Use of adapter Memory Stick Duo in Satellite A200 (PSAE6)

I have a Satellite A200 (PSAE6).
My camera have a Memory Stick Pro Duo and I have an adapter.

But when I try to put the card into the memory, the same adapter card reader it go so deep that I can't remove it without assistance tools.

So I don't know if my work drive card?

What I've done wrong?

Please help me

Have you checked the manual for types of compatible card?

Perhaps the Memory Stick is supported, but not the series Duo.

Tags: Toshiba

Similar Questions

  • Satellite A200 - adapter memory stick duo work?

    Should this combination work?
    Portable satellite A200 - 14 d and on memory card reader memory stick duo 1 gb with memory stick duo adapter.

    Say the user manual?
    Have you checked it?

  • Satellite Pro P100-327: memory card reader does not read the Memory Stick Duo

    I just received a P100-327
    aShop http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=121991&Toshib = true)
    According to this page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick®, Memory Stick Pro, MultiMedia Card, xD-Picture Card)", but the pdf manual that comes with it says that it supports not the Memory Stick Duo, Memory Stick Pro Duo or mini-SD.

    However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter, and the reader can't read one of them (they both count as Memory Stick Pro, which should be readable, right?)

    Would I be able to read my Memory Stick Pro cards? Why I can't because it says that I should be able to? Should I install something first?

    Hello

    To my knowledge and according to the manual of bridge housing media supports media type
    -SD memory card
    -MultiMediaCard, xD-Picture Card
    -Memory Stick
    -Memory Stick Pro

    Please note that the Memory Stick and Memory Stick Pro are not the same in the Memory stick Duo and Memory Stick Pro Duo.
    Don t mix.

  • A Qosmio F10 read Memory Stick Duo Pro card does

    I have a memory stick duo pro 512 MB in an extension of memory card stick (case making it a full size memory stick)
    I can read the card on an external memory card adapter, but not as part of the internal drive?

    I think I have the latest drivers, but can be difficult to install in the right place, I can read the cards not pro using the same set up. How to read what the Pro cards on the internal card slot which driver should I I downloaded from the forum?

    Clues please!

    Hello

    I think that it of not possible to use the Memory Stick Duo Pro card in the internal drive.
    As far as I know, you can't use every SD card with the Toshiba unit.
    You should check the manual for this laptop. You will find information what SD cards are compatible and supported on this laptop.

    Good bye

  • Qosmio F30 - 141 Memory Stick DUO / card reader problem

    I have a problem with the Memory Stick Duo Adapter/Memory stick PRO DUO card.
    Computer does not recognize volume. Unit Memory Stick appear in the system, but when I click on it in the Solution Explorer, computer say "insert the disk in drive E". I have the original card Memory Stick PRO DUO 2 gb and MS Duo adapter. 30 sec computer try plug this card.

    Computer properly operate with the Memory Stick Pro 1 GB card and Memory Stick M2 card 1 Gb with adapter M2.
    all this work cards in my Photo and on another computer.
    I am trying to connect this card to Sandisk 6 in 1 adapter PCMCIA, but in this case, no one card works.
    This device appear in IDE ATA/ATAPI controllers like '___Memory_Card_Adapter_II', but the driver for this device is not installed (KODe 28).

    Thanks for the wonderful world of the internet for this info:
    F30-141 does not support memory stick pro duo and adapters has not been tested.
    I'm afraid that also use adapters of doesn't help.

    I bought an external card reader. It s a small device and was very cheap and the best is that this external card reader takes in charge most of the maps ;)

  • Multi-card reader don't like to give back the cards Memory Stick Duo Pro 23 Pavilion all-in-one

    I want to just make sure I don't do something wrong.

    When I plug it into a SD card seats when inserted about 2/3 of the way into the slot and I can easily put my fingers on it to remove it when it's time to take it out.  When I plug the Memory Stick Duo Pro that is not recognized until it is at least inserted 9/10 and I can push completely rinse with a case and am not sure that it has bottomed out or not.  It works fine, but now it is not removable without the use of pliers tweezers.

    Is this normal behavior and waited for the mult card reader integrated into 23 all-in-one Pavilion?

    I have a more than adequate solution.  I plugged in the little USB card reader that accepts MS Pro Duo in their own homes. This post is therefore more closely to ensure that I'm not missing something obvious.

    My guess is that the drive or the motherboard was designed for the case to be a little closer it is.

    Hello @MarksPavilion,

    I understand that you have problems, remove the Memory Stick Duo Pro card reader that he will not jump out far enough to catch. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

    I want to thank you for display on the HP Forums. Have a great day!

  • DSC - h3, and memory stick duo

    my daughter gave me his camera which was almost never used... so it is almost brand new, but it's obsolete. It is not a memory stick duo with her, and they are not available in the store. is the memory stick duo pro compatible? If this is not the case, I can use? No matter what?

    Yes, you can use a Memory Stick Pro Duo with capacity of up to 32 GB. More information on compatible Memory Sticks for the camera can be found in this link.

    If my post answered your question, please mark it as "accept as a Solution.

  • Satellite A200-PSAE6E: I want to use Windows 7 - what drivers should I use?

    I have a Toshiba Satellite A200 PSAE6E, and now I want to use Windows 7.
    Only, I have a question, if the drivers are supported and what BIOS I need to use

    Hello

    Windows 7 is not official on the market. Only the RC (Beta) version is available.
    This means that there is no driver specific to the Win 7 OS.

    But as you know the Vista is very similar to Win 7 and it is why some drivers (not all) should work and work with Win 7.

    Just test and check what can be used and what doesn t work with Win 7

    Maybe you could post some summary finall...

  • Vista Ultimate on Satellite A200 PSAE6 - FN buttons do not work

    FN + F1, F2 keys do not work for me computer laptop Satellite A200 (PSAE6), installed Windows Vista Ultimate... F 12.

    I downloaded driver Package of added value, but support for the combinations given did not appear.
    Write the reference where it is possible to download the driver. The version of bios is installed later.

    It is desirable, that there are Russian support.
    Thank you.

    Hello

    All available, drivers, tools and utilities can be used with every version of Vista. What is important that all these things must be installed in the order of good facilities. Here, the order of the facilities.

    Windows Vista
    Intel Crestline Chipset utility
    Robson Packege (Intel iMSM Driver)
    Intel Crestline GM driver
    nVidia Display Driver
    Realtek ALC268 Audio driver
    Realtek 8101E 10/100 / Driver LAN Gigabit 8111
    Synaptics Touch Pad Driver (with LuxPad) V9.1.19.0
    ALPS Touch Pad Driver V7.0.301.4
    TI Multiple Digital Media Card Reader V2.0.0.7
    TOSHIBA software modem
    Driver Intel LAN wireless Golan/Kedron
    Wireless LAN driver
    Camera V1.7.130.0330
    Bluetooth Stack for Windows by Toshiba V5.10.06T
    Bluetooth Monitor V3.01 (Build 20070215)
    Enbeded IR V0.0.0.6C
    TOSHIBA Value Added Package V1.0.17
    TOSHIBA Flash Cards Support Utility V1.48.0.3C
    TOSHIBA Hardware Setup Utility V1.48.0.9C
    TOSHIBA Supervisor Password Utility V1.48.0.8C
    TOSHIBA SD Memory utilities V1.8.1.1
    TOSHIBA Fingerprint Utility V5.6.0.3284
    TOSHIBA ConfigFree V7.00.27
    TOSHIBA Assist V2.00.03
    And so on if something is missing from this list.

    See Russian Toshiba page for Russian support.

  • Re: What is the normal temperature on Satellite A200 psae6?

    What is the normal temperature on Satellite A200 psae6?

    What temperature do you mean exactly?
    CPU, GPU?

    Notes; the temperature depends on the heat dissipation of the unique pieces such as the CPU and GPU.
    The heat dissipation is higher when this part would go with superior performance.
    So it depends on the use of the laptop how temperature would increase

  • Satellite A200 (PSAE6) - RAM on Windows 7 32 bit upgrade

    I have a Satellite A200 (PSAE6) and I wanted to put more 2 GB of RAM, but tell me the Windows 7 Ultimate 32 recognizes only 1 GB means a total of 3 GB.

    Is this true?

    Hello

    Usually the OS 32-bit Windows recognizes ONLY 3.2 GB of RAM due to the limitation of the 32 bit OS.
    Therefore, you cannot use 4 GB of RAM with Windows OS 32-bit (Win XP, Vista, Win 7).

    But the upgrade to 4 GB RAM also depends on the chipset and BIOS.
    If both parties (BIOS and chipset) are not 4 GB RAM capable then you would not be able to use 4 GB of RAM, even using the 64 bit OS.

    Welcome them

  • Satellite A200-PSAE6E - FN key not working not not on Vista 32-bit

    Hi all

    I can't get the FN button to work, no matter how many times I reinstall the software of Toshiba, it doesn't seem to work!

    Anyone got a workaround?

    I use 2.40 BIOS and Vista 32 bit

    Hello

    By using the Vista operating system on laptop Satellite A200, the FN keys are controlled by Vista Flashcard Utility.
    This tool is a part of the added value Vista package and therefore this package needs to be reinstalled on your system!

    But before you start with the installation of VAP, the VAP installed older must be removed first.

    Check it out

  • Satellite A200 PSAE6E: unknown devices after installing XP

    I have a Satellite A200 PSAE6E and it came with Vista.
    Now I downgraded to XP my self and installed all the drivers I could find on the toshiba site
    I still have these problems:

    1. I have a pci memory controller which is not identiyfied by windows and I want to solve that

    2. when I connect my video camera pit 4 pin firewire to my laptop not found and when I do it by USB ieee1394, I get the usb device not recognized (trieed download of drivers for the cam, but they do not work)

    Please help me :)

    thnx

    Hello

    Regarding the point * 1: *.
    The "PCI memory controller" or "Mass Storage Controller means the former Turbo Memory module Robson." This feature is only available on Vista, and that's why drivers are not available for Win XP.

    Check this box:
    [No driver Windows XP for PCI memory controller | http://aps2.toshiba-tro.de/kb0/TSB83023N0000R01.htm]

    (* 2) * I put t know how it works with your camera, but I need to first install the cam drivers then I connected the camera to the laptop with a FireWire / USB 2.0 and then I turned on the video camera.
    My A200 she recognized immediately.

  • Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

    Hello...

    Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

    The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

    ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
    Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

    First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

    Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

    Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

    Windows tells me that it was impossible to find a driver in the any of the archives...

    The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

    Any help would be greatly appreciated,
    Tasos

    P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

    P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

    This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

    Hello

    Regarding the sound issue.
    A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

    You will need to install KB888111 and KB835221 hotfix

    With regard to the BIOS;
    Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

    Good bye

  • Help to find the driver on the Satellite A200 (PSAE6) HARD disk controller

    Greetings. This text has been written through a translation program, to try to understand :)

    Problem:
    My friend bought a few days back to herself TOSHIBA Satellite A200 (PSAE6) where it has been established operating system Windows Vista Home. He asked me to change OS on Windows XP Pro. With the first problem I have consulted - have deleted Vista, but to set up XP is not possible due to the absence of the HARD disk controller driver in the OS distribution kit. Windows Installer cannot find the HARD drive. I read that it is necessary to load the driver during Setup, press the F6 key. But a problem I can't find the driver in that.

    We have no disk with drivers that should go with a computer and therefore it is necessary to search independently on the Internet. On the Toshiba site to locate the pilot, it was not possible. Then I came to the Intel site and download "RAID/AHCI - Intel® Matrix Storage Manager» After unpacking I got only «infinst_autol.exe» archive

    Question:
    Where can I download this driver (not a "EXE" format) that can be used during the installation of Windows XP?
    PS: a chipset - Intel PM965 Express

    Thank you

    Here:
    http://support.toshiba-tro.de/Tedd-files2/0/stormng-20070827133046.zip

    use the files in the folder "ICH8M_32bit".

    Zingy

Maybe you are looking for