Use the time protocol network on ciro to get the timestamp?

I take a timestamp from a Protocol Server network time as NIST on a peripheral cRIO connected to the internet. How can I do this? There must be someone in our labview community who has done this before, or knows how to do. Examples of code valued

Open mouth, insert foot. http://digital.NI.com/public.nsf/allkb/F2B057C72B537EA2862572D100646D43

cRIO can now (8,6) automatically synchronize a SNTP server on a specified interval. If I put in place that it will automatically keep the right system clock and I can simply take the system time when I need a timestamp.

Why isn't the search NOR as good as just using google to search the site of NOR? Why OR does not implement a google search? It's so easy, I have on my website.

Tags: NI Software

Similar Questions

  • Can I use the timestamp to a global variable that is published to network to reduce network traffic?

    I would use a couple of network-has published the global variables that will contain large groups of data.  I want to host them on a device, but read them in several - consider a distributed control system.  The data will be updated very rarely, but when that happens, I want that all my GUI to know quickly.  I have all the GUI, simply read data 4 x per second (which would be fast enough), but I was wondering if there is a more elegant solution (always using global variables).  If I read only the timestamp 4 x per second each of the HMI, compare to the last reading and then interrogate the integer variable if timestamps are different, which will require fewer resources that just enter the integer variable each time?  In other words, the read timestamp uses the same amount of resources as the reading of the entire variable?

    With really simple code, assuming that the cluster "Data" is big enough, made...

    .. .get me no benefit on...

    mark3545 wrote:

    Which means that they are already doing what I want anyway, no?  If the reader is updated when it changes the writer, I can survey as often I want without increased traffic, correct?

    That is right.

  • Use the timestamp when another cell contains one of two values

    Hi everyone again,

    I am struggling with a formula more in number. I have a formula whose time stamps the current date in a cell when a corresponding cell in the map is filled with '1 '.

    =IF(C3=1,TODAY,"")
    

    Hey Joe,

    IF and WHERE are your friends.

    Formula in D3 (fill down)

    = IF (OR (C3 = 1, C3 = "G"), TODAY (),"" ")

    Today is dynamic; It is not a timestamp.

    If you open the document tomorrow, it will be a new today (July 23, 2016, at least in Australia).

    Do you want a real timestamp (scheduled) or a dynamic date?

    Kind regards

    Ian.

  • How to use the timestamp on the layer 2 of PCI-1588

    Hello

    I want to use PCI-1588 as a master of the node of 1588 version 2 (multicast Ethernet).

    But sample program is only for the version of 1588 2 node (multicast UDP/IPv4).

    Please give me information on how I can configure PCI - 1588 1588 Ethernet nodes multicast.

    See you soon.

    Tak.

    Hi yamaoka,.

    NOR-Sync, the driver that supports the PCI-1588, currently only supports layer 3 packets. If you have additional questions, I recommend you to post on the forum PXI. I think you'll have better luck with questions about PCI-1588.

  • Need to record the timestamp after activation...

    Hello world! I am currently working on a .vi for some fire tests and I need help, try to understand this.

    I have some smoke detectors in place. The tension extends from-10,4 V to 10.4 V and I use FieldPoint

    When the voltage is at 10.4 the detector makes no noise, or, when the detector is less than 10,4 V turn off meaning that it detected smoke.

    This decline occurs when I need to be able to record the timestamp and display it on the front panel. I thought of ways to do it, but I can't think about all the right ways.

    If anyone has any suggestions that would be greatly appreciated.

    Thank you

    -Tanya

    Hi tanyasue327,

    Assuming you are using the FP Read VI in order to acquire the tension of your FieldPoint, you should be able to use the output from 'timestamp' read FP to get the time associated with the value being read. "" The 'timestamp' output will be in a double data type, but you can use the ' timestamp' feature in the functions ' programming ' Timiing palette to convert this DBL to a Time Stamp data type. ' ' Then you can view this at the front panel through a time stamp indicator and/or write to deposit using the screw found in the functions file IO ' programming ' palette file IO.

    I hope this helps!

    Aaron P

    National Instruments

    Technical sales engineer

    http://www.NI.com/support

  • "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

    Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

    Hello X-x_MaGiC_x-X,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Try the rest of the stage in this article:

    System restore points are created automatically when the following occur:

    • When you install a new application or driver.
    • When you uninstall or install some programs.
    • When you install new updates
    • Automatically on a daily interval
    • Manually by creating a.
    • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

    So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

    Restore Windows Vista to a previous state

    In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

    If you can connect to Windows Vista, you must follow these steps.

    1. Close and save any documents that you have opened.
    2. Click the Start button to open your Start Menu. The Start button looks like this:
    3. When the Start Menu open click on the menu option all programs.
    4. Click once on the Start Menu Accessories group.
    5. Click once on the System Tools Start Menu group.
    6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

    You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

    1 screen of system restore

    By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

    2. the list of available restore points

    You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

    3. confirm the selected restore point

    If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

    4. second Confirmation

    If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

    5. restoration of a restore point

    When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

    6. system restore was successful

    If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

    7 undo the last system restore

    Your computer should now work correctly again.

    With the help of the restoration of the system in the Windows recovery environment

    Manual creation of Restore Points

    As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

    1. Click the Start button to open your Start Menu. The Start button looks like this:
    2. Click on the control panel menu option.
    3. Click the option menu system and Maintenance.
    4. Click on the system menu option.
    5. Click on the System Protection in the list on the left.

    You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

    8. the System Protection tab

    To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

    9. Enter the manual restore point title

    Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

    10. Manual restore point has been created

    Now that you have finished doing the manual restore point, you can close the system window.

    Try to download the correct and up-to-date drivers.

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Airport Express, Time Capsule and Airport Express using the same network

    Just moved into a new House and this is what I install.  I have 7 Port wired into the House.

    Closet of network in the Garage:

    • Cable modem
    • Airport Express
    • netgear switch 8 ports
    • It works pretty well.  All my wired connections work fine.  Wireless is quite good but cove not enough of space in my house.

    Think about adding my airport express capsule of time in my office - plugged into one of the hard wired connections.  Who works AND let me wish the WIFI?

    Thank you!

    Yes fine, assuming that first test you the Ethernet port in the office by connecting a computer (with WIFI disabled on the computer) using a spare Ethernet cable runs to ensure that the computer can get a good connection in this way.

    Put the airport Time Capsule to create a wireless network that uses the exact same wireless network name and password in your existing network. Apple installation "Wizard" automatically configure airport Time Capsule in the correct setting of the Bridge Mode for the device.

  • Use the second router to extend the network to Time Capsule

    I have a v7.6.7 running Time Capsule 1 TB and older airport. I'm hoping to add a second router in a new location, and I use an ethernet cable from the TC at the new router (TP Link Archer C5), updated to the latest version of the firmware. The IP address of the TC is 192.168.1.1.

    I have set up my router C5 as follows: allocation of IP 192.168.1.199, value DHCP = off, and I connect a cable between the TC ports and port WAN (not Internet) available on the C5. In the C5 wireless settings, I tried both using the TC SSID and pw and creating a new SSID and pw. In both cases, the network will work for a short time, but eventually the entire network, including the TC, stops working. I made no changes to the parameters of the TC on any trial.

    Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router? If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

    Is it possible to use a TC and a router not Apple on the same network? If so, what are the right settings for the TC and the secondary router?

    Yes. That would be the basis of a network of mobile type.

    The key for a roaming network parameters are:

    • The 'primary' router must be configured as a router. In other words, it must have active NAT and DHCP services.
    • All other routers used in a network of roaming must be reconfigured as a bridge.
    • All routers must broadcast a Wi - Fi network that uses the same network (SSID, aka) name, and the type of wireless security, and the password.
    • All routers must be interconnected by Ethernet. To provide Powerline adapters using an Ethernet connectivity should also work.

    If not, is it better to have the not Apple as main router and add the TC to the network created by the non-Apple router?

    Should not really which is the main in the roaming network.

    I think at this point, your current circuit line. To check that, I would suggest that you consider to bring back the router C5 in the same room as you have the TC. Then connect it directly to one of the LAN of the TC ports. Complete the entire upward to a mobile network and test it. If everything works, bring back the C5 in the desired location, and then try again.

    If it fails, then the circuit line will be tested to check that it provides a solid 'Ethernet' connection between the adapters.

  • Cellular data opens, but may not use the network have to reset net work every time

    Hello everyone

    My problem is:

    When you use the cell data, after several hours, the net is not available

    I have to reset the network every time

    and this happens every day

    I'm so sad!

    Hello

    If you have not already done so, it can help to upgrade your iPhone to the latest version of the software:

    Also, follow the steps detailed here:

  • I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

    I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

    If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

    As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

    At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

  • Cannot use the network after the first time backup volume machine

    Hello

    After the update to OS 10.11.4 my MACs are unable to use the network backup volume more.

    The volume of time machine is a device (RAID of LCM InXtron Taurus-S) external USB connected to a server of iMac (also running OS 10.11.4). Four MACs use this device as a backup time volume machine (all systems 10.11.4).

    What I've done so far has been clear the volume (twice) and rename with different names than in the past. Than I started the new backups for all of my MACs. The fist backup works fine for all machines. After it says, that the first backup is over, and he tries to perform the second backup an hour later, it is said that the volume does not support the necessary functions of AFP.

    I am still able to connect to the volume via afp: / /... If the finder (go to). As long as I use the volume for a single machine works. If I announce a backup from another machine, it evokes this error.

    Any suggestions?

    Thanks in advance.

    These must be run as administrator. If you have only one user account, you are the administrator.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    The title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the 'Start-up' (without the quotes). You should now see messages in the log with the words "departure * backup," where * represents one of the words "automatic", "manual" or "standard".

    Each message in the journal begins with the date and time when it was entered. Note the time stamp of the last 'Start' message that matches the start of a normal backup. Now

    DELETE THE WORD 'Start' TO THE TEXT BOX

    so that all messages are showing and highlight the newspaper at the same time, you noted. Select the time-stamped messages since then until the end of the backup or the end of the log if it is not clear. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    If all you see are messages that contain the word 'Start-up', you clear the text field.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. Don't post any more it is requested.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • I have a network drive. & Passwords, I want to force their users to log in there every time and do not use the last name of user and password.

    I have a network (an Iomega iconnect nas) drive. I want to force their users to log in there every time and do not use the last name of user and password. They can change it in control of card-how can I make sure they. I'm only using Windows 7 as standalones (with lan), there is no server connection

    Hello

    I suggest you post the same question in the TechNet forum and check if it helps.

    http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  • The "NVIDIA nForce 10/100 Mbps Ethernet" network card is not properly configured to use the IP Protocol on my HP vista.

    Initially my HP a6683w said that nvidia network controller experienced pilot or hardwear related issues, then NVIDIA had me download something and then restart my computer to see if the internet was starting to work again. Now, I restarted the computer and is trying to say that the adapter NVIDIA nforce 10/100 Mbps Ethernet have driver or hardware related issues. I want to just my internet to work again. How can I fix it?

    Hello

    1. have you made no hardware/software changes before the show?

    2. using an internet connection wired or wireless?

    3. are you a specific error message while trying to go online?

    Follow the steps mentioned below

    Method 1: Restart the computer using safe mode with active network.

    a. restart your computer.

    b. When you see the logo of the manufacturer of the computer, press F8.

    c. the display Advanced Startup Options , use the arrow keys to select Safe Mode with networkand press ENTER.

    d. connect to your computer with an account of a user who has administrator rights.

    Now check if you are able to connect to the network, if the problem persists, follow the next method

    Method 2:

    Follow the steps mentioned in the link and check with the question.

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows

    Method 3:

    Download and install the drivers from http://www.nvidia.com/Download/index.aspx?lang=en-us link with the question checking.

    It will be useful.

  • Can I do the router uses an older Protocol of WIFI (WEP) with Lion?

    A colleague who I am to help got a new router, which wwas pre configured by the provider.

    Lions (Lions of Montain) on MacBook Air can connect to the Internet easily around my iOS 9 mobile (personal "hot spot").

    My 9 immediately connected iOS devices.   Although older OSX (Lion? ML?, I don't know with certainty at this time) does not work.

    They see the net in the most convenient airport and can fill in the PW and the 'antennas' in the menu shows good connection, although Mail and Safari (only available applications) report: no connection to the Internet.

    Perhaps the kind of connection is newer legacy systems can in itself.

    Can I do the router uses an older Protocol of the WIFI (WEP) with Lion on Airport?

    Can I do the router uses an older Protocol of the WIFI (WEP) with Lion on Airport?

    This will not change anything, except less secure your network.  The encryption method does not affect the rest of the internet connections, and you indicate that you are connected to WiFi.

    You can check if you have a valid DNS address

    System-> network-> advanced-> DNS preferences

    You can test your own DNS addresses by clicking on the [+] sign and adding something like

    OpenDNS.org

    208.67.222.222

    208.67.220.220

    Google DNS

    8.8.8.8

    8.8.4.4

    You could try running "Network Diagnostics".

    Finder-> go-> go to folder->/System/Library/CoreServices

    This should open a folder

    Double click on-> Network Diagnostics

    Follow the instructions.

  • my wireless connection says "restricted access" no network connection. I used the same key code to get my other computer online

    my wireless connection says "restricted access" no network connection, I used the same key code to get my other computer I can have up to 5 computers online at the same time online.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    This means that the computer cannot connect to the router.

    Try this process.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Stack TCP/IP work should look like.

    Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

    http://www.ezlan.NET/Win7/status-NIC.jpg

    Description is the data of the card making.

    The physical address is MAC of the card number.

    The xx must be a number between 0 and 255 (all xx even number).

    YY should be between 0 and 255

    ZZ should be between 0 and 255 (zz all the same number.)

    The date of the lease must be valid at the present time.

    * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

    * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

    ---------------------------------------------------

    Above everything is OK, you must be able to connect to the router.  A window that says connected does not mean that you are really connected. Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see. If it is not connected in the log to router from any computer that can connect to the router wirelessly with a wire, disable wireless security, (make sure that the wireless SSID broadcast) is on and try to connect with no. wireless security.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack-MVP Windows Networking. WWW.EZLAN.NET

Maybe you are looking for

  • New tab next to Active

    Quick question for you guys a long time ago I did, but now I've done it I forgot how. So, how can I open new tab next to curent an and that I would be able to achieve, who without any add ons?

  • Profile Firefox cannot be loaded, it can be missing or inaccessible WINDOWS 8

    I have a Windows 8 OS on a PC. I've been using Firefox as my browser for several months. So, when I try to load Firefox, I get an error message, «could not load your profile Firefox.» It may be missing or inaccessible. "I've uninstalled and reinstall

  • Satellite A500 / 01 K - Web Camera error: "couldn't start the Application.

    I have a satellite A500 / 01 K running under Windows 7 64-bit. I get an error when I try to use my webcam; "Application has failed to start because the side-by-side configuration is incorrect." I tried updating the driver through the Device Manager,

  • Zbook 15 HP: updating Windows 10 & BIOS

    Just updated for Windows 10 Pro 64 bit on an HP Zbook 15 G2 model G7T32AV. So far no problem. Running of the M70 BIOS ver 1.02. Watch on the site of HP driver dates and see that there is an update to BIOS version 1.09 for Windows 10 64-bit OS. I don'

  • BlackBerry Smartphones icons hide, or change the order of appearance

    I use the BB Dimension Zen theme. The first icon of the application that appears on the home page is the Setup Wizard. Needless to say, I do not use this application very often. I'd rather have another icon at the top of this page. In fact, it would