used sytem repair from the installation disc difficult or too complicated?

do you know if the repair system hard to use from reinstalling vista irunning disk?  without any reason after windows drivres dell download does not start, it is just there to take all this time and if I'm lucky it will start, I used the configuration of the system, and that did not help. I know, it seems that he is sssoooo nearly all set to start at the same time, but in the system and the process where it lists everything that I don't know what is what, so I can't stop the useless stuff to start, I thing I have too many things that either doesn't work - I don't have not even half uninstalled or put in the easy computer were and if it's the dell drivers , screwing, then why vista does not work?

Dell has a touch screen F12 on boot options, but vista says to put in disk, press on restart and then repair, but what happens if I can't do it at the start or the dvd - rom does not start when I reboot?

and if it doesn't it's really complicated? I ran disk cleanup and repair. I ran to check memory, I had 140 GB free out of 240 GB, I ran two restorations system back to dates before I installed the drivers from dell, everything worked fine until last night, now dell takes to always to get to the windows startup takes part and windows to start even in safe mode.

I ran all the controls sytem dell pc and everything passes .so should I put the disc and hit restart? and should I first go to where he gives the choice to load some stuff or normally loads at startup, and which one should I use all or just selective to go until I reboot. Thanks for any help you can offer, because it runs now I don't even want to turn it off.

Which

Hello

You receive an error message?

Method 1:

You must restart your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

If you have a Windows installation disc, you can follow the procedure:

a. Insert the installation disc.

b. restart your computer.

c. click on the Start button, click the arrow next to the button lock and then click on restart.

d. If you are prompted, press any key to start Windows from the installation disc.

Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.

e. Select your language settings and then click Next.

f. click on repair your computer.

g. Select the operating system you want to repair, and then click Next.

h. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

WARNING OF THE BIOS:
Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

Method 2:
You can see startup Repair in Windows Vista, which is a recovery tool that can fix certain problems. You can check the link:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

Method 3:
You can check the event viewer for related event logs.
Open event viewer
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

You can also see the links provided to learn more:
http://support.Microsoft.com/mats/slow_windows_performance

http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

Tags: Windows

Similar Questions

  • Unable to boot from the installation disc

    I am trying to run repair on my imac 10.6 disk utility snow leopard.  I have no problem with the Superdrive drive.  The installation disc is fine.  I inserted the disc in the drive.  When it mounted on my desktop I stopped.  I pressed the c key and pressing the Start button.  The Apple logo appeared with the spinning wheel.  After two or three minuets logo Apple disappeared and replaced a circle with slash.  I had to pull the plug at this point here.

    Try instead boot into recovery mode.

    On OS X Recovery - Apple Support

  • Need help recovering from a blue screen. I re from the installation discs on hand and not intend to save all data currently on the hard disk.

    A number of months ago one of our computer got a virus and has gradually become unusable. He started as a kind of spyware, that obviously was not what it seemed. Now, we are to receive a blue screen every time we try to start the computer if I try in safe mode it brings me to the "Administrator" or "name of the wife." When I click on one of these he says it saves the parameters and then returns the same screen. I received what I believe to be the re installation of Dell discs, but now I don't know how to access. Thanks advance!

    If you have a Dell recovery disk, put it in the optical drive and restart the computer. As the computer starts, press the F12 key and choose to boot from the optical drive. The restore disc will start and that you follow the instructions.

    If you have a true Dell disk operating system, follow the steps above to boot from the disc of the operating system. Here are the links explaining how to do a fresh install of XP. Once your operating system is installed, you will then need to install the drivers for all your hardware. If you have received a genuine Dell OS disk you have too a disc called "Dell Resource CD". This CD has all of the drivers. Put in the drive, install the application, and then install the drivers that are found.

    Don't forget to update XP Service Pack 3 and make all Windows updates. Update of the common as programs Adobe Reader, Java, Flash, etc. for the latest versions. Install a good antivirus like NOD32 (commercial), Avast or Avira (free versions available).

    http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

  • I downloaded lightroom and putting in the serial number, I get "bad serial number", although I am reading from the installation disc.

    I downloaded Lightroom from the internet (I have a macbook air without cd player), when you try to activate it with the serial number of my installation disc, I get a message "bad serial number" even if I double checked my entry to make sure.

    Hi wolfgangb,

    We have you sent private message.

    Kind regards

    Mohit

  • install. App missing from the installation disc

    I replaced my original with a SSD hard drive. While I try to install Creative Suite 5.5 disc there is no install.app showing on any of the disks. How can we acquire or install install.app?

    Please try this link to download CS5.5: https://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

    I hope this helps.

    Concerning

    Megha Rawat

  • I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

    I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

    My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

    Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

    Thank you

    Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

    If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

    I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

    Thank you much for the help...

    Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

    Thank you

    @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

  • On Windows 7, 1334 of the error message when you try to repair XI Acrobat Standard. The software was already installed on my computer so I don't have the installation disc.   Can you please help?

    I have a laptop Windows 7 with Acrobat installed Standard XI.    The program was already installed on my laptop, so I don't have the installation disc.    I'm getting error 1334 and Error 1311 indicating the "file Source not found."    Do you have recommendations for repair?     As a reminder, the software was already installed on my computer so I don't have the installation disc.    Thank you.

    MST can be downloaded from http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html, but you may have problems depending on the operating system and if you have a volume license or upgrade. If the download works for you, don't forget to make a backup on another medium for the future.

  • Where are the video tutorials I have seen generated from the Installation of PhotoShop SC.5 disc?

    Where are the video tutorials I have seen generated from the Installation of PhotoShop SC.5 disc? How to work on a face, New CS5, how to undress in a background? etc. Very useful. You want to start here.

    Must be in the defined drive.  Probably not loaded on the computer during the installation.

  • I lost the installation disc, I have a XP OS on an old laptop IBM I would use INSTEAD on my macbook pro (which already has Parallels Desktop) - is it possible?

    I lost the installation disc, I have a XP OS on an old laptop IBM I would use INSTEAD on my macbook pro (which already has Parallels Desktop) - is it possible? I don't have a cd on my laptop burner - can I use an external hard drive

    OEM license...  N °

  • Can I get another copy of the installation discs to use with my product key?

    I bought a copy of XP Media Center in 2008. Recently, I tried to install it for the first time and received a message that windows needs to run the files are missing. He installed windows and ran for a few weeks now to start it flashes a blue screen for 1 second and then tries to restart again. Can I get another copy of the installation discs to use with my product key?

    Unfortunately, Windows XP Media Center has been removed and the installation of replacement discs are no longer available.

  • I've been using like Asus for the past five years, but my husband just gave me a Mac for my birthday. I have 5 Lightroom installed from the installation disk on my old computer. Is it possible to transfer to my new? In addition, I don't have a CD player m

    I've been using like Asus for the past five years, but my husband just gave me a Mac for my birthday. I have 5 Lightroom installed from the installation disk on my old computer. Is it possible to transfer to my new? In addition, I don't have a CD drive on my Mac.

    On your Mac, download Lightroom 5.7.1 of

    Adobe - Lightroom: For Macintosh: Adobe Photoshop Lightroom 5.7.1

    Install and enter your serial number. Serial number Lightroom works on Windows and Mac.

  • Missing files from the Installation of Windows XP disc

    Hello, I got an installation of Windows XP Professional and the installation disc, 3 files are missing, even though I don't remember the name of the files.

    the laptop has been pre-installed with Windows Vista Edition Home Premium and is a Compaq CQ50.

    Hi ragingsoul,

    Missing files on a CD, most likely a bad CD or a bad CD player. Try an another XP CD if the same thing happens, so it's most likely the COR, otherwise it's the CD
    See you soon ~
  • The installation disc could not be found

    I get the same message continuously when I am bootcamp Windows 7 on my iMac mid 2010.

    I have read through the other threads here and searched online and nothing that I don't seem to make any difference.

    I have a iso, tried to burn on an external drive and a FAT format USB key.

    Downloaded the package of appropriate support bootcamp for my system.

    Followed all the instructions on the help page of training camp, but still can't make it work.

    I am gradually abandoned so any help would be greatly appreciated.

    Chrischarge g ' Day,.

    Thank you for using communities of Apple Support.

    I understand from your post, that you have a problem installing Windows 7 on iMac (21.5 inch, mid 2010). I use Boot Camp dual-boot my system as well, so I know that it is important we have this installation problem solved. I have several things for you to try.

    First of all, it's a good idea to make sure you have a recent backup of important data from your iMac. The article below will help ensure that you have a recent backup:

    Use Time Machine to back up or restore your Mac

    Then, I see you are using Mac OS 10.6.6. Let us make sure that you have the latest version of the software installed for this OS (10.6.8). Please try to update by following this path: Apple menu > software update.

    Finally, it is important to respect the requirements and installation steps to install Windows 7 and older versions on your Mac with Boot Camp. The installation steps are unique depending on whether it is a new installation of Windows 7 or an upgrade installation of Windows 7.

    Perform a new installation of Windows 7

    Follow these steps if you install Windows 7 on your Mac for the first time.

    1. Start your Mac in OS X.
    2. Use the tables at the end of this article to make sure that you have a Mac that takes in charge the version of Windows that you are installing.
    3. If your copy of Windows 7 has come on a DVD, create a disk image of the installation disc for use with Boot Camp.
    4. Connect a 16 GB or more large USB flash drive you want to erase. Leave this connected to your Mac, flash player until the Windows installation completed.
    5. Open Boot Camp Assistant in the Utilities folder (or use Spotlight to find it) and click on continue.
    6. Select only the options to create a Windows Setup disk and download the latest version of Windows software Apple support. Then click on continue.
    7. Insert your Windows installation disc, or choose your ISO Windows installation, then click on continue. Boot Camp erases your USB and he prepares for the installation of Windows. Once the flash player is prepared, close the Boot Camp Assistant window to exit the application.
    8. Use the tables at the end of this article to find that Windows supports the software (drivers) you need for the version of Windows and the Mac you're using.
    9. Click on the link in the table to download related software.
    10. Once the file is downloaded, double-click it in the Finder to decompress (unzip) it.
    11. Open the folder that results. Look for the following files in this folder and drag them to your USB Flash drive. When you are prompted if you want to replace the existing items on the flash drive, click Yes.

      $WinPEDriver$ (file)
      AutoUnattend.xml
      BootCamp (folder)

    12. Open the Boot Camp Assistant again, and then click on continue.
    13. Only select the option "Install Windows... or later."

  • Click on install, and then follow the prompts on the screen to re-partition your hard drive and install Windows.
  • When you have completed the wizard, your Mac restarts with Windows Setup. When you are asked where you want to install Windows, select the BOOTCAMP partition, then click on drive Options and format your Boot Camp partition.
  • Follow the prompts on the screen to complete the installation of Windows.
  • Perform an upgrade of Windows 7 installation or an earlier version

    You can upgrade to the existing installations of Windows XP or Vista to Windows 7. You need at least 10 GB of free space on your Windows partition.

    1. Start your Mac in OS X.
    2. Use the tables at the end of this article to make sure that you have a Mac that takes in charge the version of Windows that you are installing.
    3. Download software support for Windows (drivers) bound to the table, or locate the OS X Install or the restore disc supplied with your Mac so rated.
    4. Decompress (unzip) download it and place it on a USB drive formatted in FAT (MS-DOS). Let this flash drive connected to your Mac during installation.
    5. Start your Mac from the version of Windows that you currently have installed.
    6. Use the Windows Installer to upgrade to Windows.
    7. After Windows Setup is complete, your Mac starts in Windows. In Windows, open the file "BootCamp.exe" on your USB stick or the installation disc supplied with your Mac. Follow the prompts on the screen to install the related drivers for your Mac.

    After the driver installation is complete, connect to Windows to start using it on your Mac.

    Have a great day!

  • install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

    having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

    error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

    I managed to install the software on my laptop using windows 7.

    spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

    have tried to install it on the internet from the site of epson, but same error

    any help would be greatly appreciated

    < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
    Do you mean that you have downloaded the Epson driver?

    http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

    Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

    If that wouldn't work, try to run the System File Checker:

    Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
    http://support.Microsoft.com/kb/929833?WA=wsignin1.0

  • Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

    Original title: load error when you try to load Halo 2

    People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

    Thank you for your time in advance.

    Hello

    As you are facing problems with Halo 2, I suggest you to refer the link for better support:

    http://forums.haloonwindowsvista.com/forums/

Maybe you are looking for

  • Game.exe blocks everything as I start the game

    Hey,. Sherlock Holmes against Jack the Ripper game, I installed and when I click play it says game.exe has stopped working or when you insert the real Sherlock Holmes DVD. Pleaaaaase help!

  • Difficulty KB2539636 updated on windows XP installation

    Despite several attempts of system and manual, I can't install the update of security for Microsoft .NET Framework 4 on Windows XP (KB2539636)

  • Quick question on the EQUALIZER custom settings

    Hi, just bought a 4 GB Fuze and I'm liking what I see. A few things have left me speechless, as the customization of my EQ settings. First of all, I'm not at all experienced with setting the sound level, and none of the levels in the custom EQ settin

  • EOP printer should not be default, possible?

    Hello We have activated EOP printer for the userers who access it via the Web portal remotely or at home. EOP printer works fine, when they connect to the default printer home House is also a default printer in the vdi. but when the user returns to t

  • Used los datos del Performance performance

    Hola y buenos dias.me gustaria used a poco mas los datos that da vsphere en el las VM performance.Tengo claro como analizar los datos that da don't con respecto a CPU y Memoria, pero cuando llegó a disc o data warehouses, aqui no se los datos Québec