Use of data from 2 GB/hour

Similar Questions

• Use of data from the system services

  My iPhone starts 5s have a huge use of Data Services system. For a minute, it takes 100 MB (in detail its all used in general). Anyone knows what is coming? Because until now was without any problem. Thank you.

  Hello LucieMai,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to keep the data, and I will do everything I can to help. Every time we see an increase of the data after a recent update as 9.3.3 is a good idea to restart if you have not already. If the behavior persists after restarting, you may want to try to reset the network settings. This will ensure that your phone is using the last settings contact your carrier and your Wi - Fi access. Don't worry, this will only affect the settings like Wi - Fi and VPN passwords. Your content is not deleted. You have to reenter your Wi - Fi password once your device restarts.

  Make then select settings > general > reset > reset the network settings on your device.

  If you have any questions or concerns, the entire community is here to help.

  -Best regards

• When I try to import the Favorites of IE using "Import Data from Other Browser" it is grayed out. Why is this?

  I'm trying to follow the instructions of the Firefox Help. Step 2 to import bookmarks is to select the option "Import data from another browser" in history-library-import and backup. However, this option is grayed out for me and I can't select it. Why is this grayed out? How can I make this?

  Make sure that you do not use Firefox mode of private - browsing using Firefox without saving history .

  • To view the history settings and cookies, choose: Firefox > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • : Uncheck the [] "always use the private browsing mode.

  Now do-> Import Favorites to Internet Explorer

  Check and tell if its working.

  Not related to your problem, but your Plugins are out of date

  • Update all of your Firefox Plugins-> https://www.mozilla.org/en-US/plugincheck/
  • During the installation of the Plugins download files hotfix, remove the check mark to download any other software options with your Plugins (for example, toolbars, McAfee, Google Chrome, etc.)

• Use the data from a DataSet as a source for another (the join between the sets of data)

  Hello. I come with a problem, very simple, but which I think is not implemented in the beer Pub.
  
  In the DataModel, I create a DataSet, providing some data (for example, a string from a web service), and after this, I create another set of data that uses this string as a parameter for a database query. Is this possible? The only link I found between the sets of data is only this concatenation of the main data set.
  
  Is there a way that I can do? Thank you!
  
  * [url http://www.java-forums.org/blogs/advanced-java/collection/] Java collection *.

  In Publisher 10 g and sooner you can use a data model to the join and the structure of data from different sources SQL.

  In Publisher, 11g, you can join data sets for which Publisher can 'know' on the data fields. For example. In addition to SQL data sets, you can reach Excel, LDAP, MDX and answers. Web Services, like XML file are data sets that editor does not know the data fields, so unfortunately, no way to join them... I know.

  Also, true that LOVs can either be SQL or data fixed (i.e. the entered values).

  Allowing the Web Service as a source of LOV or a way to define data fields, it's something for us to consider for a future version.

  Mike

• Using the data from the text file to the plot on a histogram

  Hi professionals of the NC.

  I have a data file text attached with 3 columns of data and I would draw it with a histogram.

  Unfortunately, the histogram data to create will not let me extract the values I want to draw it...

  I've seen some of the older ones on how to do that, unfortunately, it was a very long thread and the screw, images have been corrupted.

  Someone has a great solutions for this...? Really appreciate it!

  Hi Lexen,

  no need to use ExpressVIs:

  

  I used the simple histogram function, there is a step where you can provide more parameters. And I used LV2011, so the ReadSpreadsheetFile function looks different than in the latest versions of LabVIEW.

  in the desire to tell graphic C Red, G will be blue and D in green...

  I don't know what means DMC, but change properties parcel should be pretty easy!

• 71622 error code when you use read data from the encoder vi

  Hi, im using PXI7340 Motion control and I get the error-71622 code that is not defined if I try to search in the help explain error section. I get this error when I try to use reading encoder vi data. I would like to get the index data and I can not find that an another vi Traoré did this. Any suggestions

  Again, could you please show me how you have implemented that?

  Let's take a step back. What exactly are you trying to accomplish? You want to find the index position? Can find reference should do the job for you.

• Use of data blackBerry Passport Standby mode

  Hello, I have a problem with the use of data from the idle mode on my passport for BlackBerry. IT uses the largest amount of data, more than any other about 650 mb in 8 days. When I enter the application manager and tap the Standby Mode it constantly shows in any case "no use of data during the last 48 hours" and the leeks of data... could you explain what happens?

  Probably, it is the synchronization of e-mail and other data for example, if you have a cloud service like box or dropbox sync to your device.

• use of data lollipop no date bar

  previously in 4.4.4 there is a bar to check the use of accurate date data. now there is no bar, and I don't see the use of data from the cycle. How to make the rear bar?

  From what I see, I'm afraid, this is not available in lollipop.

• Use of data/wi-fi high BBM BBM

  In the last month BBM started using amounts of data very high. I don't use any, but he used 3.6 GB of wi - fi and 36.6 MB of data. Now I can deal with that for the moment I'm maternity made primarily on wi - fi, but the use of data of this magnitude cannot be good for an application that is never used. I think it might be because the upgrade to 10.8.5.15 but can't remember the exact date, I upgraded.

  Is it possible to remove my BlackBerry BBM or prevent him from being able to use my data?

  Thank you.

  With the help of your main device settings > Security > Parental control > you can lock the BBM to disable the device.

  Try and see if it disables the use of data from BBM surveys.

  Do not forget your password!

• Using the data logged in an interface with the aggragate function

  Hello
  
  I'm trying to use logged data from a source table in one of my interfaces in ODI. The problem is that one of the mappings on the columns target implies a function (sum) overall. When I run the interface, I get an error saying not "a group by expression. I checked the code and found that the columns jrn_subscriber, jrn_flag, and jrn_date are included in the select statement, but not in the group by statement (the statement group contains only remiaining two columns of the target table).
  
  Is there a way to get around this? I have to manually change the km? If so how would I go to do it?
  
  Also I'm using Oracle GoldenGate JKM (OGG oracle for oracle).
  
  Thanks and really appreciate the help
  
  Ajay

  "ORA-00979"when the CDC feature (logging) using ODI with Modules of knowledge including the aggregate SQL function works [ID 424344.1]
  Updated 11 March 2009 Type status MODERATE PROBLEM

  In this Document
  Symptoms
  Cause
  Solution
  Alternatives:

  This document is available to you through process of rapid visibility (RaV) of the Oracle's Support and therefore was not subject to an independent technical review.

  Applies to:
  Oracle Data Integrator - Version: 3.2.03.01
  This problem can occur on any platform.
  Symptoms
  After successfully testing UI integration ODI using a function of aggregation such as MIN, MAX, SUM, it is necessary to implement change using tables of Journalized Data Capture operations.

  However, during the execution of the integration Interface to retrieve only records from Journalized, has problems to step load module loading knowledge data and the following message appears in the log of ODI:

  ORA-00979: not a GROUP BY expression
  Cause
  Using the two CDC - logging and functions of aggregation gives rise to complex problems.
  Solution

  Technically, there is a work around for this problem (see below).
  WARNING: Problem of engineers Oracle a severe cautioned that such a type of establishment may give results that are not what could be expected. This is related to how ODI logging is applied in the form of specific logging tables. In this case, the aggregate function works only on the subset that is stored (referenced) in the table of logging and on completeness of the Source table.

  We recommend that you avoid this type of integration set ups Interface.
  Alternatives:

  1. the problem is due to the JRN_ * missing columns in the clause of "group by" SQL generated.

  The work around is to duplicate the knowledge (LKM) loading Module and the clone, change step "Load Data" by editing the tab 'Source on command' and substituting the following statement:
  <%=odiRef.getGrpBy()%>

  with
  <%=odiRef.getGrpBy()%>
  <%if ((odiRef.getGrpBy().length() > 0) && (odiRef.getPop("HAS_JRN").equals("1"))) {%>
  JRN_FLAG, JRN_SUBSCRIBER, JRN_DATE
  <%}%>

  2. it is possible to develop two alternative solutions:

  (a) develop two separate and distinct integration Interfaces:

  * The first integration Interface loads the data into a temporary Table and specify aggregate functions to use in this initial integration Interface.
  * The second integration Interfaces uses the temporary Table as Source. Note that if you create the Table in the Interface, it is necessary to drag and drop Interface for integration into the Source Panel.

  (b) define the two connections to the database so that separate and distinct references to the Interface of two integration server Data Sources (one for the newspaper, one of the other Tables). In this case, the aggregate function will be executed on the schema of the Source.

  Display related information regarding
  Products

  * Middleware > Business Intelligence > Oracle Data Integrator (ODI) > Oracle Data Integrator

  Keywords
  ODI; AGGREGATE; ORACLE DATA INTEGRATOR; KNOWLEDGE MODULES; CDC; SUNOPSIS
  Errors
  ORA-979

  Please find above the content of the RTO.
  It should show you this if you search this ID in the Search Knowledge Base

  See you soon
  Sachin

• extracting data from the CLOB using materialized views

  Hello

  We have xml data from clob which I have a requirement to extract (~ 50 attributes) on a daily basis, so we decided to use materialized views with refreshes full (open good suggestions)

  A small snippet of code

  CREATE THE MWMRPT MATERIALIZED VIEW. TASK_INBOUND

  IMMEDIATE CONSTRUCTION

  FULL REFRESH ON DEMAND

  WITH ROWID

  AS

  SELECT M.TASK_ID, M.BO_STATUS_CD, b.*

  OF CISADM. M1_TASK m,

  XMLTABLE (' / a ' XMLPARSE PASSING ())

  CONTENT '< a > | M.BO_DATA_AREA | "< /a >."

  ) COLUMNS

  serviceDeliverySiteId varchar2 (15) PATH

  "cmPCGeneralInfo/serviceDeliverySiteId"

  serviceSequenceId varchar2 (3) PATH "cmPCGeneralInfo/serviceSequenceId"

  completedByAssignmentId varchar2 (50) PATH "completedByAssignmentId."

  Cust_id varchar2 (10) PATH "cmPCCustomerInformation/customerId,"

  ACCT_SEQ varchar2 (5) PATH "customerInformation/accountId"

  AGRMT_SEQ varchar2 (5) PATH cmPCCustomerAgreement/agreementId"."

  COLL_SEQ varchar2 (5) PATH "cmPCGeneralInfo/accountCollectionSeq"

  REVENUE_CLASS varchar2 (10) PATH "cmPCCustomerAgreement/revenueClassCode"

  REQUESTED_BY varchar2 (50) PATH ' attributes customerInformation/contactName',...~50

  This ddl ran > 20 hours and no materialized view created. There are certain limits that we have

  • Cannot create a materialized view log
  • cannot change the source as its defined provider table
  • cannot do an ETL

  DB is 11g R2

  Any ideas/suggestions are very much appreciated

  I explored a similar approach, using the following test case.

  It creates a table "MASTER_TABLE" containing 20,000 lines and a CLOB containing an XML fragment like this:

  09HOLVUF3T6VX5QUN8UBV9BRW3FHRB9JFO4TSV79R6J87QWVGN

  UUL47WDW6C63YIIBOP1X4FEEJ2Z7NCR9BDFHGSLA5YZ5SAH8Y8

  O1BU1EXLBU945HQLLFB3LUO03XPWMHBN8Y7SO8YRCQXRSWKKL4

  ...

  1HT88050QIGOPGUHGS9RKK54YP7W6OOI6NXVM107GM47R5LUNC

  9FJ1JZ615EOUIX6EKBIVOWFDYCPQZM2HBQQ8HDP3ABVJ5N1OJA

  then an intermediate table "MASTER_TABLE_XML" with the same columns with the exception of the CLOB which turns into XMLType and finally a MVIEW:

  SQL > create table master_table like

  2. Select level as id

  3, cast ('ROW' | to_char (Level) as varchar2 (30)) as the name

  4       , (

  5. Select xmlserialize (content

  XMLAGG 6)

  7 xmlelement (evalname ('ThisIsElement' | to_char (Level)), dbms_random.string ('X', 50))

  8                    )

  9 as clob dash

  10                  )

  11 double

  12 connect by level<=>

  (13) as xmlcontent

  14 double

  15 connect by level<= 20000="">

  Table created.

  SQL > call dbms_stats.gather_table_stats (user, 'MASTER_TABLE');

  Calls made.

  SQL > create table (master_table_xml)

  Identification number 2

  3, name varchar2 (30)

  4, xmlcontent xmltype

  5)

  binary xmltype 6 securefile XML column xmlcontent store

  7;

  Table created.

  SQL > create materialized view master_table_mv

  2 build postponed

  full 3 Refresh on demand

  4, as

  5. Select t.id

  6, t.nom

  7       , x.*

  master_table_xml 8 t

  9, xmltable ('/ r' in passing t.xmlcontent)

  10 columns

  11 path of varchar2 (50) ThisIsElement1 'ThisIsElement1 '.

  12, path of varchar2 (50) ThisIsElement2 'ThisIsElement2 '.

  13, path of varchar2 (50) ThisIsElement3 'ThisIsElement3 '.

  14, path of varchar2 (50) ThisIsElement4 'ThisIsElement4 '.

  15 road of varchar2 (50) ThisIsElement5 'ThisIsElement5 '.

  16, road of varchar2 (50) ThisIsElement6 'ThisIsElement6 '.

  17 road of varchar2 (50) ThisIsElement7 'ThisIsElement7 '.

  18 road of varchar2 (50) ThisIsElement8 'ThisIsElement8 '.

  19 road to varchar2 (50) ThisIsElement9 'ThisIsElement9 '.

  20, path of varchar2 (50) ThisIsElement10 'ThisIsElement10 '.

  21, road to varchar2 (50) ThisIsElement11 'ThisIsElement11 '.

  22 road of varchar2 (50) ThisIsElement12 'ThisIsElement12 '.

  23 road of varchar2 (50) ThisIsElement13 'ThisIsElement13 '.

  24, path of varchar2 (50) ThisIsElement14 'ThisIsElement14 '.

  25 road of varchar2 (50) ThisIsElement15 'ThisIsElement15 '.

  26, path of varchar2 (50) ThisIsElement16 'ThisIsElement16 '.

  27, way to varchar2 (50) ThisIsElement17 'ThisIsElement17 '.

  28 road of varchar2 (50) ThisIsElement18 'ThisIsElement18 '.

  29 road of varchar2 (50) ThisIsElement19 'ThisIsElement19 '.

  30, path of varchar2 (50) ThisIsElement20 'ThisIsElement20 '.

  31, path of varchar2 (50) ThisIsElement21 'ThisIsElement21 '.

  32 road of varchar2 (50) ThisIsElement22 'ThisIsElement22 '.

  33, path of varchar2 (50) ThisIsElement23 'ThisIsElement23 '.

  34 road of varchar2 (50) ThisIsElement24 'ThisIsElement24 '.

  35 road of varchar2 (50) ThisIsElement25 'ThisIsElement25 '.

  36, road to varchar2 (50) ThisIsElement26 'ThisIsElement26 '.

  37, path of varchar2 (50) ThisIsElement27 'ThisIsElement27 '.

  38, path of varchar2 (50) ThisIsElement28 'ThisIsElement28 '.

  39, path of varchar2 (50) ThisIsElement29 'ThisIsElement29 '.

  40, road of varchar2 (50) ThisIsElement30 'ThisIsElement30 '.

  41 road of varchar2 (50) ThisIsElement31 'ThisIsElement31 '.

  42, path of varchar2 (50) ThisIsElement32 'ThisIsElement32 '.

  43, road to varchar2 (50) ThisIsElement33 'ThisIsElement33 '.

  44, path of varchar2 (50) ThisIsElement34 'ThisIsElement34 '.

  45, path of varchar2 (50) ThisIsElement35 'ThisIsElement35 '.

  46, path of varchar2 (50) ThisIsElement36 'ThisIsElement36 '.

  47, path of varchar2 (50) ThisIsElement37 'ThisIsElement37 '.

  48, path of varchar2 (50) ThisIsElement38 'ThisIsElement38 '.

  49, path of varchar2 (50) ThisIsElement39 'ThisIsElement39 '.

  50 road of varchar2 (50) ThisIsElement40 'ThisIsElement40 '.

  51, path of varchar2 (50) ThisIsElement41 'ThisIsElement41 '.

  52, path of varchar2 (50) ThisIsElement42 'ThisIsElement42 '.

  53, path of varchar2 (50) ThisIsElement43 'ThisIsElement43 '.

  54, path of varchar2 (50) ThisIsElement44 'ThisIsElement44 '.

  55 road of varchar2 (50) ThisIsElement45 'ThisIsElement45 '.

  56, path of varchar2 (50) ThisIsElement46 'ThisIsElement46 '.

  57, path of varchar2 (50) ThisIsElement47 'ThisIsElement47 '.

  58 road of varchar2 (50) ThisIsElement48 'ThisIsElement48 '.

  59 road of varchar2 (50) ThisIsElement49 'ThisIsElement49 '.

  60 road of varchar2 (50) ThisIsElement50 'ThisIsElement50 '.

  (61) x;

  Materialized view created.

  The discount is then performed in two steps:

  1. INSERT INTO master_table_xml
  2. Refresh the MVIEW

  (Note: as we insert in an XMLType column, we need an XML (only root) document this time)

  SQL > set timing on

  SQL >

  SQL > truncate table master_table_xml;

  Table truncated.

  Elapsed time: 00:00:00.27

  SQL >

  SQL > insert into master_table_xml

  2. select id

  3, name

  4, xmlparse (document '' |) XmlContent |'')

  5 master_table;

  20000 rows created.

  Elapsed time: 00:04:38.72

  SQL >

  SQL > call dbms_mview.refresh ('MASTER_TABLE_MV');

  Calls made.

  Elapsed time: 00:00:22.42

  SQL >

  SQL > select count (*) in the master_table_mv;

  COUNT (*)

  ----------

  20000

  Elapsed time: 00:00:01.38

  SQL > truncate table master_table_xml;

  Table truncated.

  Elapsed time: 00:00:00.41

• How to paste some data from numbers to some placeholders in the Pages using AppleScript and Automator?

  ​

  Hello AppleScript and Automator Pros!

  Unique ID	Elements	Quantity	Unit of measure	Sum, $	Color	Dark?
  1	Pencil	1	Agenda	90.50	P	Yes
  2	Pen	150	Agenda	300.23	THERE	NO.
  3	Pillow	2	Agenda	400.01	B	NO.
  4	Toy	114	Agenda	500.30	R	Yes
  5	Repair service	N/A	N/A	1.00	N/A	NO.
  6	Phone	98	Agenda	1986.10	W	NO.
  P = purple Y = yellow B = black R = red W = white

  It was an example of Document numbers

  
  

  Now the example of Document Pages

  [PH for Unique ID] - Ben got: [PH for element], [PH for quantity] [PH for unit of measure], [dark or not PH] [PH for color] for [PH for sum before the comma] $ [PH cents] c.

  When Ben had [PH for quantity] [dark or not PH] [PH for Color] [PH for item tiny first character and changeable if necessary end], he became happy

  Example 1: Allows you to take data from line with Unique ID 1 and that's what it takes to go:

  1 - Ben got: pencil, 1 point, violet dark 50 ° c for $ 90.

  When Ben had 1 Purple Pencil dark, he became happy

  Example 2: Now data row with Unique ID 3 and it is what to get:

  3 - Ben got: Pillow, 2 pieces, blue for $ 400 01b

  When Ben had 2 blue pillows he became happy

  Example 3: Now the data used to row with Unique ID 5 and this is what it takes to get:

  5 - Ben got: repair service, 1 service, for 1$ 00 c complete

  When Ben had 1 repair service complete, he became happy

  Here, I have to change given n/d of the table in numbers and replace quantity with 1 PH, PH for unit of measure with service (no point as in the previous examples) and the PH for color with plenty of example.

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• What is the best strategy to migrate data from Windows to one Mac to another? I use Parallels Desktop to run Windows on my current Mac but want to use Bootcamp on my new.

  What is the best strategy to migrate data from Windows to one Mac to another? I use Parallels Desktop to run Windows on my current Mac but want to use Bootcamp on my new.

  If it is only the data (not apps) I use Dropbox. It turned out to be the best way to move things between the side Mac and the bootcamped Windows of my iMac side. I don't see why it would not work to move data from a virtual machine installation of Win to a BootCamp installation.

• DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

  Greetings HP Forum,

  Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

  NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

  Thanks in advance for your help... I greatly appreciate it!

  See you soon!

  Wes

  It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.