Use setup - all-in - one B010b cartridges

Similar Questions

• LaserJet pro m127 fn: impossible to analyze by using HP all-in - One Printer Remote android app.

  Hello

  I use Hp all-in-One Printer Remote android app, Print function works fine but scanning works nor on my phone (4.4 KitKat) or Tablet (jelly bean 4.1).

  analysis function works by using my laptop (Windows 7)

  Help, please.

  Hi @EslamHassan

  Welcome to the Forums of HP's Support. I think that you have a question about the HP all-in-One Printer Remote app.

  The LaserJet M127fw printer is not a printer supported for the HP AiO application. I have included the HP printers and Mobile Printing Solutions support document for reference.

• Cannot print using the All in one 924 since filling of cartridges.

  Original title: all-in-one 924

  my printer is a dell all-in-one 924 photo and I had my cartridges refilled by a local ink store, however since I brought them home and put them in the printer the printer does not seem to recognize. I don't understand, can someone have an answer

  This occurs now and then with the refills and cartridges advantage trati. Many manufacturers of printers do not allow them so they can earn money from the outrageous prices they charge for new ones. Contact Dell.

• 3636 Deskjet all-in-One: ink cartridge is Deskjet 3636 configuration necessary?

  The black cartridge for installation provided with my printer all-in-one Deskjet 3636 recently bought is defective. My printer does not recognize the cartridge. I followed all the troubleshooting steps, including turning on/off the printer and the cleaning cartridge, however, nothing works. What the configuration required to install cartridge? The color cartridge is recognized and the printer is connected wireless. The only issue I'm having is the black cartridge. Could I buy a regular black ink cartridge and use it for the first impression?

  Yes, you must use cartridges for initial Setup configuration and operation of the printer. The best way to solve this problem is to put the printer in return for Exchange.

• The problems of alignment of the HP all-in-one print cartridge and color copier product families

  Click here for a detailed description of the following steps to solve the problems of alignment of print HP all-in-one cartridge and color copier product families.

  Step 1: review the alignment page paper was printed on
  Second step: the alignment page prints correctly
  Third step: perform a print cartridge cleaning procedure
  Step 4: try to align the page again
  1 automatic alignment of cartridges
  2 models with the semi-automatic print cartridge alignment
  3 "errors of alignment page not detected."
  4 additional information
  a. examples of alignment pages
  (b) without going through the print cartridge alignment

  Click here for assistance based on the cartridge system is using your printer.

  Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

  Best regards
  Kenneth

  I hope this helps!

• HP PSC 1510 all-in-one: ink cartridge for HP PSC 1510 all-in-ONE - no dealers found

  Hello

  I am looking for black HP 92 (C9362W), but your body just says there are no resellers found. Is - this saying that I can not find this cartridge can? If Yes, what ink cartridge can use HP PSC 1510 all-in-one model?

  Thank you

  Erika

  Hello

  Please try (Canada):

  http://www.shopbot.ca/pp-HP-C9362WC-compatible-price-133571.html

  http://www.shopbot.ca/pp-HP-C9362WC-HP-price-35399.html

  http://www.myprintershop.ca/HP-c9362w-92-ink-inkjet-cartridge-black.html

  Kind regards.

• Ink advantage all-in - One K209a: cartridge number NOT mentioned in ANY document, anywhere in the HP, on HP website course Supply for K209a-z

  I will try to find suitable cartridge number to the

  HP Deskjet Ink Advantage all-in-One Printer - K209a.

  But the cartridge number NOT mentioned in ANY document downloaded for this printer, OR anywhere in the HP Web site for this product, OR the printer Web page is located on the HP supply course!

  Crazy way to support product by HP!

  According to the Guide of reference here to page 1...

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-all-in-one-printer-series---K2/3811342/model/3811361/manuals

  The printer uses cartridges HP 703.

• OfficeJet J6450 All in One printer cartridge wrong cartridge, but it is not

  I have an Officejet J6450 All in One Printer.  I only use the new HP cartridges (not renovated, manual not refilling).  I installed a 74XL into the printer about a month with expiration of 02/11/2014.  It is still more than 1/2 full and very well printed yesterday.  Today, without apparent reason, the printer is saying that the ink cartridge is not supported by my printer... it is evil.  I tried a reset (3 and the # and when it does not 6 and the #) unplug him and by plugging it in.  I also removed the cartridge and tried both resets and then put it back in and still got the same error message.    I cleaned the print heads with a coffee filter and distilled water and tried the reset with unplugging and plugging back.  That didn't fix it.  Also, I deleted all of the permits from the hard drive and reinstalled the drivers and all updates (which I am automatically in any case, if the printer was already updated yesterday).  That didn't fix it.  I have tried everything and can't get this stupid to work printer.  I spent hours and hours on this.  I put in a new cartridge and it seems to work now, but I don't want to lose more than 1/2 full cartridge with no recourse.  I am a mother of 6 and the ink is very, very expensive, and what happens if this happens again?  Someone at - it ideas?  Any help would be appreciated.

  Sounds like the cartridge has failed, because its guarantee until 2014 I would contact HP telephone support. Can you please let us know how you get on?
  Thank you
  Ciara

• 4630 HP e-all-in-one printer cartridge change

  Recently bought a HP 4630 e-all-in-one printer. When the black cartridge needed evolution for the first time I have been unable to get printing to work again.  It displays the message «the following ink cartridges need to be replaced...» "followed by a symbol of glass side means time.  I replaced both black and color cartridges, and they are both the correct number (61) for the printer.  No help available?

  Hi john1936,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with the printer and ink cartridges.  I have found a document that will resolve this problem. Please note that the title of the document does not list the error you have however it will solve the problem at hand.

  Please click on the following link that deals with a "missing cartridge", 'cartridge problem,' or "not compatible ink cartridges" Error Message is displayed on the control panel.

  I suggest also that if you have the printer power cable connected to a bar/power strip, please remove and connect it directly to a wall outlet. Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.  This document is generally for HP products even if a LaserJet printer for example the cottage.

  Please do not hesitate to write again for any further assistance.

  Thank you for your time.

• C310 HP All in One: black cartridge won't print; Alignment failed

  Printer works perfectly, as usual.  Rec'd notice to update the drivers of HP software; has done, and suddenly black ink does not print at all.  Done all the troubleshooting steps: test page printed. print the Diagnostics page.  Align the print cartridges.  Cleaned print heads.  Although the cartridge has shown the more partial estimated ink level, replaced by the new HP black ink cartridge.  Still not printing black ink.

  Print uninstalled and reinstalled the software.  Tried everything above.  Has released a new cartridge and replaced with previous.  Also been clarified vents on both cartridges.  It is not that black ink is smudged on striated, it's as if there is no cartridge at all.  I also checked to make sure that the printer is not set to print grayscale.  It is located in the color and Normal.  Changed for the better, still nothing.

  HP Print and Scan Doctor initially show all correct.  The device status is now red X: Make sure cartridges and printheads are correct or your printer.  All are genuine HP cartridges.  Now I get a message on the printer alignment failed.  Is it possible that this is related to the update printer drivers?  I have never had a printer HP fail before.  Have at least six of them.  I do not use the printer a lot it should be worn.  In addition, it printed fine until what I've updated the drivers.

  Advice on what to try next? Thank you.

  Hello

  The only troubleshooting steps to run is clean print head.

  Make sure that you perform print head cleaning for at least 3 times.

  If the problem persists, then the print head must be replaced.

  You need to call HP Technical Support to get help to get the printhead replaced.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• steps to enlarge the copy using L7750 all-in-one printer

  Can someone walk me through step by steps to 'expand' copy to my Office Jet Pro L7750 printer all-in-one? Although your that someone can share the steps to "reduce" a copy as well? Thanks for all help!

  Hi RogS,

  I'd be happy to get you extra little information, it may just take me a few days I can send you by mail or e-mail, but I can post here for you in the forums

  Bear with me and I'll post at the time where I got what you are looking for!

• the installation program used HP all-in-one

  my computer don't recognize me as the administrator so I'm unable to install my printer all-in-one psc 2410 HP

  Hello

  1. who is the operating system installed on your system?

  2. What is the error message you get?

  3. are you able to install other programs?

  4. did you of recent changes to the system?

  5 did you changes to user account settings?

  Follow the steps mentioned below and check if the problem is resolved.

  Method 1:

  I suggest you to install the software of the printer in high mode.

  (a) right click on the file of the software, click Run as administrator.

  Method 2: Set up the printer.

  Follow the link below and install the printer and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Let us know if it helps.

• I use my all in one printer regardless of my computer. I only need like a copycat but it is stuck on "realign cartridges" I can't seem to do

  I can't get my printer to leave 'religning cartridges. He won't budge from this mode. Any suggs?

  Bro.Ed / * address email is removed from the privacy *

  Your best bet would be to check on the web site of the manufacturer or the forums of users for a solution. As you use it as a printer or a scanner, then this is more a problem of possible material than a Windows problem.
  It would also help more if you would like to mention the brand and the AIO model you use.

  SC Tom

• HP Photosmart Plus all-in-One: ink cartridge problems

  I have a model B209.  Last week, I decided that I would take the four staples of cartridgesto used, because they have a recycling program.  I wanted to only buy black ink, so I bought 2 separate packages of the 564 Black.  Has opened a package and installed as usual.  All I keep seeing is problem Catrridge of ink: the following ink cartridges seems to be missing or damaged.  see status screen on your computer for more details.  The question is # 1 status display has not yet shown on my computer. #2 I can't even to other options on the Touchscrren of the printer.  I have read and watched videos of people who give directions and instructions on cleaning the print heads.  I tried to remove the printhead, soaking in the water, leaving back dry and enforcement.  I did these things repeatedly.  When I soak the print head in the water, the water changes color.  I hope that I have accidentally hit the wrong part of print head when I removed it from the printer.  Please help, because it's my only other option when I can't access wifi to my portable device used for the printing of tickets, Groupons, etc..  Thank you!

  Your printer requres all 4 cartridges to be present, that is why the printer tells you that the cartridges are missing can may not last.

  Some newer model printers, which use the cartridges with integrated print heads, can operate with only the black cartridge only.

  But the B209, separated print head and ink cartridges, if not all the cartridges are installed, the print head does not work.

• HP C7280 All IN ONE PRINTER: Cartridges HP 02 introduction

  The C7280 printer was given to me still in the box, but the HP 02 cartridges were missing. So I bought new cartridges and installed.

  A message appears on the printer that the ' introductory cartridges provided with the printer must be installed. "

  What is the difference and how do I get my new cartridges to work?

  Hi LGN1,

  I think you need to contact HP support.  It seems to me that this printer has never been used, but somehow 02 original cartridges that came in the box have been separated from the printer.

  02 original cartridges are slightly different from that of the cartridges that you buy in the stores because as when initalises it the printer for the first time, it uses ink to prepare the printer for this reason all the Starter supplies 02 have additional Ink in them to account for this so that it does not adversely affect the performance of the first cartridges used by a customer.

  It may be possible to HP support to provide you with Starter cartridges.  Here is a link to contact HP.  Simply select your country.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  I hope they are able to help you.