Use of data: what-2010 meen?

Hello

What does admission - 2010? Someone has an idea to remove it?

http://imgur.com/DgaWlqU

No, I'm afraid I don't know what it is but it's not like he used all the data.

In looking at code.google.com I see he is reported as a problem here: https://code.google.com/p/android/issues/detail?id=79743

What do you see when you type?

Tags: Sony Phones

Similar Questions

  • Use of data from the system services

    My iPhone starts 5s have a huge use of Data Services system. For a minute, it takes 100 MB (in detail its all used in general). Anyone knows what is coming? Because until now was without any problem. Thank you.

    Hello LucieMai,

    Thank you for reaching out to the Community Support from Apple. I know how it is important to keep the data, and I will do everything I can to help. Every time we see an increase of the data after a recent update as 9.3.3 is a good idea to restart if you have not already. If the behavior persists after restarting, you may want to try to reset the network settings. This will ensure that your phone is using the last settings contact your carrier and your Wi - Fi access. Don't worry, this will only affect the settings like Wi - Fi and VPN passwords. Your content is not deleted. You have to reenter your Wi - Fi password once your device restarts.

    Make then select settings > general > reset > reset the network settings on your device.

    If you have any questions or concerns, the entire community is here to help.

    -Best regards

  • iPhone 5 battery runs very quickly when using mobile data

    When I use mobile data on my iPhone 5, the battery seems to run out quickly. When I say fast, I mean very quickly, it will drop 100% completely dead in 20 minutes. What I do when I use mobile data is send some Snapchats and that's all. I left mobile data on, I have it on when I need to use it. I tried using mobile data for other things, and the same thing happens. Sometimes the phone will completely die to about 40% of the battery being left. I am almost convinced that I need at this point a new battery for my phone. Finally, I want to mention that these problems don't happen when you use mobile data, WiFi. Does anyone have any suggestions?

    iOS: version 9.0.2

    See the following article:

    https://www.Apple.com/support/iPhone5-battery/

    In addition, download the app from the battery life and see what it says about the health of your battery.

  • Use of data excessive mobile (cellular data) of Documents & Sync

    I had a problem during the last 3 or 4 days of my iPhone using excessive amounts of mobile data.

    Typically, in a month, I use about 3 GB of data. In the last 4 days I used more 2 GB despite spending most of the time in places with WiFi.

    Once I realized that something was up (when I had to buy updates data in 72hrs 2 x 1 GB). I started to look for a cause by using the data provided under settings > Mobile Data (cellular data).

    Tried a couple of things:

    (1) under settings > iTunes & App Stores "use mobile data" has been attributed to.

    It was weird, I'm pretty sure the last time I checked it was off. In any case, I changed it to off.

    Under data Mobile > System Services, I could see the data used by iTunes had fallen back. This has helped reduce the use of data, but has not solved the problem.

    (2) under settings > iCloud > iCloud Drive 'use mobile data' has been assigned to.

    Didn't know it, but he found Googling for a solution. I changed it to off. Makes very little difference.

    After making these changes I switched back on Mobile Data. I always saw use of massive data, about 50 MB in 30 minutes.

    When I checked in Mobile Data > Services system by far the largest user of data is listed as 'Documents & Sync '. I don't know what it does.

    I signed up for my iCloud on the phone. This sewing to help, but I couldn't leave it that way for a long time, because missed me my calendar and contacts so I signed in and turn all my iCloud (except mail) services.

    So, as soon as now I have dial-up mobile data wide completely. I'm only able to use my phone on WiFi, so it is essentially a super expensive iPod Touch.

    I really need help with this, I hope someone can tell me please a solution or at least explain what might use data labeled as «Documents & Sync»

    If I can't get to the bottom of it I'll have to switch to another phone, my career here in New Zealand do not offer unlimited plans :-(

    Some details on my phone and the settings:

    • iPhone running iOS 9.2.1 6 (13D 20)
    • Phone has 128 GB of storage with about 10 GB of free space
    • iCloud, I use it for everything except the storage of email and document
    • I have iTunes game, Apple Music/subscriptions
    • iCloud library is running
    • All I can find with a setting for her except for Apple's music is set to use only data on WiFi

    An update.

    It has been suggested that I have disable Wi - Fi pass to see if that would help.

    I ran several tests. This apparently made no difference.

    Tests in 15 minutes will help the periods that I sometimes see very low use with WiFi help on & I see still on a very high, sometimes use 4G data and WiFi turned off.

    Worst when I was walking with WiFi and 4G data but WiFi help out I've seen data use of 39.5 MB in 15 minutes, this 35.1 MB was allocated the mysterious return «data & Sync»

    Test details:

    Test 1.

    local time 10:00-10:15.

    • WiFi off
    • 4 G Mobile Data on and connected with good signal
    • Assist off WiFi
    • Changing the mode of the aircraft at the beginning of the test
    • Stationary situation during the test

    Total mobile data use 1.4 MB

    (Documents & Sync 3.2 KB)

    Test 2.

    local time 10:30-10:45.

    • WiFi on and connected with good signal
    • 4 G Mobile Data on and connected with good signal
    • Assist of WiFi on
    • Changing the mode of the aircraft at the beginning of the test
    • Stationary situation during the test

    Use of mobile data total 57.8 KB

    (Documents & Sync 2.1 KB)

    Test 3.

    local time 13:00-13:15.

    • WiFi off
    • 4 G Mobile Data on and connected with good signal
    • Assist off WiFi
    • Changing the mode of the aircraft at the beginning of the test
    • Stationary situation during the test

    Total mobile data use 9.0 MB

    (Documents & Sync 28.6 KB)

    Test 4.

    local time 13:20-13:35.

    • WiFi on but not connected to a constant signal
    • 4 G Mobile Data on and connected with good signal
    • Assist off WiFi
    • Changing the mode of the aircraft at the beginning of the test
    • Mobile location (market) during the test

    Total mobile data use 39.5 MB

    (Documents & Sync 35.1 MB!)

  • Use of data while you sleep at night

    Ill be sleep at night and wake up with a text saying I used data while he slept. I've got data unlimited, so it is a problem for me. I close my apps when all the time throughout the day and especially at night. I am connected to the Internet and considering all applications are closed that he shouldn't have to data. Ive already used 90% of my data and I have ten days he remains until Bill again.

    SO while he slept connected to Internet with NO open apps I use my data...

    heatherbarry wrote:

    Ill be sleep at night and wake up with a text saying I used data while he slept. I've got data unlimited, so it is a problem for me. I close my apps when all the time throughout the day and especially at night. I am connected to the Internet and considering all applications are closed that he shouldn't have to data. Ive already used 90% of my data and I have ten days he remains until Bill again.

    SO while he slept connected to Internet with NO open apps I use my data...

    If this text from your carrier, it does necessarily mean that data are used as you sleep. This may mean that the company will update its system at midnight (or another time), and then sends the message.

    "Closing" applications from the recent state bar has no effect on a large part of what whatsoever (unless the application does not work correctly). Generally, there is no reason to waste your time doing this.

    Check the settings > General > background App refresh and turn it off for all the apps you don't think you need to do the update when you are not using the. Disable notifications for the applications that you really need not notifications use data.

    Make sure you're phone is plugged into the night. If you have it turned on but not plugged in, the phone will return to cellular data once the screen goes to sleep.

  • iPhone facebook messenger using mobile data

    Hello

    My iphone 6 (with IOS 9.2, I think) uses a large number of mobile phones with video calling Facebook messenger some time connected Wifi. I have assist disabled Wifi. I installed MyDataManager and it shows me that, within a period of half an hour this morning, I used the Wifi 1.5 and 0.5 GB of mobile data. My mobile provide agrees that I used a lot of mobile data today. Which is the only time today I did something data-intensive.

    I saw this happen several times over the past two months where I was sure I was on wifi, but used a lot of mobile data.

    Looking for the forum and can "t find all other references to FB Messenger doing so.

    Anyone experienced this? All solutions?

    What you wanted to hear?

    You know what's using your data. Do you use FB Messenger a lot? Turn off mobile data as a test for a day. If your mobile data fails, you have your answer/solution. Video calls are huge for the use of the data.

    The phone should be able to detect and select wifi on the cell data when both are present, but sometimes it isn't. If your signal wifi cycles or drops during your call video, data of the cell comes into play to keep you going. Even if wifi is disabled.

    Disabling global cellular data or only FB Messenger can be your best way to control this.

  • Apple music and use of data in offline mode

    I need someone to address this concern:

    I downloaded a number of playlists and songs on my iPhone for offline listening. Even though I'm in my car, I have to listen to these songs & playlists. I noticed that I always use data for the application of music and also some data in my system services on my iPhone.

    Why is this happening? I was under the assumption that if I listen to the music that has been downloaded for listening offline, there is no use of data...

    Thank you

    Your music will be always connect to Apple and validate that you have an active Apple music subscription so that you can play music downloaded in offline mode. I suspect that's what you see, unless the use of data is important.

  • How to use a date such as 'Today' in a function without listening for the moment on that date?

    I create a todo list. I know I shouldn't but I'm so stuck on this point that I really want to know the answer. At the bottom of my table, I have a footer line in which I want to show the total number of tasks to be accomplished today and every time that I have "TIC TAC" a box in one of the columns used for checking out my todos, I would like to see it reduced by 1. But apparently from what I found through experimentation is that the keyword 'Today' or a grammatical Word uses the date AND time and only if the time is 00:00:00 AM. So, how can I avoid the time to be included when you filter? I would use today, because then every day he restarts you automatically. Thank you for your time and effort in advance.

    Version numbers: 3.5.3.

    OS X: El Capitan 10.11

    Hi BassPlaya,

    What formula do you use in table leg?

    The NOW function would do what you want?

    Kind regards

    Ian.

  • I can't use Microsoft dates. He tells me to "Install ActiveX control" BUT

    I have everything that I can't use Microsoft dates.  He said "Install ActiveX control" but the instructions or take the following steps to solve the problem is to work for me.  I had the bulk of security installed for some time, but my PC is really slow and stop the little pop ups of what risk etc occur.  I ran the security scan, microsoft set the scan, the malicious software removal tool and the free antivirus, antispyware and they all return that there is no problem.  I need to get the ActiveX control Setup so I can receive all the dates at the top.  Can some one please give me advice on how to do it.  Thank you very much in advance, Ms. ESP :>)

    Is this the same computer as in this thread more early of yours? -Online http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/getting-webpage-error-details-user-agent-pop-up/a09f3911-5e9d-4176-86d6-55edf1d78a9e

    And this one? -Online http://answers.microsoft.com/en-us/protect/forum/protect_scanning/my-windows-online-scranner-window-just-appeared/b1a41787-0658-44fe-b6be-66ce46316215

  • Location using mobile data

    My mobile data is turned off and I am connected to my WiFi. Whenever any application uses location my phone connects for a second to the network and uses mobile data, mobile data are always off. As I use a prepaid SIM, I have to pay for the use of data in 15 minutes, even if my phone connects just for a second. Either I can disable location or delete the APN to solve the problem for now, but it is not a real solution. Someone has an idea?

    What you can try instead of delete the APN is to edit and check the APN type. If the APN type contains "extra", delete and save the APN.

    The GPS in the phone supports assisted startup and can use the mobile network to get your site faster than a normal GPS. Remove "extra" may prevent him from doing it.

  • use of data lollipop no date bar

    previously in 4.4.4 there is a bar to check the use of accurate date data. now there is no bar, and I don't see the use of data from the cycle. How to make the rear bar?

    From what I see, I'm afraid, this is not available in lollipop.

  • I have Windows Vista, can I use Microsoft Windows Office 2010

    I have Windows Vista, if I can use Mirsoft Windows Office 2010 is compatible with Windows Vista?

    Hello Irene 67,

    Here are the supported by Office 2010 operating sytems. Windows Vista SP1 is included.

    What operating systems are supported?

    To determine which operating systems would be financed for Office 2010, we have prioritized based on usage statistics for a given operating system, as well as design costs associated with ensuring compatibility and support of customer for this OS. The following tables summarize the OS for Office 2010 compatibility.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Limit the use of data on home network

    Hello

    I currently have three computers connected to a wifi modem with two computers running vista and a Mac SL running. I was wondering if it was possible to limit the daily use of computer data? I have experimented with the settings of the router/modem, but there is no built-in feature.

    Modem: 2701 HGV - W (bigpond)

    Any help would be fantastic.

    I have no idea on the SL Mac (you will need to post this question in a Mac forum or contact support Mac), but as far as Vista goes, certain limits can be defined in part by using parental controls and in part by using permissions (but it depends on exactly what you want to say that I am addressing the following).  No process will actually limit the use of network data (although they can help you to set other boundaries that can help).

    In Vista, here is the procedure for setting up restrictions. http://windows.microsoft.com/en-US/windows-vista/Set-up-Parental-Controls. Once you have access to parental controls, and then go to the section of deadlines and follow the instructions there (or for the other sections).  Technically, it's not a way to limit the use of data in itself - if by here you mean the amount of data accessed for a specified period (but you can limit the data that is used, what programs are available, what websites are allowed, when the computer can be used and several other things.  To limit the available data, you use permissions rather than Parental control, but well enough that is already treated as system implements security rights to prevent users other data and you can do this for any folder that you create outside profiles (while the file system are almost already protected - even on your part).  If you mean data over the Internet, then there is no way I know in Vista or IE which limit explicitly by the user.  Keep in mind that this will only work with standard user accounts as account administrator can simply replace the limitations or remove them all.  I know that's not what you asked really, but I thought that I should bring him as he is very much related.

    Now for the good news that you want can be done with the 3rd party software free.  See the following:http://www.ampercent.com/control-internet-data-usage/4572/.  This seems to be exactly what you want and should do the trick.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Use of data blackBerry Passport Standby mode

    Hello, I have a problem with the use of data from the idle mode on my passport for BlackBerry. IT uses the largest amount of data, more than any other about 650 mb in 8 days. When I enter the application manager and tap the Standby Mode it constantly shows in any case "no use of data during the last 48 hours" and the leeks of data... could you explain what happens?

    Probably, it is the synchronization of e-mail and other data for example, if you have a cloud service like box or dropbox sync to your device.

  • How to store/retrieve 'Date' using persistent data?

    Hello everyone - this is my first post on the BlackBerry Support Forums. I'm trying to provide a lot of relevant information as possible, but if I miss anytihng or I did not understand by asking what I want, please let me know.

    Background:

    I use Eclipse IDE ver 3.5.0 and BlackBerry Java plug-in for Eclipse 1.1. I build my application for BlackBerry JRE 5.0.0.

    Question:

    I want to save a "Date" field for persistent data so that I can recover and display in the format of Date once again (no chain). Here's a more detailed explanation.

    My application has three fields on the main screen. They are

    'Name' - AutoTextEditField

    "Gender" - ObjectChoiceField

    "Date of birth" - DateField

    Using persistent data to store the data entered into these fields, as described in the BlackBerry tutorials (http://na.blackberry.com/developers/resources/A13_Storing_Persistent_Data_V2.pdf), I am able to save and retrieve all of these areas, but only in 'Chain' format.

    Unfortunately, this won't work for me for the following reason.

    I create the Date of birth as follows

    "dateOfBirthField = new DateField (" BirthDate: ", System.currentTimeMillis (), DateField.DATE" ");"

    This creates an interface evolved for Date of birth, where the user can select and edit fields month, Date and year separately. When the user saves the information entered and wants to retirve it again, I want to display the date recorded in the same format so that the user can change again in exactly the same way as described above. But if I save it as a string, I can't fill in the field "Date" with the "chain" recovered. That is, I can't do something like

    dateOfBirthField.setDate (info.getElement (StoreInfo.DOB));

    Where "info.getElement (StoreInfo.DOB)" is similar to what is described in the tutorial.

    I searched the web for a possible solution, but never found any. All I found to date stored as a string and recovered just to see what was saved, but not for the changes resulting.

    Someone please let me know if what I am asking is possible. If Yes, can you please suggest a way to do it?

    Thanks in advance.

    Or it can store any object extra Long, no need to create garbage in chains.

    Long I = new Long (1234556);

    long x = i.longValue)

Maybe you are looking for

  • How to set all the same color curves

    Hello I have some data that I needed draw and want to draw all the curves of the same color.  Normally I just select each individual curve adjust settings, but there are more than 12,000 curves and the manual process would take forever. Any ideas?

  • Printer says its offline

    My printer is saying its offline.  I turned off & on, the wireless icon is turned on, as it is connected.  That is to say that it is "ready".  It worked yesterday.  I have a LaserJet Pro CM1410 Color MFP.  My internet works fine.  All of the suggesti

  • Cannot re - install XP Media Center Edition 2005

    I have a HP A1440N with a 250 GB HDD (original) I'd like to give to a friend.  I erased the hard drive for security reasons.  Now when I try to reinstall the operating system, during the installation process it is not the hard drive.  more wacky pres

  • Professional installation of Win7 on a U300s

    I am trying to install Windows 7 Professional on my U300s so that I can connect to my server from domain of work. When I hit the "Install now" button I get the message "a required CD/DVD drive device driver is missing."  Nothing don't seems to do hel

  • Toshiba Satellite - Touchpad zoom - how can I stop this?

    Hello I just got a new Toshiba Satellite (on Win 7) and have the same problem with the touchpad, change the zoom - I tried to follow the instructions above, but I don't have an option 'mouse' in "devices and printers"! Can someone help me please? Tha