Use Windows Media Player 12 to "Play To" 2 devices at the same time?

Similar Questions

• Windows media player does not play audio files downloaded from the Canon HF M41 HiDef camcorder

  I downloaded audio and video files from a Canon Vixia HF M41 camcorder to my computer.  When I try to read files with Windows Media Player, the video is fine but the audio is only a hum.  What codec must be installed to play audio, and where it is available for download?  My operating system is Windows 7, version 6.1 (Build 7601: SvcPack 1)

  Hello

  What type of file are you trying to play?

  Method 1:

  I suggest you follow the link and check.

  Play an audio or video file: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Method 2:

  I suggest you follow the link and check.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  See also:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Cannot get my headphones to work with windows media player. However, it works with Skype on the same system

  hepatitis tried looking for help microsoft collaboration BT can't get help online. I formatted my laptop 2 weeks ago and since then my headphones did not work with windows media player 11, although it plays on Skype on the same computer. any help?

  Hi famo10,

  (1) you get an error message?

  (2) is limited to Windows Media Player?

  (3) did you try Windows Media Player audio playback on the speakers?

  Method 1: Make sure that the Windows Media Player volume settings are properly adjusted and its volume is not muted. Now try to play different audio and video files and check if you can hear audio through headphones

  Method 2: Run the fixit available in the link below and check if that makes a difference

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/NO_SOUND/en-us?EntryPoint=lightbox

  Method 3: You can follow the steps mentioned in the link below

  How can I stop my music skip or break down when I play?

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player will not sync with my device rises the error in the status of the synchronization

  I ripped a cd to my windows media player - I then entered in the sync tab and dragged the album I had just torn off sync - it comes then a full synchronization, please click here for details when I click this, it displays error - I clicked on the Red 'x' and read the following it is not possible to get the certificate to the device. Contact the device manufacturer for a firmware update or other measures to address this problem. My camera is a Sony Walkman - I have previously synced

  Hello

  Thanks for posting the question to Microsoft Community.

  Let us try the following and see if that helps:

  Method 1: To resolve the problem, try to disconnect and reset.

  See your device manual for specific instructions on performing this procedure.

  Method 2: Check on the Sony Web site for any solution on this, also try to update the drivers for the Sony Walkman device firmware.

  For more information: Understanding sync errors and warnings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-sync-errors-and-warnings

  Note: The article above also applies to Windows 7.

  Windows Media Player sync: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/Windows-Media-Player-sync-frequently-asked-questions

  Hope this information helps. Response to help you further.

• Error when you try to play multimedia files using Windows Media Player C00D11B1

  Error C00D11B1

  A few days ago, that I could not windows to start at all it would just keep rebooting over and over when I tried to turn it on. After about one day it started working again fine except that now I have no sound at all. I get the message of theC00D11B1 of windows media player and I followed using web, but nothing works. All my audio devices are activated and started but when I run the test for his failure and I hear nothing. The speakers were working fine before the crash bit I had. Any help is appreciated.

  A few days ago, that I could not windows to start at all it would just keep rebooting over and over when I tried to turn it on. After about one day it started working again fine except that now I have no sound at all. I get the message of theC00D11B1 of windows media player and I followed using web, but nothing works. All my audio devices are activated and started but when I run the test for his failure and I hear nothing. The speakers were working fine before the crash bit I had. Any help is appreciated.

  =======================================
  No guarantee... but the following links may be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)

  Another possible solution:

  Q: error code cood11b1

  A: Try the following...
  Open Windows Media Player and go...
  Tools / Options / tab player... Uncheck the...
  Connect to internet / apply / OK.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Scratchy Audio only when you use Windows media player

  For more than a month now, when I use Windows Media Player 11 to play any audio file, the music sounds saturated and rough. The volume is louder than normal. It is on a 5 year old XP PC, and I haven't added new software or hardware lately.  I can play the same files on the same PC with other readers multimedia (VLC Media Player or Quicktime) and I don't have this problem, and it's okay if I use headphones or speakers. I tried to uninstall WMP11, but WMP10 has the same problem, and when her reinstalled WMP11 still sounds bad. I have also reinstalled the codecs windows audio. Any ideas?

  Check the audio improvements and put them all turned off:
  Begin playing a file and then click the arrow below the now playing tab, point to enhancements, click show improvements and then go through each of the options.

  You can also check and disable plug-ins:
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-plug-in-to-Windows-Media-Player

• Windows Media Player will not play WMV files

  Windows Media Player will not play WMV files, I get the following error:

  "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Evaluating is not a problem

  Other file formats work well

  Any reflection on a fix, I have already searched the web for a fix, it appears, this is a common question, but nobody has a solution that works

  Hello

  Method 1:

  FIX: Windows Media Player 11 cannot play WMV files that contain multiple video streams

  http://support.Microsoft.com/kb/947403

  Method 2:

  I suggest to disable audio enhancements and check if you're able to play .wmv files. Follow the method 1To disable audio improvements.

  a. Open Sound by clicking on the Start button, and then clicking Control Panel.

  (b) in the search box, type sound, and then click sound.

  c. on the playback tab, click speakers and then click Properties.

  d. click the enhancements tab, and then select Disable all enhancements checkbox.

  Method 3:

  I suggest to create a new user account and check if you're able to play the files. Click on the link below to create a new user account

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Thanks and regards.

• Windows Media Player unable to play media files

  License migration

  I recently got a virus in my system, I had to have my computer cleaned up so I could get back to using my computer. In any case, in my library of music 11 windows media I get 'You need a license to play this content' and blah, blah, blah. And then they start talking about license migration, and they tell me that I have to download a new license, but when I try to get this 'NEW' license it is some type of "screw up / error" and I can not play my content without going through rubbish even every time without any result of corrective.
  Help!

  I recently got a virus in my system, I had to have my computer cleaned up so I could get back to using my computer. In any case, in my library of music 11 windows media I get 'You need a license to play this content' and blah, blah, blah. And then they start talking about license migration, and they tell me that I have to download a new license, but when I try to get this 'NEW' license it is some type of "screw up / error" and I can not play my content without going through rubbish even every time without any result of corrective.
  Help!

  ===============================
  What is the error message?

  The following items may be worth a visit:

  (925705) when you try to use Windows Media Player 11

  play a digital rights management (DRM) - protected

  Multimedia, media cannot play

  http://support.Microsoft.com/default.aspx/KB/925705

  (this article specifies that the issue you're dealing with)
  can be caused by reinstalling Windows)

  Windows Vista-

  Privacy statement for Windows Media Player 11
  http://www.Microsoft.com/windows/windowsmedia/player/windowsvista/privacy.aspx

  Good luck...

  John Inzer - MS - MVP - digital media experience

• Why windows media player stops after playing four titles through the nwtwork using the net work receiver Onkyo 808'

  After you have configured my network using Windows media player player I can't play more than four tracks, then the reader falls asleep. What can I do to fix this problem.

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. what operating system is installed on the computer?
  2. the problem only occurs during playback of media via network?
  3. don't you make changes to the computer before the show?
  4. What is the accurate and complete error message you get?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library

  Method 2: I suggest to uninstall and reinstall Windows Media player, and check if that helps.
  
  Uninstalling and reinstalling Windows Media Player:
  Step 1: Turn off Windows Media Player:
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck the brand in the face of Windows Media Player.
  d. restart the computer
   
  Step 2: Enable the Windows Media Player:
  a. go to start and in the search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer.

  Turn on or off Windows features
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• How to convert an mp3 file to a file rtext? Can I use windows media player to play mp3 and have the recigition speech to convert to text?

  Can I use windows media player to play mp3 and have the recigition speech to convert to text?

  You can get on a conversion of 70% in reading a file in Windows Media Player using something like Dragon Naturally Speaking to convert. If you set the playback speed to slow in Windows Media Player to play > play speed, you will get a better result. The best option is to download the file to an audio transcription service, but which generally costs 0, 50-1, 00 per minute of audio.

• Windows media player will not play videos that I created a few years back. they use to play very well; now, I received the acquired codec error message. I use wmp 11

  My old videos in my windows media player will not play. acquire CODECS rises. I get audio but not video for all the movies at home. Movies that I downloaded and clips play very well. How can I fix it. I use wmp 11.

  Hello satindoll11233,

  1. What is the exact error message you get when you try to play videos?

  2. What is the format of the videos that you try to play?

  3. are you able to play other files with Windows Media Player?

  Media Player will not be able to play video files, if there are no required codecs or video format is not supported by Media Player.

  I suggest you to check the format of the video you are trying to play. You can also try the steps in the article to resolve this problem:

  http://support.Microsoft.com/kb/926373

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• is there a simple guide on how to use Windows Media Player to play MP3 files on a Web site

  I'm designing a simple website to a friend. They are singers and want 3 or 4 songs sample of people to listen to on the site.

  What is the easiest way to do this (I m not technical, it should be easy to understand)

  Idea is that the user accesses the page and chooss a song they click and hear 30-45 seconds of a recorded sample (MP3 file)

  Strive to do that. I thought it would be easy but can't seem to find a simple way to do it.

  Can it be done using Windows media player (records are MP3 files in the Player Windows Media.

  Help appreciated

  Ian

  I'm designing a simple website to a friend. They are singers and want 3 or 4 songs sample of people to listen to on the site.

  What is the easiest way to do this (I m not technical, it should be easy to understand)

  Idea is that the user accesses the page and chooss a song they click and hear 30-45 seconds of a recorded sample (MP3 file)

  Strive to do that. I thought it would be easy but can't seem to find a simple way to do it.

  Can it be done using Windows media player (records are MP3 files in the Player Windows Media.

  Help appreciated

  Ian

  If you have a music video, your friends sing you could install a flash drive on the Web site. If it is just an audio file, you must download the file to a file free host then post a link to the file on the Web site.  If Windows Media Player comes into play depends on what media player the person clicking the link used as their default media player. Windows Media Player will play no role in the file on your website. The link below contains a list of free audio files, hosting sites. There are many others that you can find with a simple search on Google.

  http://www.audiohostings.com/

  See also http://www.tripwiremagazine.com/2010/08/20-free-online-audio-players-for-your-websites-or-blogs.html

• In windows vista, hotmail, unable to play .wav files using windows media player. Error, said to dnload windows media player.

  In windows vista, hotmail, unable to play .wav files using windows media player. Error says to dnload windows media player

  Hi Leonard,.

  ·         Is it an attachment on Hotmail or Windows Mail?

  ·         Have you downloaded the file to read?

  ·         The issue is limited to Hotmail?

  Download and save the file on the hard drive. Check if you can play the file.

  Response with more information, so we can help you best.

  If it comes to Hotmail, you can also ask your question in Windows Live Solution Center.

  Hotmail - Windows Live Solution Center Portal

• Not able to play the fieles audio using Windows Media Player - error: Windows Media Player Error Message C00D11B1

  Sometimes the Audio files are not played using Windows Media Player. Even if I'm not able to turn on/off the audio. Settings audio button is not working too.

  Error: Windows Media Player Error Message C00D11B1

  When I rebooted my dell Inspiron laptop, this problem does not occur, and I am able to hear the audio. Let me know the fix for this problem permanently.

  Hello

  If you're having trouble playing a song or video, it may be because of the codec problem. I would suggest trying the following steps and check if it helps.

  Method 1:

  Run the Windows media player convenience store settings and check. Follow the steps to run the Troubleshooter:

  1. Press the Windows key + Q on your keyboard and type Troubleshooting and click Troubleshooting under results of research.
  2. Now, click on programs.
  3. Click the Windows media player settings to run the troubleshooter.
  4. Click on library of Windows media player to run the troubleshooter.

  Method 2:

  I suggest you to refer to the help article and check if it helps.

  Windows Media Player C00D11B1 error

  http://Windows.Microsoft.com/en-us/Windows7/C00D11B1

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Using Windows Media Player, I get the error: "the specified module could not be found" when I try to play a wave (.wav) file.

  I have re-installed sound edge card, updated the driver, checked that it is enabled in the bios. Play other types of sounds.

  Wave Systems sounds do not play either and everything by checking the sound scheme system sounds, (Panel > properties of sounds and audio devices > sounds tab) they don't play and the 'play' button is not enabled.

  Hi sureshotsd,

  · What version of Windows media player you have installed?

  · What is the service pack installed?

  · You receive an error with the error code?

  · Do you remember all the recent changes on the computer before the show?

  Follow the method below:

  Method 1:

  Create the new user on the computer account and check if you are able to play the file. You can check the link for the procedure to create the new user below account: how to create and configure user accounts in Windows XP:http://support.microsoft.com/kb/279783

  Go back with the results.

  Method 2:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.