Use of data high IP6 cell mode

Similar Questions

• Use of data blackBerry Passport Standby mode

  Hello, I have a problem with the use of data from the idle mode on my passport for BlackBerry. IT uses the largest amount of data, more than any other about 650 mb in 8 days. When I enter the application manager and tap the Standby Mode it constantly shows in any case "no use of data during the last 48 hours" and the leeks of data... could you explain what happens?

  Probably, it is the synchronization of e-mail and other data for example, if you have a cloud service like box or dropbox sync to your device.

• Use of data cell after the upgrade to iOS 10.0.2 has increased dramatically

  Hello:

  I noticed a HUGE increase in mobile data usage by my phone (iPhone 6s) after the iOS to 10.0.2 update.    I had not changed anything since before the update.  A few days after my phone iOS update my more than double to 15 days prior to the cell data update!   I went under a GB to 2.2 GB for two days.  I am only allowed 2.5 GB of my company.   Assist of WiFi was interrupted. I am connected to a wifi most of the time, all day at the office and at home in the morning and in the evening.  I haven't changed my phone usage habits nor have I down loaded new applications.   I also did all the stuff reset once I downloaded the update as turning on and off, hold down home and appears on the sides until that little Apple.

  I looked in the cell parameters section and noticed a few things that consume more data:

  Facebook: I had disabled cell Facebook use.   However, there was a large amount of data used. I also, by habit, only check Facebook when I'm at a known wifi spot as the House or the office.   It was less than a MB before and near a GB of data in 2 days.

  YouTube: Idem, had turned off cell phones and only look at the House.

  Maps - never used but the use of data.

  e-mail-HUGE amount of data used.  Normal use for me. in the past, the amount of data has been a MB.  Now it's 65 MG in 2 days,

  Siri - I do not use Siri as in "Hey Siri" or by using voice commands.  I use it from time to time to the voice on texts.

  AccuWeather.  Even.

  It's just as much as the apps that I use, the rest is electronic mail and stuff systems.   I uninstalled nearly all applications except for the few that I need as my ticket train and planning aps and mail want to stop this.   I won't send any imessages anymore.

  Quite an experience of something like that?

  Yes! I have iPhone 6 - after that the update almost all my data is gone for the month! I do not have Wifi Assist on and I only use data when I'm home and can connect to Wifi!

  I see my iPhone to connect to my Wifi then bounce to the cellular network. I have no problem with my home wifi network. This problem also occurs in the work. In addition, the network at work requires the password to the network - I type in iPhone tells me it's the wrong password, and then it connects. Then it disconnects after 2 minutes.

  I tried to reset the Wifi feature. Help!

• Skype on iPhone 4S with 3G data uses 3G connection or a cell phone?

  When you use Skype on an iPad, the manual that we saw clearly that Skype is using the Wifi connection. We now have an iPhone 4S with 3G. Is a Skype call to a contact in the computer using 3G data network to connect, or is it using the cell phone?

  It uses the 3G network. Skype's VOiP (voice over internet protocol similar to FaceTime), so it does not use your cellular network. If you have a data plan unlimited, then go nuts. If this isn't the case, monitor your data usage to make sure you don't exceed, which should not be a problem, unless you still do video calls.

• Apple music and use of data in offline mode

  I need someone to address this concern:

  I downloaded a number of playlists and songs on my iPhone for offline listening. Even though I'm in my car, I have to listen to these songs & playlists. I noticed that I always use data for the application of music and also some data in my system services on my iPhone.

  Why is this happening? I was under the assumption that if I listen to the music that has been downloaded for listening offline, there is no use of data...

  Thank you

  Your music will be always connect to Apple and validate that you have an active Apple music subscription so that you can play music downloaded in offline mode. I suspect that's what you see, unless the use of data is important.

• Use of data/wi-fi high BBM BBM

  In the last month BBM started using amounts of data very high. I don't use any, but he used 3.6 GB of wi - fi and 36.6 MB of data. Now I can deal with that for the moment I'm maternity made primarily on wi - fi, but the use of data of this magnitude cannot be good for an application that is never used. I think it might be because the upgrade to 10.8.5.15 but can't remember the exact date, I upgraded.

  Is it possible to remove my BlackBerry BBM or prevent him from being able to use my data?

  Thank you.

  With the help of your main device settings > Security > Parental control > you can lock the BBM to disable the device.

  Try and see if it disables the use of data from BBM surveys.

  Do not forget your password!

• Use of data excessive mobile (cellular data) of Documents & Sync

  I had a problem during the last 3 or 4 days of my iPhone using excessive amounts of mobile data.

  Typically, in a month, I use about 3 GB of data. In the last 4 days I used more 2 GB despite spending most of the time in places with WiFi.

  Once I realized that something was up (when I had to buy updates data in 72hrs 2 x 1 GB). I started to look for a cause by using the data provided under settings > Mobile Data (cellular data).

  Tried a couple of things:

  (1) under settings > iTunes & App Stores "use mobile data" has been attributed to.

  It was weird, I'm pretty sure the last time I checked it was off. In any case, I changed it to off.

  Under data Mobile > System Services, I could see the data used by iTunes had fallen back. This has helped reduce the use of data, but has not solved the problem.

  (2) under settings > iCloud > iCloud Drive 'use mobile data' has been assigned to.

  Didn't know it, but he found Googling for a solution. I changed it to off. Makes very little difference.

  After making these changes I switched back on Mobile Data. I always saw use of massive data, about 50 MB in 30 minutes.

  When I checked in Mobile Data > Services system by far the largest user of data is listed as 'Documents & Sync '. I don't know what it does.

  I signed up for my iCloud on the phone. This sewing to help, but I couldn't leave it that way for a long time, because missed me my calendar and contacts so I signed in and turn all my iCloud (except mail) services.

  So, as soon as now I have dial-up mobile data wide completely. I'm only able to use my phone on WiFi, so it is essentially a super expensive iPod Touch.

  I really need help with this, I hope someone can tell me please a solution or at least explain what might use data labeled as «Documents & Sync»

  If I can't get to the bottom of it I'll have to switch to another phone, my career here in New Zealand do not offer unlimited plans :-(

  Some details on my phone and the settings:

  • iPhone running iOS 9.2.1 6 (13D 20)
  • Phone has 128 GB of storage with about 10 GB of free space
  • iCloud, I use it for everything except the storage of email and document
  • I have iTunes game, Apple Music/subscriptions
  • iCloud library is running
  • All I can find with a setting for her except for Apple's music is set to use only data on WiFi

  An update.

  It has been suggested that I have disable Wi - Fi pass to see if that would help.

  I ran several tests. This apparently made no difference.

  Tests in 15 minutes will help the periods that I sometimes see very low use with WiFi help on & I see still on a very high, sometimes use 4G data and WiFi turned off.

  Worst when I was walking with WiFi and 4G data but WiFi help out I've seen data use of 39.5 MB in 15 minutes, this 35.1 MB was allocated the mysterious return «data & Sync»

  Test details:

  Test 1.

  local time 10:00-10:15.

  • WiFi off
  • 4 G Mobile Data on and connected with good signal
  • Assist off WiFi
  • Changing the mode of the aircraft at the beginning of the test
  • Stationary situation during the test

  Total mobile data use 1.4 MB

  (Documents & Sync 3.2 KB)

  Test 2.

  local time 10:30-10:45.

  • WiFi on and connected with good signal
  • 4 G Mobile Data on and connected with good signal
  • Assist of WiFi on
  • Changing the mode of the aircraft at the beginning of the test
  • Stationary situation during the test

  Use of mobile data total 57.8 KB

  (Documents & Sync 2.1 KB)

  Test 3.

  local time 13:00-13:15.

  • WiFi off
  • 4 G Mobile Data on and connected with good signal
  • Assist off WiFi
  • Changing the mode of the aircraft at the beginning of the test
  • Stationary situation during the test

  Total mobile data use 9.0 MB

  (Documents & Sync 28.6 KB)

  Test 4.

  local time 13:20-13:35.

  • WiFi on but not connected to a constant signal
  • 4 G Mobile Data on and connected with good signal
  • Assist off WiFi
  • Changing the mode of the aircraft at the beginning of the test
  • Mobile location (market) during the test

  Total mobile data use 39.5 MB

  (Documents & Sync 35.1 MB!)

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• Numbers - how to import external data to a cell in a single file into a new cell in another file?

  Numbers - how to import external data to a cell in a single file into a new cell in another file?

  I want to do the same thing in numbers (3.6.2 (2577) I used to do in Excel (any version):)

  to import a calculation of a cell in a file in a new cell in another file.

  Example: I want to import the result of a sum in a specific cell of my accountant in August to a cell in comparison in my accounting of September.

  It was so easy in Excel. Until the reference computer broke down.

  By the numbers, I tried to copy - paste the contents of the cell formulated, but not good.

  No help manual online or anywhere. I think that maybe the function is absent in number.

  Then I return to MicroSoft Excel, that I have used for many years and I am sorry to say feel much more wysiwyg.

  Formulas in a numbers document cannot reference cells in other documents of numbers.

  "Much more wysiwyg" is another way to express what many of those who "used (MS Excel) for many years" expressed as "more intuitive. These two descriptions usually boil up to ' what I'm used to, ", which is also true in the other sense.

  Whatever the real explanation, the standard advice is "the tool that will do the job." If "the job" requires referencing values in a separate document, the numbers (alone and without the help of AppleScript) are not the best tool for this job.

  Kind regards

  Barry

• IPhone-to-iPad call phone cellular continuity uses the data

  Many times I drive to work using my iPad Mini 4 WiFi + cell phones driving to work to play music of different applications via bluetooth to my car audio system.

  Whenever my phone rings, my iPad has the T-Mobile (my support for iPhone & iPad) also allows cellular continuity. My question is, if I were to answer the call on my iPad I will be charged data or the call still counts against cellular minutes? So, basically the iPad use VoIP (data) or VoLTE (phone calls / minutes) to manage the call? Thanks for any help!

  Updated - talked with my contact at T-Mobile, who is Advisor senior technical/engineering. He said phone calls on iPad via transfer cell/continuity is currently working on Facetime Audio that is essentially a VoIP service and use the cell data.

  However, T-Mobile is looking for ways to eliminate the use of data for its customers on Facetime Audio (and perhaps even Facetime video as well) through their programs free music and frenzy on. If that happens, it would be incredible!

• Do the numbers tell me the last date of a cell containing specific text

  Hi guys,.

  I'm setting up a pilot logbook and I need to keep track of when I lead some approaches to the instruments for the purposes of recency.

  For example, the last time I did a VOR approach was April 20, 16.  I need the numbers to recognize the "VOR" text and give me the corresponding date.  I'm having numbers give me this date in a separate table.

  Any ideas on how to do this would be greatly appreciated.

  

  Thank you!

  Hi Walter,

  This is a roundabout way. Perhaps another user will display a more elegant way.

  

  Table 1 is a version abridged your journal of driving. Here is table 2:

  

  Table 2 uses the SIERREUR function to place "" (NULL) if the SEARCH fails to find a match between the value in the header line and an entry in the log of your flight.

  Otherwise, it inserts a value (The FIND returns the starting position of a string in another).

  Now we've found BK VOR (and fill to the right) and SID.

  Columns needed for approaches more more!

  

  Table 3 is a Date of any cell in table 2 which is not "" (NULL).

  Formula in A2 (and fill down and fill the right)

  = IF(Table 2::A2≠"",Table 1::$A2,"")

  You can type this than = IF (table 2::A2 <>"", Table 1: $A2, "")

  3 numbers will change <>≠

  Formula of the cell footer of table 3 (for column A, then fill to the right)

  = MAX (A)

  To improve the 'presentation', move (copy / paste) 2 Table to another worksheet (TAB). The formulas will adjust automatically.

  

  Happy flying!

  Kind regards

  Ian.

• use the contents of the cell to a cell reference of formula calculate

  In Apple "Numbers", in order to update a spreadsheet each time that the values are added, I first need to calculate the number of days between the date of first entry and last date, using the COUNTA() method. Gives me the line number of the last entry.  For this I "CONCATENATE" a column letter known to a cell reference.

  Using this cell reference, I would like to know how can I use the contents of the cell to update the information contained in the rest of the worksheet. Is this possible?

  Any help would be appreciated.

  Thanks in advance.

  I have a problem following exactly what you want to do, but think that INDIRECT can help.  More here.

  SG

• FaceTime uses the data

  FaceTime uses the data when it is off wifi?

  Yep, it will use the cell data. About 3 MB of / minute.

• Numbers automatically selects the "date format" for cells.

  Numbers automatically format selects 'date' of certain cells.

  I need "numbers."

  I want to calculate simple interest due on the amount, the interest rate and number of days.

  When I input "number" format of the result cell and calculate the amount * rate * number of days divided by 365 always automatically shows something unwanted and the format "date." Furthermore, I'm not able to change the AutoFormat ("date") in "number".  How to bypass this automatic selection?

  Thanks in advance

  UbiUbu

  Maybe you can share what, exactly, you enter in a cell.  A screenshot is also useful.

  

  Here's a way to do what I think you want:

  Enter amounts in cells B1, B2 and B3

  Select cell B6, and type (or copy and paste it here) the formula:

  =B2*B3*B1/365.25/100

  shortcut for this is:

  B6=B2*B3*B1/365.25/100

• iPhone facebook messenger using mobile data

  Hello

  My iphone 6 (with IOS 9.2, I think) uses a large number of mobile phones with video calling Facebook messenger some time connected Wifi. I have assist disabled Wifi. I installed MyDataManager and it shows me that, within a period of half an hour this morning, I used the Wifi 1.5 and 0.5 GB of mobile data. My mobile provide agrees that I used a lot of mobile data today. Which is the only time today I did something data-intensive.

  I saw this happen several times over the past two months where I was sure I was on wifi, but used a lot of mobile data.

  Looking for the forum and can "t find all other references to FB Messenger doing so.

  Anyone experienced this? All solutions?

  What you wanted to hear?

  You know what's using your data. Do you use FB Messenger a lot? Turn off mobile data as a test for a day. If your mobile data fails, you have your answer/solution. Video calls are huge for the use of the data.

  The phone should be able to detect and select wifi on the cell data when both are present, but sometimes it isn't. If your signal wifi cycles or drops during your call video, data of the cell comes into play to keep you going. Even if wifi is disabled.

  Disabling global cellular data or only FB Messenger can be your best way to control this.