Use other media space and alternative

Similar Questions

• Unable to sync music using Windows Media Center and Windows Media Player will not open

  Media Center will not sync music!

  I recently opened Media Center and I had no music in the library. I have constantly played music from the library so I didn't know what is happening. When I try installing the library again once it tells me that a necessary component for Windows Media Center is not available. I have not changed or downloaded something different. I went to check if Windows media Player is the multimedia file sharing. The message I get from that is, basically, that something is missing.  Now my Windows Media Player is not even opened. I wonder if my Zune Player (80 GB) has nothing to do with the problem. I charge my player when this has happened, but I do this all the time so I am at a loss. I went to the page "problem reports and Solution." It is the symbol of the Media Center window and says that the problem is caused by Windows. The solution is to update to windows; which I am fully updated. I tried to restore the system to an earlier date, but that doesn't work anymore. I'm at a loss to know what being of any help would be appreciated.

  As a side note video playback, TV and photos also works very well in Media Center.

  Thank you

  Shay

  Thank you, Shay

  Hi Shay,

  You can try the following steps and check the result:

  Step 1: Run the sfc scan to repair system files missing and corrupt.

  a. Click Start, click programs, accessories principally made, right click Guest and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  b. type the following command and press ENTER: sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information, visit this link:http://support.microsoft.com/kb/929833

  If the problem persists, try the reconstruction of the library:

  Step 2: Library rebuild Windows media player.

  This problem can also occur if the library is corrupted. Rebuild the library and check if this solves the problem.

  Follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note: You don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  You can also view the following green button and check if it helps:

  http://thegreenbutton.com/forums/t/38766.aspx

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I just posted a long question about recording on an Iomega Screenplay Director using the media library and the content is not visible when I try to watch on my TV. The question seems to have disappeared.

  The idea was to load an Iomega 2 TB disk with lots of movies to the computer by using the Media Center tuner. and then connect the Iomega to the TV and watch the movies at my ease. Unfortunately it does everything just

  Hello

  I suggest you to contact IOMega to improve assistance in this regard.

• Can I use Virgin Media email and gandi mail net on same Thunderbird set up?

  Having problem for Thunderbird at the second address Virgin Media email see (new) and webmail not much better. If I create a Gandi net account will both my V Media address 1 and new address Gandi be available the same Thunderbird set up?

  Regards, Phil

  I fear for you that if webmail of problems, normal email might be not the best (and could do a lot worse!) You have a particularly slow or intermittent connection?

  This isn't a bad price and it's a little less to pay for my. org.uk domain and its accounts. But then my provider is in the United Kingdom and I am in terms of name with exceptionally competent technicians they employ.

• How can I use other companion DAQmax and data acquisition in labview code?

  Hello

  I'm new in labview and want to combine four different codes of labview and run them at the same time.

  I use my data acquisition PCI-6071E and BNC-2120. I want to send an analog output (flat DC signal) to control a blower, an analog volmetre to a (DC) output pressure transducer, also receive data from a pressure sensor and hot wire probe.

  I wrote four different VI for each of them (using DAQmax to output analog and DAQ assistant for analog inputs) and each of them works well, but when I want to use them together they do not work.

  Anyone know how to make them work together?

  Thank you

  Pooya

  To the DAQ Assistant, simply follow the instructions for the selection of multiple channels when you create (where he says quite clearly,' ' or to select multiple channels "). If already created, open the DAQ Assistant and click on "Add channels" at the top of the page.

  When you use a physical channel name, you simply click on browse instead of a single channel. Use the same or for multiple channels.

• Why the Firefox on Android is so great? It uses 20-60 MB and fills the volume? (App: 24MB.) Data: 30 MB +)

  Summary:

  Firefox using too much space on my Android phone, and this causes problems on my phone for example errors "Low on space". Android applications are unable to obtain updates to security due to the use of the high area of Firefox, which is a security problem.

  Why Firefox uses as much space and how to prevent or solve this problem?

  Details:

  I am running Firefox on Android 2.3.4 18.0. I then Firefox my 8 GB SD card. This problem also occurs well in Firefox 19 & 20 of Firefox.

  Firefox uses a huge amount of space. This is the largest app on my phone by a long shot. It seems that Firefox will grow without limits, until what it triggers a "low on space" warning on the Android device. When this "low on space" warning is reached, Firefox becomes unstable and I'm unable to install other Android applications. Often applications cannot be updated due to high usage space of Firefox and cannot receive updates of security which is a security problem.

  Please see the following screenshot that shows that Firefox uses about 30 MB worth of space and is approximately two times larger than the next largest app, Google Maps.

  https://www.dropbox.com/sh/7di3oh1p98bh68v/AoxNuqMKd4/2013.01.20-16.17.40.JPEG

  If I go into ' settings: Applications: storage use: Firefox ", Android tells me that Firefox uses the following amount of space:

     Storage:
     Total: 29.60Mb
     Application: 1.85MB
     Data: 27.76MB
  

     Cache: 0.00B
  

  When Firefox is freshly installed, the "Total:" use is closer to 3MB. But in the coming days, this number increases to 30 MB.

  Why Firefox uses as much space and how to prevent or solve this problem?

  Thanks for pointing the "browser.cache.disk.parent_directory" option I understand the implications of privacy to store the cache outside the profile directory, but I don't have much choice. Firefox as an App has increased slightly with the latest version (8 MB to a value of policies) and my phone was so full that the system was not the application updates to security for other applications. I have that is need to get this resolved the problems of disk space or I will stop using Firefox.

  I did it for free space:

  1. Create a new folder on my SD card ("/ mnt/sdcard/something /")
  2. Under ' subject: config' set browser.cache.disk.parent_directory to match the new directory created previously.
  3. Restart Firefox (I had to kill the Firefox application)
  4. Went to a few sites such as Facebook and Pinterest cache-heavy
  5. Checked the cache didn't work under ' subject: cache'
  6. Remove old files from the cache in my foo.profile/Cache Directory
  7. Went to "subject: config' and came back some of my manual settings that it took months to save disk space."

  Now Firefox uses 10 MB less space on the memory of my system, then he has done it before. I can also make the larger cache (much larger) which will speed up the display of Web pages.

  I couldn't create a symbolic link from my old Cache Directory to the new directory of Cache.

  More info about "browser.cache.disk.parent_directory" can be found at http://kb.mozillazine.org/Browser.cache.disk.parent_directory

• Windows Media Player and a 5.1 Surround sound

  I recently bought a Dell Inspiron 660 and I use the speaker system, I had with my old computer - a set of very good quality Sony 5.1 Surround Sound speakers.

  I tested the speakers under sound settings - all speakers are appearing in the work. I also played music using Nero media player and Media Player Classic - everything works fine.

  However, whenever I try to play music in Windows Media Player - the only sound from two speakers?

  I'm confused here - I know that the speakers work, as evidenced by the sound test and the fact that they work with other media players, then why they won't work with Windows Media Player. Have you tried a few "fix - its" Microsoft - nothing has worked so far.

  I use Windows 7 (even on my old computer - incidentally where the media player worked well) and equipped with K-Lite codec pack.

  Anyone has any ideas - I use Windows Media Player the most and have all my songs stored there, so it's going to be a real pain if I can't use it and it's my favorite player, but it's just annoying and frustrating.

  Thanks for any help you can offer.

  Try this.

  -Go to the control panel
  -Find the icon of speakers
  -On the devices tab of reading, find your set of speakers and click Properties
  -Click on the enhancements tab
  -Check the box "Speaker Fill".
  -Click OK.

• WinSxS swallow all my server storage space and fill C:Drives causing unstable Windows

  Hey there, I got a small cut of data center where we have virtualized 10.  Which most is Server 2008 standard with 4 x x64Bit version.

  I thought about creating a 75GB C partition would be more than enough space.  After about 9 months of use of torque with a 64 bit OS and Exchange 2010, I was up to 5 GB space on my C drive.  Fortunately, I had a load of spare to park my Exchange .edb files to remedy the problem of the lack of storage SAN.

  What MS is going to deal with this problem.  I'm lucky, I can just use extra storage space and make a difference.  What of those who pay for hosted solutions / storage.  This eventually cost them much more they may have planned to even if they copy actually that much data on the server.

  Surely MS will come out as its eems to be a cleaning tool or a patch to stop this issue more and more out of control.  Nobody seems to have a decent solution for this.  Woe to anyone brave enough to just go and delete files to free up space.

  Any ideas or advice greatly appreciated.

  Looking forward to hear from you.

  Glyn.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Note: your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on area issues, to do that please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Get the error add snddvol32exe when editing video using Cyberlink Media 8

  Original title: snddvol32exe

  I use Cyberlink Media 8 and edit a video when I want to add voiceoover I click on the MIC icon and go to choose he said add sndvoll32

  Hello Brian 456,.

  Thank you for the question!

  It is disheartening to know that have problems you with a video montage. As I get it right you get an error Add sndvoll32 when you edit video using Cyberlink Media 8

  I need to ask you some questions to help you best.

  1. what you trying to do?

  2. What is the exact error message associated with snddvol32exe?

  Reply with answers to help you in a better way.

• Installed more recent Flash Player, message "an error has occurred" on most of the Youtube videos and other media does not

  After you have installed the latest version of Flash Player, on the YouTube videos, I try to read the message "an error has occurred. Please try again later. "appears. In addition, on sites like Tumblr other media, such as audio and videos uploaded, play not at all - it's just a white space where it should be. This set works fine in Chrome.
  I have tried everything I can think of - I deleted the cache and deleted cookies, updated all plug-ins, uninstalled and reinstalled Flash and Firefox, disabled Ad-Block, he ran in Safe Mode and navigation private, restarted my laptop a couple of times - but none of this has worked.

  Try turning off protected in Flash drive mode.

  See:

  • [929081/questions/929081]
  • [/questions/928820 #answer - 340046]

• Why a song I downloaded get classified as 'other media' instead of music, and how it moves it?

  New to music downloading but I am confused as to why one of the 12 songs I downloaded is not recognized as music from Windows Media Player or 'Music' on the stage of Dell. WMP it categorizes as "other media". Dell Stage just does not display it at all. Amazon Cloud, itunes, Spotify and all make them, if. It seems to be the same as other categoriezed records (if I moved it to try to solve the problem in the past). He said: it is located in the

  C:\Users\...\Music\iTunes\iTunes Media\Music\Compilations\Cars\03 life is a Highway.m4a

  where as another song downloaded on the same time is the same

  C:\Users\...\Music\iTunes\iTunes Media\Music\Blake Shelton\Red River Blue (Version Deluxe) \03 God gave me You.m4a

  It would be nice to be able to move files between 'Music' and 'Other media' autour anyway since he is identified as music number of non-music items such as CD of the Bible and podcasts. Any suggestions?

  Thank you

  ADD: If it is a cause or an effect I don't know, but I find that all files in the media 'other' tab when clicked says under 'Properties' in the 'Media usage rights' tab ' this file is missing use rights.» Each file checked in the "Music" tab, said simply "this file is not protected." This is true even for a CD I downloaded twice, once with WMP, then later in iTunes when AmazonCloud couldn't accept version WMP (sick real of compatibility here.); Download WMP appeared under 'Music', but the download of iTunes put copies second under 'Other media'.

  Thanks for posting the info. It seems to be just an MPEG-4 AAC audio file normal (so not ALAC). I am not sure yet why WMP this qualifies other media.

  If you try to add the song to the library, which helps? To add the song, right click, select delete - delete from library only - OK. Then, go to Tools - Advanced Options and select restore deleted library items (press Ctrl + M, if you don't see the Tools menu).

• distortion sound when using the media player but not any other media suite e.g., be able to go

  I have a new samsung 305th and sound playback for the media player is distorted on the helmet and built in speaker, but all the others like suite of media and power go her crystal clear. makes all kinds of settings and checked sound card, what is the problem? Fix, it has found a problem but says to contact the manufacturer.

  Hello

  1. what fixit did you run?
  2 were there any hardware or software changes made on the computer before this problem?

  Carry out the methods to solve the problem.

  Method 1
  Run the troubleshooting windows media player setting and check if the problem persists. Follow the steps described in the following link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

   

  Method 2

  Try disabling audio enhancements and check if that helps.

  (a) open her by clicking the Start button, then Control Panel. In the search box, type sound, and then click sound.

  (b) on the playback tab, click speakers, and then click Properties.

  (c) click the enhancements tab, and then select the checkbox disable all improvements .

  If you do not see the enhancements tab in the speakers properties dialog box, these features are not available for your speakers, and this procedure is not applicable to your computer.

  If disabling audio enhancements solves the audio problem you are having, this indicates usually that your audio driver needs to be updated.

  Also remove the audio codec in Windows Media Player.

  (a) open windows media player, and then press Alt key.

  (b) click on Tools, select plug-in and click on the option.

  (c) select plug-ins tab, and then under category, click Audio DSP.

  (d), select all the files in the DSP Audio box and click Remove.

   

  Method 3: Check if the problem persists in the boot.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  See the help article
  Tips for solving common audio problems.
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Let us know the status of the issue.

• held space and moving a canvas too moves the other canvas. How can he fix it?

  My colleague uses a mac and he double screens on Photoshop, however, we discovered that whenever he has two separate windows canvas open and organize the space and move on a canvas, it moves the other canvas too.

  What version of Photoshop?

  Have the feeling that has nothing to do with two monitors, but disabling this setting if the hand tool.

  

  That would have also fixed my 2nd guess reset preferences.

• Do not like and want to go back, or use other products

  Do not like the new Firefox and wants to go back, or use other products such as the chrome

  None of these methods works to open the Options page:

  • button '3-bar' menu > Options
    • Or if you have moved the Toolbar Options, this is the gear icon
  • Tools menu > Options
    • If you do not normally display the menu bar, press the Alt key to temporarily show

  If you get the same error in both directions, your installation of Firefox could be damaged. To do this, I suggest:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 40.0.3 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  No improvement with the toolbars?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Did you see if the ideas presented in the response of this other thread can help?

  Multiport USB - C map update will not install

  A few usual ideas, reset SMC, the NVRAM reset, start in safe mode; VR;

  the kitchen sink; wash the cat... burning incense. I would try a variety of things!