and still nothing.

  Any help?

  It became quite a headache for me. Thank you guys

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have problems with the installation of Windows Update.

  If you your computer are connected to a domain network?

  If Yes, then post your query in TechNet forums because they have more expertise in this issue to help you better. Please follow the below link to do the same.

  T echNet Forums for Windows 7 
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Using PowerCli to display the location of the folder vcentre

  Hello

  I adjusted began using the Cli power today. I managed to get some info on the internet but I am of course to have a problem with the script im its simple but at this stage I don't know enough about it.

  Basically I want thescript to output to a csv file with the name of the Virtual Machine, Datastore, host and his VCentre folder location.

  Everything is be filled except the get-file colum who im hoping will indicate the location of the folder VCentre

  Get - VM | Select Name, @{N = 'Cluster'; {E = {Get-Cluster - VM $_}}, '
  @{N = "ESX host"; {E = {Get-VMHost - VM $_}}, '
  @{N = "VICont"; {E = {Get-file - VM $_}}, '
  @{N = "Datastore"; {E = {Get-Datastore - VM $_}} | `
  Export-Csv - NoTypeInformation C:\VM_CLuster_Host_Datastore1.csv

  Thank you very much

  Ryan

  With recursion a bit, you can go a long way

  Get-VM | Select-Object -property Name,
  @{N="Cluster";E={$_.VMhost.Parent}}, @{N="ESX Host";E={$_.VMHost}}, @{N="VICont";E={
    $nodes = @()
    $obj = $_.ExtensionData  while ($obj.Parent){
      $obj = Get-View $obj.Parent    if("Datacenters","vm" -notcontains $obj.Name){
        $nodes += $obj.Name    }
    }
    [string]::Join('/',$nodes[($nodes.Count - 1)..0])}},@{N="Datastore";E={Get-Datastore -VM $_}} |
  Export-Csv -NoTypeInformation C:\VM_CLuster_Host_Datastore1.csv
  

• Using SQL to display the date range

  Gurus,
  
  I have a sql statement such as
  

  select MIN(HIREDATE), MAX(HIREDATE) FROM EMP WHERE DEPTNO = 30

  My output looks like
  

  MIN(HIREDATE)     MAX(HIREDATE)
  
  12/30/1998        12/30/2001

  Based on the values of MIN (HIREDATE), MAX (HIREDATE) values
  I need a SQL to generate the output as
  
  30/12/1998
  30/01/1999
  28/02/1999
  ---
  ---
  until the Max value (HIREDATE)
  
  In February, we have 30 days, in this case to the last day of the month.
  
  Thanks for the great help
  C 007

  Hello

  put my post to correct and others with useful, please

  Is salim.

• Firefox does not load and displays the message missing or inaccessible profile.

  An update of Firefox was interrupted before completion before that

  https://support.Mozilla.org/en-us/KB/Profile-Manager-create-and-remove-Firefox-profiles

  https://support.Mozilla.org/en-us/KB/how-run-Firefox-when-profile-missing-inaccessible

• Using flash to display an image in a mysql database

  How can I use flash to insert a picture into a mysql database?

  I have an android app, I do when someone post a photo and the image appears in a mysql database.

  This is how I do it: I make a php page where in the link you put like this: example.com/example.php?IMAGE= _ and he puts it in the mysql database. Only what should I put in the part _ which will make the image appear in the mysql database? In flash, I'm using getURL to go to the url above.

  How to make the image they take in my application appear in the part _ and the link in my mysql database?

  Again, you can just hit edit rather than 2 messages. People get emails every time you post. You me sprayed just in emails.

  If you can download with flash and your problem is next to Server related, try the appropriate forum like this has nothing to do with Flash. Maybe the Dreamweaver forum.

  Good luck

• I use LR 5.7 on my MacBookPro w retina and cannot display the images in the display of the grid - only at the same time. This will make export painful and long.

  5.7 LR on a MacBookPro w retina using can't display the grid to open the imported photos I revised and improved. Can you tell me how to open it in the grid view?  I tried it in the drop-down list so that clicking on the icon in the grid view, does not.   Have been using LR for two years and this has never happened before.

  The grid view is not available or is the size of the thumbnails view set grid too large so only fits on the screen?

• How to load and display Image

  Hello everyone.

  I type with very green fingers, so please excuse the question. Lessons learned from the examples, I tried to load and display an image in ActionScript. This is the original example that I work on:

  ...

  ...

  var bmd2:BitmapData = bmd.clone ();

  var infoBM:Bitmap = new Bitmap (bmd2);

  var back: MovieClip = new MovieClip();

  Back.Name = 'back ';

  back.rotationX = - 90;

  var bSurface:MovieClip = new MovieClip();

  bSurface.y = int (...

  bSurface.z = int (...

  bSurface.addChild (infoBM);

  var overlay: Sprite = new Sprite();

  overlay.graphics.beginFill (...);

  overlay.graphics.drawRect (0, 0, bSurface.width, bSurface.height);

  overlay.graphics.endFill ();

  bSurface.addChild (overlay);

  back.addChild (bSurface);

  var tf:TextField = new TextField();

  TF...

  TF...

  TF...

  bSurface.addChild (tf);

  ...

  ...

  I'm trying to place an image on the bSurface instead of the block of text, as described above. So far, I came with:

  var iSprite:Sprite = new Sprite();

  var iMatrix:Matrix new matrix());

  var bmData:BitmapData;

  bmData = new BitmapData (surface.width, surface.height, true, 123);

  var loader: Loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, onComplete);

  Loader.Load (new URLRequest("c:\pixlr.png"));)

  function onComplete (event: Event): void

  {

  bmData = Bitmap (content LoaderInfo (event.target)) .bitmapData;

  }

  iMatrix.tx = 0;

  iMatrix.ty = 0;

  iSprite.graphics.beginBitmapFill (bmData, iMatrix, false, true);

  iSprite.graphics.drawRect (0, 0, surface.width, surface.height);

  iSprite.graphics.endFill ();

  surface.addChild (iSprite);

  ... and:

  var bmData:BitmapData;

  bmData = new BitmapData (surface.width, surface.height, true, 123);

  var loader: Loader = new Loader();

  var location: URLRequest = new URLRequest ("c:\pixlr.png");

  Loader.Load (rental);

  bmData = Bitmap (loader.content) .bitmapData;

  surface.addChild (bmData);

  but without success. I've been fails miserably for days now and would appreciate help.

  Thanking you in advance,

  Sofia.

  what you trying to do?

  If you just try to load an image (pixlr.png), use a relative path and something like:

  var loader: Loader = new Loader();

  Loader.Load (new URLRequest ("pixlr.png"));  put the png in the same directory with your fla and published files.  You can move after getting this work simpler example

  addChild (loader);

• How do I programmatically load and show the façade of a vi but NOT run it?

  Is it possible to load and display the front panel of a vi but NOT run?  I start with the AsynchronousCallAndForget.vi from the example finder and inserted a node invoke with the Open FP method call before the starting node the asynchronous call. The vi that I'm loading has the "Run when opened" unchecked and the menu bar IS visible so I can manually click the run arrow. Thank you!

  

  Why do you use the asynchronous call? If you simply open the VI reference, then call the FP. Open method, it works very well. You can then call the VI run method which wait until is set to false if you want to execute asynchronously, it is how we did in ye olde days before we have this fangled tricks "Start Asynchronous Call.

• How to display the ToolTip for button

  Hello
  
  I use 11.1.1.4.
  
  I want to show the ToolTip in the button. tag that so I want to use and to display the ToolTip.
  
  Best regards, rami

  Rami,

  Use the property 'shortDesc"of the button.

  John

• DreamWeaver F1 to display the help file for Coldfusion

  Hello

  How to use F1 to display the help file for Coldfusion.

  I just installed an old copy of CS3 on my laptop, but I struggled in F1 to display the help of CF on a label CF.

  I downloaded and installed ColdFusion 9.01 atgs and Dreamweaver Help file.

  Should it be activated?

  Thank you

  or try SHIFT - F1, which will open the documentation of this tag in the Panel.

• Using quotation marks or not when referring to the names of the simulation button

  Hello!  My colleagues and I have different feelings on how the button names should be displayed in text boxes in a simulation.

  What is the best practice for this...?  If you have a text box that appears which says 'click on the OK Button.  What is the right way to show this?

  -Click the OK button (just to do OK in bold with without the quotes)

  -Click on the button 'OK' (put 'OK' by double quotes)

  -Click on the 'OK' button (the button 'OK' apostrophes)

  A colleague thinks you should use single quotes.  The other colleague said that it's incorrect gratically and we should use quotes or no quotes.

  In addition, always do you use "BOLD" to display the button name?

  Is there a standard on this?  Which way is the best way to go?  Any info or ideas would be greatly appreciated...

  Thank you so much and have a great day!

  Best regards

  Francesca

  Hello

  If you have a question that is in the domain of Technical Communication. I followed a lot of lists written Tech and see these all the time.

  The answer to this is a quote:

  The great thing about standards is that there are so many choices.

  In almost all the discussions that I've ever seen in this sense, there are usually only one result. And this result is usually the next. It is not really important. Just be consistent in how you apply it!

  Personally, my vote goes for the one who is not:

  Click OK

  At least that your username has no idea what a button is, they see clearly it's a button, no?

  I hope that others will chime in here with the best advice.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Two logos app installation to the Simulator

  I have a problem nagging, so that I can not find a cause. When I install my application on the simulator it displays the app twice, logo next to each other. The logo is mentioned once in blackberry - tablet.xml and nowhere else.

    convertLogo.png
  

  This could be the cause. Anyone know how I can fix this problem?

  (I should mention that when I power down the sim card and restart it there are often four or more icons each of them for an application.) They all work)

  Thank you!

  When I tried to set up FlashDevelop he did this. I used to install on the Simulator FruitBat. The first time I installed a simulator application there are two icons and when I installed it again it add a. When I tried to uninstall the single icon would leave. I never figure out what was causing it. I had to delete the virtual machine simulator and create a new one to get rid of all the icons. This isn't happen again since I when the use of Flash Builder.

• App-Manager does not connect to the Simulator OS Firefox on Windows 7

  OS: Windows 7

  Firefox: 28

  6.0pre8.20140112 Simulator 1.2 Firefox OS

  When I run the simulator it opens fine and I see a Firefox OS Desktop
  But the App Manager does not connect. The console at the bottom right says:

  .. localhost:56455 options (the port varies)

  .. connection timeout. Possible causes: has not clicked 'accept' (guest).

  .. .disconnecting

  .. .disconnected

  I have disabled my firewall, restarted firefox and even system - did not help
  There is a similar bug - but I don't know if we are talking about the same thing:
  https://support.Mozilla.org/en-us/questions/988385

  Thank you

  Well - I already knew these links and I can't find anything useful
  Anyway, I tried the Simulator instead of 1.2 1.3 (unstable)
  This one works very well