used to install service pack 2

Similar Questions

• 2012f5 used to install service pack 2

  I have just installed update f5 for LV 2012. I built a program on XP Setup program. Setup fails and requests for service pack 3. It worked and the generation of installation program indicates service Pack2 and above. That's happened?

  I dropped the CAR 429902 document this behavior.

  For now, assume that the XP computers require SP3.

  Please let us know.

• Used to install Service Pack 1 for Vista

  I get to the point if I download the sp1, it starts the installation. It goes all the way up to step 3, and then he tells me after a very long time that service Pack 1 installs recovery of changes. Wondering what to do.

  I thought about it myself. I have McAfee and read somewhere that the update will not take if you have mcafee. So he says to disable anti-virus, firewall and software spies. I have done that and restarted my computer. With disabled McAfee, I was able to install the Service pack. Then I re active my McAfee and everything is fixed. Thanks for your help.

• Windows Vista will not install Service Pack 1

  Hello, I have an Acer laptop that has Windows Vista 32-bit Basic on it.  I did a factory reset on it and started to update Windows.  It says it installs successfully in 30 seconds about, but when you do another search that Service Pack 1 is found as a update and Service pack 1.  How can I fix it?  I tried the fix it tool and still no luck.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Cannot install service pack 1 on Vista

  Hello

  can anyone help?

  I changed the hard drive on my PC and re installed vista. Several updates later and am stuck now with service pack 1 do not install it even if he says he has. Because of the incompatibility of IE 7 with the Microsoft Web site, I am unable to download in stand-alone form or download the tool etc. such as documented on the solutions, I googled.

  There is no antivirus outside Defender running nd tried to install firewall on and outside. No idea what it takes now short of forking out for windows 7 or 8.

  Any help greatly received.

  Hello

  If you encounter problems, you can download the stand-alone version on another computer and save to disk.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• I can not install Service Pack 1 on my Vista Home Premium Edition

  Hello

  I am trying to install on my Windows Vista Home Premium Edition 32-bit Service Pack 1.

  The green bar ends, but there is an error message saying "an internal error has occurred."

  Error code: 0x800703F0

  I don't know what to do, I need to install MS Office 2010 and need service pack 1.

  Please provide opinions on what I should do.

  Alburr

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon

• I can't install service pack 3, I get an error that ntkrnlpa.exe is in use by another application

  I search on the forum and found that another user had the same problem but nobody answered.

  What happened is that I had a few viruses that my computer shuts down completely.  I have simply no money to buy or update of protection against the virus at the moment.  So, my computer crashed.  Then I had to use my system restore disks to restore my computer.  Then, after that I restored my computer now goes to the blue screen and scans files each time.  At the end of the list is a message: unable to write to the boot sector (according to me, it is said).

  Then I accidentally downloaded a virus.  He was disguised as a MS program and was called FixIt.  I couldn't get down there and he asked for credit card information.  I don't give any information and was able to use a browser to display the McAfee, then remove.  Then I used Malwarebytes to remove some other virus.  Not knowing what else to do, I tried to defrag and received an error message that my C: drive has been corrupted.

  My CD Player no longer works and my computer has problems.  I thought that if I downloaded the FixIt problem, it could solve some of the problems it is to have my computer.  It won't work because I have not installed Service Pack 3.

  When I try to intall Service Pack 3, it extracts files and brings me to setupwizard and then gets up to a certain point, and I get an error message as follows:

  c:\windows\system32\ntkrnlpa.exe file is open or in use by another application.

  I don't know what else to do.  I have everything turned off.  I tried to download and save to my desktop and it still won't work.

  Any help would be greatly appreciated!

  When I ran Process Explorer, I have disabled this file ntkrnlpa.exe.  I couldn't tell what was using this file - but I got the Google Redirect virus, so I thought that a virus has access to this file and prevents me from doing anything.  I don't know if that was the case, it was just my guess that it was what was going on.

  It worked for me.  It temporarily disables this file and then you can install Service Pack 3.

  I received instructions on my site quietfish.ca if you want to check.

• Cannot install Service Pack 2 using Windows Vista Home Edition or anything else on the internet.

  Hello

  I tried to download and install Service Pack 2 using Windows Vista Home Edition, or anything like that on the internet without success. According to me, the key word is internet or a block of Vista from the internet to install anything. Many people here get the same error 80070005 for SP2 as I am, but I think that the problem is with Vista, how the system allows any installs or blocks installed from the internet. I suppose that some are able to go through the download process, but installation is where it does not pass through. There are moments where it seems that the installation of SP2 works, but it will fail eventually. Other times what ever happens to the installation process. The same goes for all other downloads and installs from the internet. I am able to install a program that already exists on the computer, so I know that installs works just not the Internet. Do not send me a link to install because it probably won't last through. I may be able to download but installation will not pass by so that the program will not work. I used the words installation and internet a lot for some reason please take account, when responding.

  Thank you

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• Should I install Service Pack 1 if my computer use only for Microsoft Office?

  Question about Service Pack 1 for Windows 7

  Hi, tell me please, need to install Service Pack 1 and the updates, if the computer uses only for Microsoft Office?

  Yes, you should. It solves all the problems of security and stability.

• Need to install Service pack 3 for Vista to download my Zune player

  Just need to install Service pack 3 for Vista to complete my download to my Zune Player...

  Thank you

  LEA Shauna Toenniges

  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  As you can see not SP3 for Vista.

  As you can see, the Zune Player requires XP with SP3 not Vista with Service Pack 3.

  Requirements for the Zune Player-

  http://www.Zune.NET/EN-AU/products/LearningCenter/zunesoftware/gettingstarted/pcreqs.htm

  Microsoft Windows 7 (all editions), Windows Vista (all editions), Windows XP with Service Pack 3 (home, professional, Tablet PC, or Media Center Edition 2005 with Rollup Update 2) or Mac OS X with Boot Camp running Windows 7 or Windows Vista.

  If you use a Windows 7 64-bit edition or Windows Vista, please click here to download the Zune software.

  Software Zune will not work on versions of Windows prior to Windows XP SP3, all the versions of 64-bit of Windows XP or any version of Windows Server.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Vista - Code error: 0X8007007B (cannot install Service Pack 1)

  I'm running Vista Basic; I have not installed Service Packs. When you try to update, I am able to download the packages, but I can't install them. After a few seconds, I get an error:

  An internal error occurred during the installation of the service pack.

  Error code: 0x8007007B

  What does that mean? And how to fix it?

  Hey Laurent,.

  Suggestions from the Microsoft Knowledge Base article below may be useful for obtaining the installation completed successfully.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 64-bit Vista will not install service pack 2

  I'm running the 64 bit version of vista buisness. I tried to install service pack 2 using the automatic update, but it has not installed. I also tried the manual download. He gets to halfway done installing, then gives me an error 0x800f081f code. He told me to install the system update readiness tool. I tried to install it, but that no longer works. Not even done a selective sartup with everything disabled except for windows services works.

  Hi relik_66,

  I suggest that you check your system for corrupted files.  You use the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:

  1. open an elevated command prompt. To do this, clickStart, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  2. type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Should I still had windows updates after installing Service Pack 3 on Wndows XP Pro

  I need my latest updates I installed after installing Service Pack 3 on windows xp pro? Because I'm trying to use less memory as possible, and I like 2 gigs of updates before I installed service pack 3. So I can go and remove the latest updates, or should I be?

  See this discussion, Thomas: http://aumha.net/viewtopic.php?f=62&t=33827 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The brightness of the display function is not after installing Service Pack 2

  Hi, I had installed Service Pack 2 as recommended by the window update (my laptop is HP DV5 series). After installation, my screen resolution has changed and so I put it back to normal. But the strange thing is, I can't change the brightness of the screen by clicking on Fn + F keys that I've always done. The function to change the brightness in the power option is too much missing.

  Problem is solved after I restore the window. FN + F keys work, and re-emerged the brightness option in the Option to. The problem is, should I go for the new update that remind me of in the update of the window? Thank you!

  Hi all

  I suggest that you download and install the latest version of the software of the manufacturing.  Software installation utility your function keys should work again.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.