Use of Internet reporting real-time bandwidth

Similar Questions

• Using FTPClient on a real time with system Exec.vi

  How can I tell FTPClient.exe address target when I start this executable with system Exec.vi in Labview?  I don't want to reinvent the file FTP utility used by MAX with targets in real time. I want to run this executable to a labview support utility without using MAX to do.

  Is this possible?

  Danny

  Thanks for the info.  Your "bad mood" response "suggests" a response to my question.  However, the full answer to my original question is that it is not possible to use FTPClient.exe outside MAX.  It is therefore not possible to spend in the address target at run time if the FTPClient.exe runs external to MAX.  FileZilla is a good choice - there are also other FTP clients out there, but you pointed out a solid choice.  Thank you.

• I want to use a chart of real-time-drawn arrow in Premiere Pro (a bit like the Tarantino style).

  I created a graph of arrow in After Effects, and I want to import into Premiere Pro to cover a precise shot to point AT something. The problem is, after I made the chart after affects and import it into Premiere Pro, the arrow is there but the graph also includes the solid square color background. I don't want the background. I want just the arrow, so that I can ask on a whim. How can I do?

  Thank you

  Jake

  Make some AE by using a codec that supports alpha channels.  I like Quicktime movies in the Animation or PNG codec for it.  RGB + Alpha, Millions of colors + and straight (i.e. NOT premultiplied).

  Use the rendering queue.  Do not export.

• The 1473R CAN be used with the real-time operating system of NOR?

  Hello, I am trying to determine if I can use the OR 1473R framegrabber PCIe FPGA in a PC based computer time real OS OR. Anyone know if this is possible? So I think that it should appear to the OS in real-time as a target FPGA that can transfer the data via DMA, but I wanted to make sure the drivers would work in real time of NEITHER.

  I appreciate any info on this!

  lukepike,

  Yes, you can use this device with real-time OS of NOR.

• Real-time execution trace toolkit to optimize the Labwindows/CVI code

  Hello

  I am trying to optimize a code in real-time in LabWindows/CVI by minimizing the time of each section of the code is taking and find bottlenecks in the code. I check this time using the real-time execution trace toolkit.

  However, I just found it seems to be a constant error when you use the tool of real-time execution trace.

  When I put the traceviewer 'start' and 'stop' right after the other, I get around shift schedule 9us. It seems that the CPU will in some "idle" after the start of the trace mode, or maybe it's the time of communication or something.

  I'd appreciate it if someone could give me an idea of why this is happening. The time of real-time application window is very limited and I'm trying to minimize the time as much as possible. Even the United States 9 error is difficult to resell.

  I used the following code:

  TraceConfigure (1, 1, 0, 25000, NULL);
  
  TraceStart ();
  
  TraceStopAndSend (HOST_ADDRESS);

  and there is a photo in the toolkit of real-time execution trace.

  Thank you.

  Generally, you might be better off picking off the clock at the beginning and end of what you want to track. RTETT my introduce overhead that becomes difficult to quantify... Which is what you probably already see. The debug mode will also implement a ton of overhead. Then... Destemming of the clock in release mode will probably give you you the best estimate.

• Toolkit of Real Time Execution Trace functional limitation on targets NI Linux real time taken in charge

  We want to start by using the Toolbox in real-time to backtrace of memory allocation profile on a target of cRIO 9035 & 9039.

  The product information (http://sine.ni.com/nips/cds/view/p/lang/nl/nid/209041) page has a note indicating that the Toolbox has limited functionality on real-time OR-Linux supported targets.

  However, I couldn't find any specific details about what are these limitations.

  If anyone can clarify which restrictions apply?

  Are there alternatives (party packages) that offer a feature more complete?

  Hello Jörn,

  Did some more research, the following limitationrs occur on targets LInux RTOS,

  -The Manager of memory when used on targets of Linux, saves only data for LabVIEW processes and threads, not the global memory of the systems.
  -Wait object are not recorded events
  -Trace buffer size cannot be changed
  -Timed loop pre-emption and reactivation of SRI events are not marked

  Hope that this information helps out you in addition,

  Kind regards

  -Natalia

  Technical sales engineer

• Near real-time source data recovery

  Hello

  I want to get the source data which is informix to target the Oracle using ODI in near real time.

  How can I implement it?

  Kind regards

  Mahesh

  It's here. Go step by step.

  https://docs.Oracle.com/GoldenGate/1212/Gg-Winux/GIINF/index.html

• Do we need the intermediate database if a single execution in real-time duplicate controls with the connector for Siebel Disqualification?

  Still confused:

  Do we need a staging database? We want only to perform real-time duplicate checks.

  Documentation (Guide to integration of Siebel, Oracle® Enterprise Data quality customer Data Service Pack, Version 9.0, April 2013) is not quite clear about this:

  "The staging database is used by the Siebel connector as a staging area for the transfer of data between Siebel and Disqualification when running batch through Data Quality Manager of Siebel." (p. 19)
  

  "The interface in real time of the Disqualification is also used for the batch cleaning tasks (normalization): Siebel sends each record selected for treatment to the Disqualification by batch cleaning web services." (p. 6)
  

  «Double the lot identification and quality of data health check jobs (either full or incremental batch) use interface batch Disqualification.» In this case, the candidate registers for correspondence or health checkups are written to the database shared staging, Disqualification executes a batch on these records and - if pairing - rewritten matches, Siebel picks up and uses to link together the records. "(p. 6)

  
  

  However, for a design it is necessary to plan in advance, if a database is required or not.

  Any suggestions?

  Hello

  The staging database is used only for temporary storage where the interface between Siebel and Disqualification batch is used. It is not necessary at all if only using the interface in real time. Note that some of the 'batch' in Siebel tasks actually use the interface in real time - this applies to all data in batch cleaning jobs in Siebel and also for the workflow "UCM lot" which is in fact orchestrated by calling web services Disqualification.

  In general, the batch interface is only used where Disqualification is attached to Siebel CRM (instead of UCM). Because DQ Siebel lots do not call survival (so that you can only link to potential duplicates together).

  Note that the tables key used for the selection of the candidates belong to the Siebel database in the form of standard tables (S_DQ_CON_KEY and S_DQ_ACC_KEY). They are not in the database shared staging. The staging database is used ONLY for the data transfer for treatment in batches. It seems that you are not intending to use this interface.

  Also note that Disqualification still needs its own repository database, but if you use only a Disqualification in real-time (and not, for example, by using a Disqualification to batch migrate data in Siebel using the interface of the EIM), it should probably not push the database this hard.

  Kind regards

  Mike

• Time reports real UCCX CUIC 9.0.1

  Hi, I have a problem with the import of reports in real time.

  Release notes state that the appropriate data source must be configured before import it templetes real-time report.

  Guide of the CUIC user says that historic UCCE and UCCE real-time data sources exist by default when the fresh install. However, in my case, there are only cuic and UCCX configured by default datasouces (UCCX to db_cra). Should I create a data source in time real UCCE? What user/database to use?

  I am running cuic in UCCX, not on the stand-alone server.

  Kind regards

  Davor

  You must create your report on a premium version of cuic, you can then export it and import it in CCX.

  Are you trying to create a kind of billboards? It comes to my lab system not a customer.

  

  If you import the attached zip file, you will be able to create this view. This reads the rtCSQssummary table, so be sure to enable it in "time real snapshot Config.

  Graham

• Real-time reporting

  Hello

  We use IPCCX 4.0 for CallDesk, and we want to show on a big screen of the Page of the Web of Reporting in real time. I just want to know if there is a way to access this Web page without being an administrator of the server IPCCx.

  Thanks for help

  Fabian

  Fabian,

  You can create a supervisor user and you need to access the http://ipccexpressmachine/AppSupervisor. Newspapers as a supervisor user you created and you could see a link to the static in real-time in the same way, as if you were an administrator.

  Hope this helps,

  Juan Luis

• MacAfee says real-time internet security disabled during access via Firefox.

  Although the Green OK of MacAfee sign illuminates when accessing e-mail in xplornet.ca via Firefox (my default), a message tells me that MacAfee real-time protection is disabled. By clicking on the button 'Activate' returns me seconds to red alert "off."

  This has happened

  Each time Firefox opened

  Hello Mark.

  Well maybe not related to your problem, I have to remind you that the version of Firefox you are using right now has been deleted and is no longer supported. In addition, he has known unpatched bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum security, stability, performance and ease of use. You can get it for free, as always, to getfirefox.com.

  What about your problems, you must contact McAfee support.

• My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapter or cable is needed?

  My daughter has an air of ipad and iphone 6 mounted on a tripod. She would like to use his phone to photograph/video while you watch on his ipad (in real time)... is it possible? If so, what adapters or cables are needed?

  Hello!

  Unfortunately, this feature is only available with the GoPro cameras.

  And Yes, if all cables already existing for these purposes, it would be kind of a pain to take pictures and do not shake the camera accidentally. Maybe, VSCO camera makers will make such feature in some time in the future. This idea is excellent and innovative. Maybe even Apple will listen to users and make their new iOS 10.

• Problem using USB-6356 on target in real time

  I try to use the NI USB-6356 on a SBC I converted to a target for LabVIEW RT. I created a LabVIEW RT project with the Architecture of Communication continuous model. However, when I select target RT > New > NOR-DAQmx channel, the wizard says "no device found support.

  Here's what I've done so far:

  1. Installed Support in real time on the host computer.
  2. Installed OR-DAQmx 15.5.1 on RT target (it is visible when I develop the 'software' under the lens of RT in MAX). See Fig1.png and Fig2.png.
  3. Verified that the NI USB-6356 appears in max under target RT > devices and Interfaces. See Fig3.png.

  Even if the NI USB-6356 appears in MAX, it seems suspicious that it appears as a USB device generic (like the keyboard and mouse that are connected to the target RT). Maybe it appears that way because it is connected to a goal of RT, but it seems that it is not recognized as a DAQmx device. I don't know how get the target RT to recognize as a device DAQmx, given that the appropriate drivers, etc are installed on the computer host and target RT.

  Thanks in advance for any help!

  Sorry to be the bearer of bad news, but the devices USB DAQ (other than the USB cDAQs) are not supported on PharLap targets at the moment. The documentation could certainly be clearer, so I'll update soon to reduce the confusion on this topic.  This white paper, last updated in 2014 is clearer than we currently have.  It is also explained in this KBQ5, but the wording is certainly a little bit clear here.

  I'm not sure of any other solution that exchanging your 6356 for cDAQ USB system, or the displacement of a BONE no - RT.

• Control of data using multiple thermocouples via indicators and the waveform in real-time

  I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform?  Thank you very much!

  PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!

  I see that you use the DAQ Assistant to create your task.  Now I understand why you may have about labelling.  It is easy of the seller NOR spiel booting...  But in any case, you already have a task to the MAX instead of use the DAQ Assistant?  The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties.  For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend.  Also, I don't know any property for this dynamic data type node, although I never use it either.  I suggest the setting up of your task and channels, Max if you'd give it a go.

  Since I thought I didn't really takes you all the way with you help, I wrote another one.  It uses a cluster, even if it's a bit barbaric.  I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.

• When I use the library function node call in real time, is loaded only once for all or load the DLL whenever it is called?

  When I use the library function node call in real time, is loaded only once for all or load the DLL every time when it is called?

  I have a critical application in real time, in which I use a piece of DLL function developed in C++.  It is ok?  Make sure any senior developer?

  Thank you in advance.

  The user interface thread is the thread that is used to update the user interface. It's slow. And it's supposed to be that way because humans are slow.

  The call library function node can be configured as this thread to use in the configuration for it dialog box. Please visit the LabVIEW documentation on how to do this.