Use the listbox control to select several channels and display on the chart

Similar Questions

• Simultaneously select several layers and sous-calques

  Hello

  I'll have to select several layers and their Undercoats in Illustrator 2014, but sticking to the procedure described in the post below only lets you select several "main layers" with the left sublayer deselected.

  Re: Is it possible to select more than one layer by selecting the first and the last layers?

  Could someone please explain how the layers and sous-calques can be selected in the layers panel?

  In Illustrator, make more and more confused about the layer control...

  Thank you in advance,

  EAD

  That would be nice.

  Looks like a candidate for a feature request:

  Adobe - feature request/Bug Report Form

• Select several Kings and set the properties for each of them

  Hi all

  I am currently working on a project on the thermal camera images. What I have to do is to define multiple regions of interest and assign specific properties such as temperature and emissivity of these Kings.

  So I was wondering:

  1 that is, possible to select several kings with a table keeping up-to-date of the Kings, the user has chosen on the front? (Or each KING might have a cluster on the front panel that contains its properties, which can be changed later.)

  2. is that possible to set specific properties such as temperature in the specfic KING, these properties and will be updated for the return on investment?

  Thank you so much and looking forward to some good ideas or tips.

  See you soon,.

  Version

  Hi all

  The attachment is what I've done now. However, instead create a .txt file to display information, it would be perfect to display the name of the KING and its properties in Control Panel before, as in the first column is 1 KING, KING 2, 3 return on investment, etc, and the other columns will be responsible for some information on the return on specific investment and its properties... Because I couldn't find something similar here, I really need your help.

  Thank you

  Version

• The user select several shapes and assign the variable

  Hello

  I worked mainly Storyline articulate and now I'm back in Captivate 8 I really miss simplicity of the scenario

  I need to create a very simple interaction "select all the boxes." I want the text in boxes and the user to select as much as they wish (there are 10 in total) and that selected they should change their 'down' State, so it is obvious that they have enabled the box on and then a variable is assigned to show later in the course.

  I told the Action for the award of variable when the user clicks on but just slide forward and I can't select several options. Also, there is a pause on the button continue for the slide does not move on to the next.

  Can someone tell me how I can do this SIMPLE interaction quickly?

  A simple action will always be out of reading, replace it with a standard advanced action (can be a single line, but I think you will need more than one).

  Why choose Standard Simple action? -Captivate Blog

  It also has a link to a YouTube video.

  Keep with scenario then... for me it's very simple, but that's just me.

  What should be stored in the variable? The number of texts chosen? Or do you want a text variable and change this variable from 0 to 1 if the corresponding text is selected?

  Why not use the interaction of checkboxes? It's pretty simple to use, it will store the answers selected in the variables.

  If you explain better what you want to, have solutions for all situations.

• Several channels AND DAQ

  Hello!

  I have a problem regarding the acquisition of data from multiple channels. I get a channel data in time, but when I try to do a similar code to get data from another channel, it will not work. This can be done with the DAQ assistant, but I want to avoid this solution, because it slows down the program a little.

  The snapshot accessory show how this is done for 1 channel. Can I use a similar program for the acquisition of several channels?

  Thanks for your help.

  You must only specify several channels in your task - i.e. Dev1\ai0:1 and replace the DAQmx Read N channels. Go to the task in MAX and click the channels button Add. Follow the directions.

• Select several files and store in table: folder object type turns into a string?

  Hello

  I'm trying to implement the following:

  The user selects a folder (which contains subfolders) in a dialog box:

  Set Dateiauswahl = CreateObject. BrowseForFolder (0, "Verzeichnis Park", 512, mess_path)

  Folder value = CreateObject ("Scripting.FileSystemObject"). GetFolder (Dateiauswahl.Self.Path)

  All subfolders of the selected folders are listed in two variables with the overall picture:

  Call GlobalDim ("FolderList (" & Ordner.SubFolders.Count - 1 & "" ")" ")

  Call GlobalDim ("FolderPaths (" & Ordner.SubFolders.Count - 1 & "" ")" ")

  f = 0
  for each Unterordner in Ordner.SubFolders
  FolderList (f) = Unterordner.Name
  FolderPaths (f) = Unterordner
  f = f + 1

  next

  Only later the files of some of the subfolders should be stored in another file list table:

  f = 0
  for q = 0 to UBound (selection)
  Unterordner = FolderPaths (selection (q))
  Call MsgBox (Unterordner)
  For each file in Unterordner.Files
  If instr (1, File.Name, "Speed") = 0 then
  FileList (f) = File.Path
  f = f + 1
  end if
  Next

  next

  Now I seem to have a problem with the type data stored in the FolderPaths table. While Unterordner is a Folder object and must be a Folder object for each file in Unterordner.Files to work, store in the array it transformed into a string variable.

  I don't really understand why and am looking for a solution so that I can extract single table FolderPaths subfolders and then extract the files.

  Hi maliya,.

  To assign an object to an array element (or any other variable), you must use the Set syntax, like this:

  Set FolderPaths (f) = Unterordner

  Then later you can retrieve it with the same syntax:

  Set Unterordner = FolderPaths (selection (q))

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Select several selectors and change their

  This may be hard to explain but I've seen a tutorial (doesn't seem to find more I forgot who it was!) where the guy was in selecting as < li > 5 elements at the same time and adding a href by typing it once only or by switching a totally cool per tag, but he could also choose several selectors and edit them without selecting the text inside this selector. As he had 4 paragraphs of text and he wanted to add a class to them all and it somehow all the selected and added all at once. I dreamed right on this in the hope of such a characteristic, if not direct please!

  Soon in Dreamweaver multiple selections parentheses - YouTube

• Magic Wand tool selects several items and won't let me not deselect everything I don't want

  I was with the SHIFT key to select multiple items, and all of a sudden Photoshop cc is not let me clear ALL.

  I don't even have to press the SHIFT key now selects automatically no matter what I click.

  The items that are currently selected are not the same colors so I know that this isn't just misunderstanding on these items as I want.

  Is it possible that I accidentally changed something where it is set to nothing I click on select automatically?

  Why now when I try to disable whatever it is, is not it? I can click on a specific item, select it, then click the exact the same task and it will not deselect.

  Help, please! A bit new, but I was easily using the magic wand to select the text and fill with "content-aware" but now even when I fill, he left this section and then selected me will not deselect this period.

  The reset tool:

  

• Select several layers and harmonizing via a script

  

  I have the following configuration layer and here is what I want to do via a script

  (1) select Layer 1 and layer 0

  (2) align the 0 to the left of the canvas layer

  (3) select Layer 1 copy of layer 0 and

  (4) align the layer 0 copy to the right of the canvas

  Is it still possible via the script? Changing the size of the documents

  If you look at the script that I posted it doesn't select it all, and the two alignment measures to align the active layer.  All the alignment of four Charter id are included in the code. all you need to do is target the layer that you want to align. It should look like this

  var savedActiveLayer = app.activeDocument.activeLayer;  Save the current layer of adtive

  app.activeDocument.selection.selectAll ();                          Select all

  Left ('AdLf'); Right ('AdRg'); Top ('AdTp'); Bottom ('AdBt'); Center Horizontal ('AdCH'); Center Vertical ('AdCV');

  Add code to the target 0 layer / / activeDocument.activeLayer = layers 0

  align ("AdLf");                                                                    Align to selection on the left side

  Add code to the target layer 0 copy / / activeDocument.activeLayer = copy of layers 0

  align ("AdRg");                                                                  Align to selection on the right side

  app.activeDocument.selection.deselect ();                           Deselect the option

  app.activeDocument.activeLayer = savedActiveLayer;        restore the current layer

  //////////////////////////////////////////////////

  align (method) {} function

  var / / desc = new ActionDescriptor();

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Lyr"), charIDToTypeID ('Ordn'), charIDToTypeID ("Trgt'));

  desc.putReference (charIDToTypeID ("null"), ref);

  desc.putEnumerated (charIDToTypeID ('Usng"), charIDToTypeID ("ADSt"), charIDToTypeID (method));

  executeAction (charIDToTypeID ('Algn'), desc, DialogModes.NO);

  };

• My windows xp has malware and I was wondering if my emails on outlook express using the Charter will remain?

  Recently, my windows xp had malware and I was wondering if my emails on outlook express would always be there when I fix it? My email is the Charter. Thank you!!!

  If you are unable to copy Malwarebytes to the machine in question, then as I said, you are at the mercy of the people from the shop.

• Phase shift a channel and display

  Hello

  I'm working on a project for which I have to display the I-Q constellation plot and normalize the data to fit a circle of unit RADIUS.

  I'm able to do this, but the problem is sometimes the signal in one of the channels is very low and therefore, the plot moves close to the routes (Please find attached the file, this is the best position, if a channel has a weak signal, the movements from point to one of the axes). When this happens, I want to add a phase shift of the signal (45 degrees and multiples of it) to bring to the back for the best position. I tried to use the extracted tone vi phase go, add 45 degrees, but how to rebuild the spirit of the new signal phase?

  Can someone help me please?

  Thank you very much

  Despres

  
  

• How to select several channels in the drop-down list for switching?

  Hello

  I use TS2015 SP1 and SwitchExec 2015. I created a list of routes that are now visible in the properties of the step "Activation" in the drop-down list field "Way (s) to connect".

  Here, I can click on an item in the list to select it.

  What can I do to select a second item in the drop-down list?

  It seems that I have to write the second element after the decimal point manually. Is this correct? Or y at - it something to select back in the menu drop-down?

  Thanks for help

  My bad!

  I wanted to say: «M2_C6R6 and M2_C7R7»

• How to: using the same control panel for several vi and reproducing change to the control panel.

  I created a labview project that contains about 40 vi.  Each vi has a joint control panel which is a group of ip address, or address of the port and the parameters that are passed high-level vi at low level vi for the purpose of control and access our daq cards.  As this control panel exists in all the vi and must not be the same there is a problem when the need to make a change or update the controls during development.  The problem is how long it takes to go and change the control panel of each single vi.  I wish I had a way of reproducing a change in the Panel of control through all six simultaneously.

  All controls in the control panel are in a bundle, so all values are passed to 1 thread.

  I tried to turn the Panel in a sub vi and this way I can just "create control" and have output parameters maniuplate vi, but if I update the vi, I still have to go back and create a new control for each vi under the control has changed.

  I tried using secondary and the creation of the control panel in a sub vi which is displayed in the secondary, but gives the undesirable consequence of not being able to view or change the settings of the control panel if the program does not work, as pristine as when sub-panels program does not work.

  Is there a another way to display the front panel of a Subvi next using a panel of void?  Is there a better way to propagate changes in a bundle in a series of vi?

  Yes a def type might help you and I would take the next step to make a strict type def if you want the look to be the same on all its bodies. You can also view this nugget on Type definitions for more idea about it.

  Have fun

  Ben

• How to select two channels and send to a series to write using the loop of the case

  I had a series write who have different orders to different situations. The same reading series should read both. How can I do it. Means that if I have a 500\r\nZ of the chain. I have a case, it should be - Zand 500\r\n other case + 500\r\n Z. But for boyh these cases must be read with a write serail. How can I do ITI. Help, please

  You can't guarantee that these two conditions would not be affected at the same time.  You will need to send a separate command for each condition.

  In addition, using EQUALS on floating points is dangerous.  You could never get the condition because a little really low could be turned off.

• selecting xy plots using the chart

  I created an application that draws about 20 circles on a XY Chart. Each circle is to use a different field. I would like to be able to select a trace by clicking on a specific circle on the graph and then extract these data from the graph. Is this possible?

  I consider using a structure of the event and a cursor to do the job.  Here is a little example to help you get started.