Use Oracle database with LabVIEW

Similar Questions

• Using Oracle database for thesis software

  Hello, I want to use Oracle Database Enterprise Edition and Oracle Data Mining for my master's thesis, and maybe we can publish a book of science in the end. I already downloaded the database and work on it, but I need to know if it is OK to use the software free of charge during the preparation of my thesis. Is that what I should pay or should I inform Oracle about this? I don't know anything about using Oracle products for research projects. Any information you provide will be appreciated. Thanks, Hatice

  You must purchase a license for Oracle Personal Edition, which is the set of US $92 for a year. It includes the Advanced Analytics option, which is where your data mining.

• can I use "Oracle Database 12 c: performance management and Tuning" training for the certification "Oracle Database 11g: Performance Tuning 1Z0-054 '"»

  I took "Oracle Database 12 c: new performance management and Tuning" the oracle University training. Now I would like to get certified on "Oracle Database 11g: Performance Tuning 1Z0-054 ' exam. Is this possible?

  I guess you ask if you can use the course 12 c as long as the condition of course for the review of 11g.  Over 12 c is not listed as one of the options for the 11 g certification and course requirements are normally specific version - at least with DBA certifications.  If you are already an Oracle OCP DBA, of course, there is no requirement of course for the review of performance tuning.  From what I know the training requirements for other certifications, I do not that you will be able to use it. However, Brandye will provide a definitive answer to whether the course 12 c would be acceptable for 11g certification.

  That said, I'm with John - 12 c review is about a community of 85 to 90% in the review of the 11g and is currently about 20% of the price while it is in beta.  What is the point of trying to cross the releases?

• Source a current Sine using USRP N210 with Labview

  Hello

  I use USRP N210 with boards LFTX/RX for communication (electromagnetic Induction) cable and programming using LabVIEW and downloaded the drivers. I need to order the USRP to send a signal sine of 1 MHz through the barbed wire. I used the "Sine simulation block", but I'm not sure the block to which it must be connected to. Please let me know the steps or the blocks/screws that can be useful.

  Thank you.

  Hi Julie,.

  I think you need to use the open niusrp and log screw

  You don't need to use the configuration VI signal because I think that you can not set the frequency of the carrier on the Remora LFTX and LFRX.

  I think you can use the sinus blocks of generation as shown in the picture as an attachment.

  Thank you.

• Using ComponentOne c1chart with Labview

  Someone of experience using the C1Chart (or a 3-d chart) of ComponentOne with LabView?  Background: we have a c# dll that contains a control to the user with a C1Chart placed on it and a lot of wrapper code to make the C1Chart data color of LAB plot.  We create this dll and then use it in LabView.  We place our LABORATORY chart in a container .net in Labview.  Here's the problem with the C1Chart version

  2.0.20091.19053 it worked great and when we went to version 2.0.20092.19168, that today ' today, we get the horse C1 screen, saying: we use a C1Chart evaluation version when we run the vi.

  Any thoughts? I use version 8.6

  A component has corrected this problem and it will be integrated in the version official 2010v1.  In the meantime if you need solution you ask the C1 for the middle generation 2.0.20093.19356 or higher.

  Also, here's their describtion of the question. Perhaps NEITHER can reivew to see if there are effects for LabView.

  * License code passed under 19053 at 19152.

  * An old license code class (C1. Win.ProviderInfo) LicenseProvider puffiness. The new
  code doesn't have any class that inherits from LicenseProvider. In addition, the
  LicenseProviderAttribute() does not specify a license provider.

  * The only way that the MS IDE might find there is a license, and what is the license would
  because our controls call LicenseContext.SetSavedLicenseKey (). Apparently this is not enough for LabView. He must
  be looking for the System.ComponentModel.LicenseProvider () and using the virtual memory LicenseProvider.GetLicense)
  obtain the license key.

• Cloning of Oracle database with RMAN

  Hello dear colleagues,

  I intend to clone my PROD database to create a database of emergency with RMAN, the situation in the present case, it is that I want to use the same db_name so create spfile scp to the target server, run a level 0 backup dB, create the same file structure as well, but I'm confused because when I connect to RMAN to perform cloning as you can see...

  RMAN> connect auxiliary /
  connected to auxiliary database: prod1 (not mounted)
  
  RMAN> connect target sys/passprod1@prod1_ORI
  connected to target database: PROD1 (DBID=somenumber)
  

  RMAN> run {
  allocate auxiliary channel c1 device type disk;
  allocate channel c2 device type disk;
  duplicate target database to 'prod1';
  }
  

  -Is it possible that crushes my source PROD1 database

  -C' is ok, if I run the clone with the database of the source open with few users working? Even he will operate a backup, this will obviously have a performance impact but also the integrity of the data? I'm not sure what other files of this procedure will be used in clonning.

  -Should I enter into channel c2 backup full path to the source server?

  I enjoy any help and thanks in advance.

  Documentation:

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmdupdb.htm#i1008564

  Backup the basic replication does not require the same password (file)

  If duplication to a host remote and demanding that the same file names and paths created, then integrate the NOFILENAMECHECK.

  Hemant K Collette

• Installation 11.1.2.1 using oracle database in windows server 2003 64-bit

  Hi gurus,
  
  I am about to install hyperion version 11.1.2.1 with oracle on a windows 2003 64-bit database.
  
  Do I need IIS component for hyperion to install?
  
  Thanks in advance

  Hello
  IIS is required only if you install epma, fdm, and/or hfm to the server.

  See you soon,.
  Alp

• Send SMS using Oracle database automatically

  Hi all:
  
  I want to send SMS from Oracle 9i automatically database. What reg software. can I use?

  Hello

  Here's the Oracle Forms forum.
  You would have more chance of getting the answers by posting in the forum database ; D

  François

• Problem with the configuration to use Silver Style with labview 2011 (32-bit)

  Hi my friends.

  I installed labview 2011 32 bits. I select money style my default control style. but when I create the new VI, labview creates no controls in the silver model

  the controls are created in modern style.

  can someone help me solve this problem?

  with all my thanks: Saeid

  If you're down by controls via the palette, then it will drop any type palette you are in.  You are most likely in the range of modern control.  The setting that you are talking about is when you create a command or the indicator by right-clicking on a primitive terminal.

• How to down load and use OpenStreetMap offline with LabVIEW 2013

  Dear all

  How can I download the OpenStreetMap database and API for LabVIEW call this map offline database!

  Thank you

  Luong.Tran

  Thank you!

• Using gateway requirements with LabVIEW classes

  Does anyone know how to get the gateway requirements NOR read the coverage information of documentation contained in a class of LabVIEW (.lvclass)?

  Requirements gateway seems to load the content of the fine documentation of screws, controls, .llb, .lvlib, .lvproj etc., but not .lvclass? My LabVIEW crash out when I try to bridge point requirements to a project with .lvclass files!

  If this cannot be done then it is a great way to add coverage of the needs information (you know, the field "covers: ID") in the properties of the class, or something close to class perhaps, this gateway requirements can read?

  Thoric-

  I believe that gateway requirements should be able to trace of LabVIEW Classes also covers long classes are added to a LabVIEW project and requirements gateway is configured in order to study the LabVIEW project. Here is a very primitive example that I restored from files in the directories of the prescriptions and example LabVIEW gateway.

  I hope this helps.

• Using Oracle with Microsoft Active Directory database

  Hello
  Because of too many nodes, we have in our company communicate each other (using the old files tnsnames.ora), we are now in the time to find a central location to store our net service names.
  I know that we can use for this OID to store the names of Service Net, but my question is it possible to use Microsoft AD, because our infrastructure using Microsoft AD as a central point.
  I have read the documentation oracle Oracle® Database Platform Guide (Chapter 12 Using Oracle Database with Microsoft Active Directory), but the problem is what happens if my database is not on the Windows operating system (such as Unix/Linux, we have number of it).
  I also read the document Oracle® Database Net Services Administrator's Guide (Chapter 3 Configuration Management Concepts) where you will find statement on the end of the chapter:
  Oracle supports Microsoft Active Directory only on Windows operating systems. Therefore, the client computers and the database server must also run on the Windows operating systems to access or create entries in Microsoft Active Directory.
  
  From this text, it looks like that my only option in this different environment with multiple operating systems is the OID (I wish it isn't true).
  
  Thank you

  Dragan,

  Sorry for the late reply. Since once it has clearly mentioned in the white paper that IO is a must; If you want to use MS AD, because 'oracle white paper' means 'documentation' refined and very authenticated.

  Enter the information useful/correct and close the debate.

  Concerning
  Girish Sharma

• can I create an EM 12 c database with the preconfigured repository database use, models on the basis of data Oracle 12 c

  The installation for EM 12 c document indicates "Install Oracle Database 11 g Release 2 (11.2.0.3) software on the host computer, where you want to create the database".  I want to use Oracle database 12 c.  Is there a template to preconfigure the repository on a database of 12 c?  Or is there a work around?

  For the version EM Cloud control 12.1.0.5, which is the most recent version of the MA, the models for the 12.1.0.2 of the database version is available here.

  Model of data base for the installation of Oracle Enterprise Manager Cloud control 12 c Release 5 (12.1.0.5)

  Note that, although a DB template helps you to simplify the installation process, you can always install EM12c without one. If necessary, look at the manual below:

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/install_em_exist_db.htm#EMBSC159

  Kind regards

  -Loc

• two node Oracle RAC with two Oracle databases completely different on each node?

  We currently have two different applications that use Oracle databases.  Current configuration is two different oracle homes dbhome_1, dbhome2 with separate mounting LINUX points containing the Oracle homes and *.dbf files on a single host server.

  Previously, the idea was to set up a second server identical host configured as a 'data guard' for both of these databases.  Now, management wants to implement a cluster of CARS of two nodes, with each node running two databases.  With the Standard edition.

  I only did CARS of high availability and scalability for a single database.  Is it possible to run two completely different databases Oracle on a two-node RAC cluster?  I am inclined to think that they it has divided into

  two clusters RAC to two nodes on four small servers host.  Any suggestions or comments would be appreciated?

  Is it possible to run two completely different databases Oracle on a two-node RAC cluster?

  The short answer is Yes... it is possible.  It will work without any problem, as long as you have the resources available to an additional database.

  I am inclined to think that they it has divided into two clusters RAC to two nodes on four small servers host.

  There is another option.  In the past I have two databases on a RAC cluster that has been implemented for reasons of cost of license / (I don't think that this applies to itself, but you will need to check).

  However having seen on separate hosts that you have only potentially interruptions of service on a database if you decide to do something like upgrading from one of the databases and thus upgrade the GI as well.  This would mean interruptions in service for all your databases using the GI.

• Oracle Database Express Edition used in a stand-alone database

  I have developed databases for years in access. I had a lot of people want me to databases for them. I don't want to make databases in access and then have to worry about sending a database to a different State and then find out that the user has a different version of access installed and it does not work properly.
  
  Can I use Oracle database Express edition to create a database with a front end that I can send to others and they can install on their computer and run it? Or do need to install the full Oracle Express? In other words, is there like a version of the Runtime?

  user13756579 wrote:
  I saw that you had to install twice last night, messed up my password. The only thing that that worries me is the database always current running on the user's computer, when well even that they could not use the database for months at a time. These databases are of small databases to keep the data of the members of the group. That is to say. name, address, phone number, personal information and perhaps a scanned document or two.

  I have looked at other database programs, but won't put a lot of money if I could develop only 3-5 small databases annually.

  You can develop your application in such a manner, that it will start service Oracle XE and stop it at the exit. Set the service to start manually. That's all.