Use of custom in Veristand files

Similar Questions

• I want to use the custom pattern, actions ets... But I can not find custom files to [presets > model] or [presets > actions]... Where should you put these files?

  I want to use the custom pattern, actions ets... But I can not find custom files to [presets > model] or [presets > actions]... Where do I put these files?

  If you're on a PC - C:\Users\ [username] \AppData\Roaming\Adobe\Adobe Photoshop CC 2015\Presets

• customer will not use the correct tnsnames.ora file

  Hello all, I installed oracle 10g client on my machine... but here's the thing... I tnsnames.ora several file on my machine (which I can't delete or play with)... and because of this oracle is not able to connect to the database I want it to connect to... I can't do tnsping to the database... is there a way where I can point my client to use a specific tnsnames.ora file? as a pointer? or something where it will look in this file specific tnsnsame.ora?

  You can specify what tnsnames.ora for use the TNS_ADMIN environment variable
  Switch to the directory that contains your tnsnames.ora to use.

  Kind regards
  Uwe

  http://uhesse.WordPress.com

• One of your filters uses a custom header that contains an invalid character.

  When I send an email, you receive the following error message:

  «One of your filters uses a custom header that contains an invalid character, such as ':', a nonprintable character, a non-ascii character or an 8-bit ascii character.» Please change the msgFilterRules.dat file, which contains your filters to remove characters not valid in your custom headers".

  It is followed by a message saying that the email was sent and saved despite the error.

  The problem occurred after the transfer to 10 Windows (from Win 7)

  I deleted all files msgFilterRules.dat and all filters, but the message persists.

  Any suggestions on what else to try?

  Thank you
  Ben

  Problem solved.

  After you delete all files/imap mail entries, the problem disappeared.

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• Use a custom in a signal qml class

  I want to use a custom in a signal qml class, but have difficulties of implementation that correctly.

  My class is OutgoingInputs

  I give the floor

  qRegisterMetaType("OutgoingInputs");
  

  Save a pointer to it as a type of meta, which seems to be necessary, but when I also use

  Q_DECLARE_METATYPE(OutgoingInputs*)
  

  in the header file for the class, I get a compilation error.

  I have to save it without a pointer (was the idea here ) or is there another obvious error?

  Is there an example how to do this?

  I can receive the signal if my housing uses no parameters.

  I don't think you need to register as a metatype... a simple registry should do as it is the same as the use of the QML object:

  qmlRegisterType("mynamespace" 1.0, "OutgoingInputs");

  found this on the forums of qt:

  http://Qt-project.org/forums/viewthread/9657

  I hope that helps!

• Use a custom in a map icon

  I created a custom font, which consists of 15 simple icons. Each icon is mapped to a unique position. For example, type "A" produced the first icon, typing a 'B' produced the second icon, etc. The police is an OpenType font, and it works fine in all my office applications. I would like to use this font on a map.

  I downloaded the files of OTF provided this font custom that another police OTF (km) text content & Layouts > fonts.

  I have a card that contains 2 fields of text box: Description and title. Description use my custom font, and the title used by the police of km.

  In collections that are mapped to this card, I have an 'A', 'B' or 'C' in the Description field, and my title of the current collection in the field. So I expect that there would be an icon appears on the first line of the card, followed by the title of the collection displayed in km on the second line.

  But the police of the icon does not display the icon. It shows only a capital A, B or C. The title of the map by using the font of km appears correctly.

  Isn't this possible? I'd wait the police icon to work properly, since the system has no way of knowing that the 'A' looks different than a usual A, B looks different from a and B, etc.

  Also, I tried this visualization as my Preflight custom app that my application development custom iOS and Android.

  I got this to work, but 2 things I learned, in case anyone has the same problem:

  1. the police I used was a police custom that I created that had only a single character (a capital ' A') that I created for the test. Until I filled the police with the characters A to Z and a to z, the police gave a strange error message when you try to use the font in a card.

  2 as Nathan said, you must rebuild the application after adding a font. I had forgotten that.

  FWIW, I used the excellent "Indyfont" script for InDesign to quickly create an OpenType font containing the 15 special icon characters we need. Has no time at all to create the font. See Indiscripts: already

• I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  I downloaded just standard CS6 for windows and that you do not have an .exe for the installation file. I have a 7z file and an application file that I used to extract the 7z files. I am now at a fixed support.

  Hello

  You must download the file [.7z] 1 and 2 [.exe] file. Once downloaded, keep both files in the same folder.

  Then run the .exe file and it will extract the CS6 Installer for you. With which you can install your software CS6.

  For CS6 direct download link: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also check this link: https://helpx.adobe.com/creative-suite/kb/cs6-install-instructions.html

  In the case of additional assistance, feel free to contact support by calling/chat for cancellation requests and billing queries:

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  I hope it helps.

  P.S. If you use the adobe forums, please check useful/correct responses of staff or assistance, if there is.

  Concerning

  Ludo has

• Error message: the preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the original preset, as

  Hi all

  I can't open a project PP without this error message that appears:

  "The preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the preset original, exit the application without saving the project, reinstall all third-party components that are needed, and reopen the project'.»

  What I had been doing before that to happen was a PP project using sequences ProRes for editing and editing multicamera. Several cameras didn't work very well and after a few attempts of difficulty that I gave up and finished the work of cutting 3 layers of video instead. SOUL refused to make the finished three lasting more than 1 hr sequences so rendered video sequences PP. finals

  I tried to remove the plists for SOUL, PP and QT repair disk permissions and restarted, but there was no improvement.

  Customer is satisfied for now, but will want to return on this work to a later date so decided to uninstall and reinstall SOUL and PP in the hope that the two would be willing to work properly when needed again. SOUL works very well in conjunction with another PP project, but now I can't open the PP project in question without the above error message appears.

  After searching on the net, it seems that the problem may be caused by ProRes but I could not find a definitive solution to the problem. Does anyone know either:

  1. How do I solve this problem?

  2. If I chose the "modified by using a custom sequence parameter", can I be sure that my footage will look the same, even if they do not use ProRes? The final format of the deliverable will be mp4 so as long as the overall appearance does not change so I can afford a change in the edit codec. It's just that with three sequences of more than an hour long, I don't want working days to be ruined.

  Other older PP projects of mine open and work properly.

  First CC 8.2.0 Pro

  Media encode CC 8.2.0.54

  10.10.2 OSX

  Any help would be greatly appreciated.

  Duncan.

  Web chat Adobe find a solution.

  Open the PP. project

  Export your project or the sequence in Final Cut Pro XML form.

  Set up a new project PP.

  Import Final Cut Pro XML file.

  This will take you to the top race.

  Since getting back to this publishing project, I found that some things will be lost or change using XML:

  You will lose the position key framing, black video clips, dissolve fx, audio levels, dynamic audio fx, the possibility to open a multi camera clip and change the display of the camera.

  You keep the cut points, crop fx.

  Not perfect but only took a few hours to save 3 working days.

• using metadata custom in an export dialog box?

  Hi all

  I'm currently mired in my first attmpt to create a plugin to export from Lr and, as expected, have hit a wall. As I came through the example of code that does what I'm trying to do, I wonder if anyone here can have some tips.

  The goal is to use metadata custom photos selected to fill an export service provider dialog box. This will be used to export to form paths for proper output, generate a manifest of text file (containing the data that will be used by an external workflow), and then copy the raw files properly is renowned for the output path.

  The custom metadata and the creation of export dialog box worked fine. I am struck by the problem is that I can't get the metadata of such out of the LrTask that I should call the photo: getPropertyForPlugin() from the inside. Inside the call function, data are there; recorder: trace () print it to the console. But what is the appropriate way to return the data within this service in, say, a propertyTable so that it can be picked up and used elsewhere in the code?

  Below is a simplified version of what I'm trying. It would seem that the dialog box creates the static_text until the function running in an AsyncTask() filled the value for him. Is it possible to force the sequence of events and cause the dialogue to wait there a value for its use? What is the most obvious thing that I'm doing wrong here?

  Thanks much for any help!

  Erik

  local photo = catalogue: getTargetPhoto()

  getCustomMetadata (propertyTable) of the local service

  LrTasks.startAsyncTask (function()

  propertyTable.mymetadata = picture: getPropertyForPlugin ('com.myid.myplugin', "mymetadata")

  end)

  end

  function exportDialogSections.startDialog (propertyTable)

  getCustomMetadata (propertyTable)

  end

  function exportDialogSections.sectionsForTopOfDialog (f, propertyTable)

  return {}

  {

  title = "Test."

  {f: Row}

  {static_text: f}

  title = propertyTable.mymetadata,

  },

  },

  },

  }

  end

  Plugins to handle this is to run all their logic within a single asynchronous task.  But in your case, I don't see how this approach could be used, since you can't control when sectionsForTopOfDialog() is called.

  You could have sectionsForTopOfDialog() survey politely until the task finishes:

  function exportDialogSections.sectionsForTopOfDialog (f, propertyTable)
      local done = false
      LrTasks.startAsyncTask (function ()
          propertyTable.mymetadata =
              photo:getPropertyForPlugin ('com.myid.myplugin', 'mymetadata')
          done = true
          end)
      local delay = 0.01
      while not done do
          LrTasks.sleep (delay)
          delay = math.min (0.1, 2 * delay)
          end
  
     return {{title =  "Test",
          f:row {f:static_text {title =  propertyTable.mymetadata}}}}
      end
  

• I installed a trial of Illustrator from Adobe on my macbook pro. I want to draw a picture using the custom trace button but can not. Does anyone have any ideas how I could track custom?

  I installed a trial of Illustrator from Adobe on my macbook pro. This is the release of 2014 of the adobe Illustrator. I want to draw a picture using the custom trace button.

  I start a new document. Then I place my scanned pencil/color pencil, drawing, in the document. I tried to scan and then placing it as jpeg, bitmap and a tiff file. I tried scanning and place then, in color and in black and white. The scan mode that I use is flat. Adobe Illustrator allows me to select the default button and one of the eleven preset buttons (e.g. photo high fidelity), but cannot me click on the record button custom. The custom trace button is gray while all other buttons are white.

  Does anyone have any ideas how I could track custom?

  Just it trace, and then change the options later. The follow-up is 'live', you can press the buttons and see what happens.

  See also the manual.

• When you use a custom URL to preview Live, Chrome says that it cannot connect

  When you use a custom URL to preview Live, Chrome says it can't connect and Adobe Code declares that the browser has navigated away from the project.

  I'm trying so he can use the same port every time, so I can code on Localhost using the Facebook API.

  See you soon

  Hello BeamJinn,

  The port on the local host to the live preview changes all the time?

  If you specify a URL of Base Live Preview, so you need a webserver running on this address and port.

  For example:

  If you are running an Apache Server on port 8080, you must enter http://localhost: 8080 as the base URL. If you now work on your files in the folder of your installation of Apache document root, you should be fine and the live preview should work as expected.

  HTH,

  Ingo

• Using Preview in the workflow files Proress do not save time

  I just cut together a dramatic scene with some P2 files a friend / colleague gave me to see how the PRI would manage the project. That's what happened.

  1.I created a custom sequence which the parameter overview were Prores 422. The rest is the size / image format and pace of the clips.

  2 import the files and started cutting immediately. Playback was smooth. A nice creative process carefully.

  3. after the minute.piece Cup 3, I went back to fix the colors. I prefer 2 Colorista MB for this kind of work. The sequence of course would not be reading to FULL or HALF and QUARTER resolution was not acceptable for viewing. So, I made the sequence.

  4. There were approximately 35 cups in the room and each clip was cc. Make it to Prores took about 10 minutes.

  5. After reviewing the, I exported the sequence. I selected "Match sequence settings" and "use realized." I figured since all clips have been made like Prores and my output format was Prores would zip along. Export took 10 minutes.

  Can someone explain to me why using the codec rendered Prores files (in 10 minutes) seemed not to expedite the export process using all these clips overview. Im a little confused and discouraged.

  Well, there you have it. No smart rendering in PrP. This explains why the export function is slow compared to the CPF, although ingestion and more quickly (because of no transcoding required). I can't say that Im not disappointed. There is nothing a client like less, after a long edit session and then to hear "' Oh, it will be ready in 2 hours... it must always return. '" This could be a real problem which eventually limit the use of PrP for many people.

• differences in the use of a backup Favorites file ".json" and a file of bookmarks '.html '.

  Hi all
  What is the difference between the use of a backup Favorites file ".json" and a file of bookmarks ".html"? It seems that both of them do the same job. If this is the case, then why there are two options (.json and .html) to do the same job? If this isn't the case, then what is the reason for the availability of the two options and how are they different? Although I read the material, it didn't quite clear form me again. Please be so kind enough to elaborate on the question so that I can get a clear understanding of their good use (s).
  Thank you very much in advance for your time and skills

  Hello

  See questions/684284

• How can I clear the browser history when you use the custom settings for history?

  When my history option is set to "Use the custom settings for history", the options page has no link to "clear recent history". There was formerly a menu option, but that seems to be gone now with Firefox 29. Is my only option to access the dialog box, clear the history all to change the historical option to history to remember and then change it back? Is there another way to access the option erase history all?

  I think you can get the menu bar by pressing the ALT key. If you want to return permanently, click View > toolbars and check menu bar.