Use of the disk is 100% when I have very little if all programs opens.

Similar Questions

• 100% use of the disk in the Task Manager when you use Photoshop CC (8.1-64-bit Windows)

  Hello

  I have been using Adobe CC for a month or two now. I have an Asus laptop with Intel Core i7 (2.4 GHz), 6 GB RAM, 1 TB hard disk space and 64 bit, almost 6 months old. Following apps are installed: Photoshop, Illustrator, InDesign, Audition, Acrobat Pro XI, Premiere Pro and Media Encoder. I recently did an update through Adobe CC for Photoshop and Illustrator, all the others are up to date.

  I think, but I could be wrong, since this update Photoshop is weird on my laptop. When I run Photoshop, my task manager immediately indicates a rate of 100% of my use of the disk. This seems to be off, after it is fully operational, but when I start to edit a file, the use of the disc immediately breaks back to 100%, while the CPU remains below 10%, RAM stays 3, 5-3, 8 GB (only 60% of total capacity) and even the actual read and write speeds of my HARD drive are not particularly high (5-10 MB max). And because of the use of the disk of 100%, Photoshop freezes in an instant and operating it is almost impossible.

  I already uninstalled Photoshop, passed all services and * that could trigger it in Windows 8.1 (Google search for: 8.1 Windows disk use 100%), re-installed Photoshop and I still have the same problem.

  So, I was wondering if there could be a solution to this problem or if anyone else has this problem as well?

  Thanks in advance!

  UPDATE: this error only applies when trying to manipulate, add, change or delete the text. All other functions (unrelated to the text) seem to work fine.

  Check out this help file: troubleshooting fonts | CS6 2014 CC, CC, Photoshop, CS5

  You can also try resetting Photoshop preferences and increasing the amount of ram available to Photoshop, if troubleshooting doesn't help.

• Windows 8 guard slows to grip and 100% use of the disk.

  original title: upgrade to WINDOWS 8 PRO - system crashes - no Resposnive

  I had recently upgraded family basic form win7 Windows pro. My laptop does is VPCEH15EN from Sony. By Download Upgrade Assistant I had updated. The 1st time, my system became dead slow. After reboot, I found that my use of the disk is 100% all the time. With very little knowledge I had killed some of the background process that I know (and also a few random apps) use of disck came dowm. Here begins another problem. Am not able to uninstall, open Task Manager, change some settings etc... Can help. I have 8 GB of ram, processor i3, 64-bit

  Hello

  I had this same problem, my computer laptop lenovo would remain idle for about 15 minutes, then go back, 100% use of the drive, but not the tag to any process.

  It was a scheduled defragmentation task.

  Task Scheduler open-> Microsoft-> Windows-> Defrag

  Disable or delete the task.

  Hope this helps someone else.

  I thought it was drive problem hard as the computer would be useless without restart using the power button.

• HP 15 Notebook PC TS: Freezing, blue screens and 100% use of the disk.

  I constantly freeze because of my pc is always 100% use of the disk. Due to the use of disk, it causes my laptop to a blue screen, I received the following information from the configuration of the system errors: Bad, kernal error in the data on the page, out of State driver. When the 100% disk usage, I use about 1 mb of space.
  I use a wireless internet connection.
   
  Before these problems have taken place that I had upgraded to windows 10, shortly after the use of disc started to go up more often eventually cause my laptop to blue screen. With the bsod, it says that my operating system could not be found, so I had to go back to windows 8 through factory reset. With my first boot on my factory reset, I was still having the same problem as before, but since then my errors and problems continue to increase.
  I hope to diagnose my problem and get help before it's too late.

  Hi Zinchy,

  Thank you for the update. Yes, you can run a test lying on the hard drive from the BIOS. Here is a link to guide you.  HP Notebook PC - hardware failures (10, 8 Windows) screening  If the hard drive test OK, I'll try the clean install of Windows 10. Please hold me.

• Change the disks used in the disks of OCR/vote DiskGroup

  Hello

  RDBMS...: 11.2.0.4

  ... OS: AIX 7.1

  In our environment, we have a diskgroup used to store records OCR and voting. The diskgroup contains 3 discs 15 GB each and is configured with normal redundancy and is called "OCR".

  My question is: We must change these 3 discs with 3 new disks to a different memory. I would like to know if it is possible to add these new 3 drives in the diskgroup OCR, wait for rebalancing and after this operation, remove the old records? This approach is viable? Or we need to create a new diskgroup, place the OCR and the discs with right to vote in this new diskgroup and remove the old diskgroup?

  Thanks in advance.

  You can add and remove asmdisk by using the procedure in the DSO without problem, make sure just as there are enough failgroup to contain the votedisk.

  OCR and ASMSPFILE connection:

  The OCR and the ASMSPFILE are stored similar to how Oracle database files are stored. Scopes are spread across all disks in the diskgroup and redundancy (which is the measurement scale) is based on the redundancy of the disk group. When you add and remove some asmdisk these extensions are moved automatically during the rebalancing process.

  No relocation is necessary for OCR to ASM SPFILE.

  VOTEDISK topic:

  The VOTEDISK is not stored as OCR, each VOTEDISK (one per ASMDISK) are placed directly on the ASMDISK (near LUN header) then is necessary relocation Votedisk.

  Suppose you have 3 asmdisk each own FAILGROUP disc (A, B and C) and you add more ASMDISK 3.

  So if you use a normal redundancy, you need to configure at least 3 new failgroup (a failgroup for each new ASMDISK).

  When you issue "Alter diskgroup xx drop... drive A, B and C" the clusterware start automatic resettlement treat mobile votedisk to disks on failgroup D, E and F.

  You will see the process on the alert_log of ASM and cssd.log.

  After finishing process of rebalancing, check if they fall on disk have a status of 'TRAIN' and there is no votedisk thereon ($ crsctl query css votedisk).

• Comparing the use of the data store for the use of the disk on the server virtual computer: Match is not

  I'm a bit confused and could use clarification of a person.

  I'm looking to a virtual machine through the vSphere Client and it has an alert telling me that my free space data store is low. 17.55 free GB of 134,75 GB total capacity. I'm running ESX 4.0 for the host and my VM running Server 2008.

  I'm confused because when I connect to the virtual computer and check the use of disk in my computer, it does not reflect what vSphere tells me. This particlular VM is little used and the use of the disk under windows is very very low. About 20 GB.

  Can someone tell me why these numbers are not matching? I have other virtual machines that are in the same situation.

  Thank you

  Blake

  I think that you may be mixing two things up, the vSphere client will only warn about the data store, the VMFS volume, you have created and presented to ESX. You then create a VMDK file for your Virtual Machine to use. If you assign more than 80% of your data store to a VMDK or several VMDK then the customer will report a warning on its use. WARNING 80% 90% critical even if inside each VMDK file you may be using only a couple of GB.

  If you give a little more detail on the virtual machine and the data store, we should be able to get out.

  Hope this helps,

  Dan

• Properties on my records show that about 25 GB, but when I check the properties on the disk C it says I have 103 GB

  Properties on my records show that about 25 GB, but when I check the properties on the disk C it says I have 103 GB. Are these files was hiding all? and how do I know if I can delete them or when they are?

  My computer is running out of disk space, and I want to delete some files, so the computer longer smooth but I can not find about 80 GB which is supposed to be on my computer.

  Very likely. This includes your Hibernate file, if there is one, your pagefile, and (I think) the Restore Points.

  You have a single hard drive? If so, how much is spread over it? If only a C: partition, how big is it and how much space you have?

  Deleting files (unless the hard drive is almost completely filled) won't help your performance. After the back if you need advice.

• I have a DAQ Assistant configured to read several channels at the same time. When I have a graphical indicator of wire to the output, I see all my signals mixed together. How I divided them into separate signals?

  I have a DAQ Assistant configured to read 2 channels at the same time. When I have a graphical indicator of wire to the output, I see 2 signals mixed together. How I divided them into separate signals?

  When I wire any type of indicator, it is show that a release of a single channel.

  I want 2 indicators showing 2 different signals as expected from 2 channels configured. How to do this?

  I tried to use split signal but it end by showing that 1 out of 1 signal two indicators.

  Thanks in advance.

  Yes you are right. I tried, but I don't have the result.

  I just find the path. When we launch the split signal, we should expand it (split signal icon) by top, not the bottom. It took me a while to understand this.

  Thank you

• Windows xp Home Edition running, at the center of the screen it is large icon for media player. in all programs used. Cannot delete, removing appears again at startup. any suggestions?

  Windows xp Home Edition running, at the center of the screen it is large icon for media player. in all programs used.  Cannot delete, removing appears again at startup. any suggestions?

  Hi louMIRANTI,

  ·         Since when are you facing this problem?

  ·         Remember to make changes?

  ·         This problem occurs on other user accounts?

  ·         How to remove the icon?

  Method 1: Check the question on other user accounts and see if the problem exists.

  Method 2: Let's try to run a scan online for any infection on the computer.

  Malicious software removal tool | Protect your computer

• I don't want the address to show when I have 10 or 12 Pushpins on my card, Microsoft Streets & Trips

  Original title:

  Location information on the Pushpins

  I have Microsoft Streets & Trips 19.00.17.3000 and when I search for an address, it creates a marker with the address in the part information of the bubble.  I don't want the address to show when I have 10 or 12 Pushpins on my card, but when I only shows the name that it's hard to see them in the context of the card.  I want to have the bubble with only the name, but I can not remove the address from the part of detail of the bubble.  My friend has an older version of S & T, and when he sends me cards I can edit the Pushpins to delete location info.  With my version, is there a setting or a work around that?  It's a lot of your time to remove each pin and manually put blank benchmarks in their place.

  Hello

  For the best assistance would you repost kindly to Highway and street maps, Forum of MapPoint:

  http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips

  See you soon.

• Years, I used iPhoto to edit my images-Lighten/Darken, sharpness, contrast, highlights/shadows points. Now since I upgraded to OS x 10.11, pictures replaced iPhoto. Photos seems to have very little editing tools. What options now? Lightroom?

  For years, I used iPhoto to edit my image - sharpness, contrast, highlights/shadows, Lighten/Darken points. Since the update to OSX 10.11, iPhoto has disappeared, replaced by pictures, which seems to have very little editing tools. I am disgusted. What are the options should I now? A friend suggested using Adobe Lightroom.

  Use the Extensions:

  Read here: Edit your photos using third-party extensions in Photos for OS X - Apple support

  Search Photo extensions on the Mac App Store

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• All programs open in the small window

  Original title: ask the community

  Windows 8.  All programs open in a small window. How to vary the size of this window, or alternatively, to have the new window opens automatically full size?

  Thank you

  Hi Matt

  Yes, I have had this problem since I bought the computer.

  However, I tried your suggestion and, guess what, IT WORKED!

  I am so happy.  Thanks for your help. Something so simple but if you don't know what to try then it can be so frustrating.

  Incidentally (and this is not a complaint) by clicking on desktop icons now open full-screen windows, which suits me very well, but when I hit the screen button "reduced" on a window then all windows to open in reduced format, but ALL are EVEN smaller.  I'll play a little more but thanks again. You have made my day.

  Wade (7wombat7)

• I have trouble to get past step 1 in Lightroom getting up and running. Have spent the last 5 hours on it and very little hair left. Anyone out there to help?

  I have trouble to get past step 1 in Lightroom getting up and running. Have spent the last 5 hours on it and very little hair left. Anyone out there to help?

  Hi Craigb89524984,

  I saw your Adobe ID (email address) you used to post here on the forums and found that a subscription to creative photography Cloud inscribed on it.

  We will be happy to help you, but before that, there are a few information such as:

  What is the exact error code/message, if you found one? Please attach a screenshot. See, FAQ: how to capture and after a video screen or blow?

  What operating system you are using with his version?

  Until then, check out the links below:

  Download and install Adobe Lightroom CC

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Troubleshoot Adobe Creative cloud download, install and update questions

  You can also analyze the log files to find out the root cause of the problem: Troubleshooting Adobe Creative Cloud install problems with log files

• I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  Download and install it manually. Click HERE download Service Pack 3. Save the file to your desktop. Double-click the file and follow the prompts to install. Make sure that you disable security software like antivirus scanners or spyware before you run the file sp3.