Use the system account option is disabled

Similar Questions

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error: "the system restore is disabled by group policy" when he tried to use the system restore

  Original title: group policy

  When I try to use the system restore, I get "system restore is disabled by group policy. How can I fix this problem?

  Hi bluelilly,

  1. is your computer connected to a domain?
  2. don't you make changes before the show?

  This occurs if the Configuration policy to disable is enabled on your system, either by using Group Policy or through the registry editor. For stand-alone systems Windows Vista, follow these steps:
  Step 1: Using the Group Policy Editor. If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in, follow these steps:
  a. Click Start, type gpedit.msc and press ENTER.
  b. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  c. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  d. Quit Group Policy Editor.
  e. restart the computer and check the difference.

  Step 2: Using the registry editor
  a. Click Start, type regedit.exe and press ENTER
  b. navigate to the following key: HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  (c) in the right pane, delete the value named DisableConfig.
  d. Quit Registry Editor.
  e. restart the computer and check the difference.

  Very important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
  See Registry backup

  If your computer is connected to a domain, then we recommend that you post your query toTechnet Forums Windows Vista to improve the assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I cannot acess my main profile and you must use the guest account

  I cannot acess my main profile and you must use the guest account

  Hello

  There may be several error messages and/or other conditions however these methods
  should help you regain access.

  If you suspect any malware, a system restore is an option:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------------------------------------------------------------------

  Other methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• In the System Recovery Options administrator password?

  Hello dear users of Toshiba.

  I'm willing to use the "Toshiba Recovery Wizard" in the "System Recovery Options" (after pressing F8 when the computer starts) but when I select Administrator as a user, he invites me for a password.

  I double checked my Vista user accounts and the administrator (me) is certainly not no matter what password that are bound to him.
  My problem is that I can't use recovery tool if I don't log in as an administrator...

  Can someone please help? Y at - it factory default password?

  Thanks to you all!

  Hello

  To be honest, your announcement confused me a bit especially the part where you wrote: but when I select Administrator as a user. I don't understand what you mean with it.
  But first some basic information:

  Can you imagine you use Toshiba notebook with the settings and someone will make a joke and use the F8 option and reinstall Vista. All of your settings, data and pre-installed software will be gone. Or can someone just use cell phones stolen to get around Vista secure password for laptop and do clean install of Vista using F8 option.

  To avoid this Toshiba has this security feature and each try to reload Vista password OS will be refused. So if you use the password to log in to Vista the same password will be required before the installation of recovery begins. By default, there is no password and the name of the administrator account will be shown when you start the recovery procedure. When you enter the correct password, the installation will continue.

  So much about the theory. I don't know how you do and which account you use, but the fact is, without administration account name and correct password, you won't be able to install Vista using this HARD drive recovery option.

• Cannot access the internet using the account invited in Vista. Unable to access using the administrator account.

  This one is strange - and I repeat that the problem is that I can't access the internet by using the administrator account.  The guest account works fine.  All programs are there and launch the fine (IE, Live Messenger, Yahoo Messenger, etc.), but they cling right there when I try to log on or access to any Web site.

  While in the administrator account, I ran "CMD" in the run menu and can ping Yahoo, Google, etc. with success.  It's embarrassing - any ideas how the administrator account can act that way then the guest account works perfectly?

  Hello Allen LaBrune,.

  If you are able to ping the websites from the command prompt, it means that your computer connectivity is fine.

  ·         What is the antivirus installed on your computer protection software?

  ·         Have you tried to browse by disabling the firewall?

  Try disabling the firewall on the computer and check if you are able to navigate.

  If this does not work, reset Internet Explorer settings and check if you can browse.

  To use the feature reset the settings of Internet Explorer in the Control Panel, follow these steps:

  1. exit all programs, including Internet Explorer (if it is running). 2. If you are using Windows Vista, click Start, type the following command in the start search box and press ENTER: Inetcpl.cpl The Internet Options dialog box appears. 3. click on the Advanced tab. 4. Under Reset Internet Explorer settings, click Reset. Then click again on reset. 5. when Internet Explorer has finished resetting the settings, click close in the reset Internet Explorer settings dialog. 6. restart Internet Explorer. For you reference, you can visit the link for the following Article: http://support.Microsoft.com/kb/923737

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Clicking on a mailto: link using the wrong account to send an e-mail. Is it possible to designate a default account?

  I have several accounts that I use in thunderbird. Everything works fine and I have no problem at all. But when I am on the web and click on a "mailto:" link on a Web site, Thunderbird always opens the new e-mail window using the first account in the "stack". I never use this account to send mail... I want to use another account but cannot figure out how twell TB that is.

  At the top e-mail account is the default e-mail account.

  Tools > accounts settings
  or
  Right-click on the name of the e-mail account, and then select "settings".

  Select the desired default mail account name.
  Click on "Account Actions" to get the drop down options
  Click on "Set as default"
  Click OK to save the changes.

• I am looking for a solution Server (with Te css) for the fact that Firefox uses the system DPI settings, which makes my site look (too) big.

  My site appears much too big in firefox. And I want all browsers to view my site properly.
  I know that there are settings wihtin firefox that fix this problem. But I'm looking for a solution on server side, so that visitors to my site must not be disturbed by changing their settings.

  You may need to change your site as soon as 30 Chrome and IE 11 will also use the system DPI setting (like Firefox does now).

  Possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• When I try to use the system restore I get is an empty box where the restore points should be restore which stops me using the restore of the system how can I get the restoration back bridges

  I tried to use my system restore, but when I go into it all dates are missing from the box and I can't use the system I tried many different things, but nothing is done, everyone has ideas

  If your system restore page display only the title bar 'System Restore', or your accounts settings page of users shows that the 'User accounts' title bar and the screen where information needs to be is an empty white box...

  System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

  Remember that the system restore is not a time machine.

  Your system is currently or has been reached by malicious software.

  You can now fix the symptom and scanning for malware later, or you can now find malware and fix the remains later.  I recommend just fixing the symptom of the empty page and forget to do the scans.  The symptom of the problem of fixing and fixing the problem are two different things.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Just fix the immediate question:

  Looks like your file jscript.dll became somehow not registered so you can re-record it.

  There are probably a few other things that do not work you know yet, so fix them all at once.

  Re-registration of these DLLs is correct, even if they do not need renewal.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript .dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Now check your timetable for restoration of the system and/or the user account settings page.

• How to restore Windows Safe Boot to Normal of startup using the System Configuration?

  Hello
  I changed my home base boot of windows vista in safe mode of configuration of the system by mistake, windows tries to start in safe mode, but does not start, now how can I return windows to boot in SafeMode the normal start?
  Thank you.

  Hi Muhummad,

  Please contact Microsoft Community Forum.

  I understand that you are unable to start your computer in normal mode.

  I will certainly help you in this matter.

  Please follow the methods.

  Method 1:

  Please complete the restore of the system of the environment of Windows Recovery for the date and time when the computer was working fine.

  See the link.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Method 2:

  Follow the steps in the link.

  http://Windows.Microsoft.com/en-in/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  NOTE: a custom (clean) installation of Windows will permanently delete all of the files on your computer and reinstall Windows, so only use this option if all other recovery options have been unsuccessful. After installation, you will need to reinstall your programs and restore your files from backup copies

  In case you have questions about the Windows operating system, please post on the Forum of the Microsoft community.

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Cannot send email: message that the system has been temporarily disabled for security reasons

  original title: cannot send e-mail

  I can't use the system of electronic mail by default on my computer to send e-mail.  I get the message that the system has been temporarily disabled for security reasons.  I am told that when I close the screen, a series of numbers will appear and typing reactivate the system.  However, no figure never appears.  What can I do to get this thing working.  I really need.

  Hi marniez,

  Please see the thread similar to the following for a solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/my-new-Windows-Live-email-system-is-locked-by/4a96dc32-d8a8-4FD5-a97d-ec45264fe839

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.