User accounts missing after restoring the system.

Similar Questions

• Can't see the data partition after restoring the system

  Hello.

  I had installed Windows 7 on my computer and I had two operating systems of windows operating system. And I wanted to boom volume but I couldn't and I downloaded a program and crashed my both operating systems. And after that I used the hp recovery cd use cmd, System Restore. And after that, I got all the workers. But now I can't see my data partition. I can see the computer Manager, but I can't access it.  Please help Microsoft. :(

  Is the partition on the same drive as Vista?  If so I would try to extend the Vista partition to include the space in this partition "missing."  Maybe this process will add space on your system drive, and at least you will have access to it (even if it is not a separate partition that you wish).  I don't know if this will work if the system is not seen as a partition, but I guess it's worth a try.

  After that, my only suggestion is to backup your data and do a clean boot from the drive and format the drive and reset the partitions in the installation process.  This should solve this problem.  I wish I had a less drastic recommendation, but honestly, I know of no other way to solve this problem (if it does not solve the problem).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Archive Lotus Notes stored in the folder user APPDATA missing after recreating the profile. This folder can be recovered?

  Hello
  I have a user who has received a record of archive Lotus notes in his file to User\username\Appdata.
  Due to some other issues, we have rebuilt his profile and archive this folder disappeared.  Is there a tool or a way to recover its APPData folder (it was today) or is it gone?

  Not available in the Notes, as far as I KNOW.
  You may need special tools Lotus Notes Repair Kit to restore the file, if it is possible at all: a database Notes, when poorly managed, is easily corrupted. Missing a block and the file is irreparably. http://www.LotusNotes.repair/

  Next time, do a backup before doing something drastic... Maybe something about an old backup?

• I can't access the folder of "OWNER" in a "MY BACKUP" folder after restoring the system with a backup.

  I did a restore of the system a couple of weeks.  I have an emachines with AMD 64.  I chose the backup option which programs, files, etc., placed in a folder "my backup".

  I tried to find photos and music in the folder, but I could only access the music folder.  When I try to go further in the folder, I get in the 'owner' folder but a message box appears and says that I don't have access to this folder.

  I am sure that my photos are of him, but I need to be able to access the folder.  How can I change the settings so I can access?

  Try "taking possession" of this file...

  "How appropriate a file or a folder in Windows XP"
    <>http://support.Microsoft.com/kb/308421 >

  HTH,
  JW

• Mail missing after restoring the messaging profile folder

  Hello, I had problems with my file sent and had to restore my profile folder to an old copy of 3 day, but after that my Inbox is missing mail for 16 days, the mail is extremely important because it contains all my orders and working material and I need a way to recover. Please help me! At the moment there is no earlier version or which folder to restore once I open his options on the file to the Inbox, what do I do now?

  restored what and how is the first question. If you mean windows restore, I'm from here. It's a mess of Microsoft, with that I want nothing to do.

  The only constant I can suggest is the right click on the folder in Thunderbird, select Properties, and then store the button fix to force a re-indexing of mail.

• Impossible to reinstall AVG after restoring the system, error message "search DNSSERVER order (failed).

  Original title: The failed messages system problems

  Tried to reinstall AVG Internet Security after that system restore and now I can't install it.  I got the error message and when I checked for problems that help control (failure) research saysDNSSERVER?  I also had a message that failed on a mail server.

  Hello

  1. What is the exact error?
  2. This only happens when you install AVG?
  3. what mean you exactly by "a message that failed on an e-mail server achieved."?

  I suggest you to run the Fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
   

  Reply back with more information to help you solve the problem.

  Hope this information is useful.

• updates to Windows 8 missing after restoring the backup

  After the restoration of a drive under windows 8 from one backup windows, all my updates disappeared and updates history

  and white poster installed updates. Fix update being used, but no use.

  Are updates installed without the package leaflet or they lack and how does it work

  using the backup disk image?

  Hello

  Thanks for the reply.

  Although this type of backup includes your personal files, we recommend that you back up your files regularly using Windows backup so that you can restore files and folders according to individual needs. When you configure a scheduled backup, you can choose if you want to include a system image. This system image only includes the drives required for Windows to run. You can manually create a system image if you want to include additional data drives.

  Important: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Thank you.

• Re: WIRELESS does not work after restoring the system to the factory settings

  Hello

  I just had to reset my Toshiba Windows 7 laptop to factory settings, I backed everything up to an external hardrive beforehand. After the process that kept restarting my laptop on its own, he did this, while the default Toshiba program was missing (from the application of the box). He said not to interrupt or turn off the PC while it was running, but I couldn't stop it do it several times. The process finally ends the green bar hit 39/39 and let me come back to the office.

  It seems to be OK now, but I can't get online, I have connected to my wireless router and it says connected with an excellent signal but I can't do anything on Internet Explorer. I would like to re - download a few things such as Adobe Flash Player, AVG Free, Mozilla Firefox but can't even get anything. It's not even an error message that appears when I'm on IE.

  Can someone help me please?

  Tommy

  I hope that you can use your laptop by using the LAN connection.
  Have you tried to reboot your router?

• After restoring the system Pavilion dv7-4090 ca with Windows 7 will not play blu - ray movies.

  has worked before system restore now it shows only a white screen

  Hello

  If you use HP MediaSmart DVD to read Blu - ray disc, try the following.

  HP now provides a version of PowerDVD 10 Cyberlinks which seems to be a better solution.  Download the installer for it on the link below and save it to your desktop.

  FTP://ftp.HP.com/pub/SoftPaq/sp53001-53500/sp53029.exe

  When the download is complete, open windows panneau Panel configuration, open programs and features, right click the entry for HP MediaSmart DVD and select uninstall - once this process is complete, restart the laptop.

  When windows has reloaded, double-click the installer for PowerDVD 10 start the installation.  Once this done, see if your Blu - ray disc now plays OK.

  Kind regards

  DP - K

  

• Windows Update does not work after restoring the system

  HP Compaq 6000 Pro, bought in early 2011. Windows 7 32 bit. I recently did a factory restore to return to a clean system using factory restore partition. The restoration seems complete ok, and I have a Windows 7 clean and functional configuration.

  However, the Update window will not work (and of course, it is now quite an old installation of Windows 7) it comes up with the Red Cross and the message "Windows Update cannot currently check for updates because the service is not running." Other notable issues that may or may not be related are: Windows Defender won't start not (0 x 80070564). HP Support Assistant reports it needs to update, but the update fails (because then it just says: it should be updated again)

  What I've tried so far:

  Verified that the BITS and the WU services are both actually run

  Uninstalled the McAfee antivirus software

  Tried to install Windows 7 SP1 directly (happens with "catastrophic failure")

  Tried Windows Update (wusa.exe) stand-alone installation / WU Readiness tool-fail (Oxc8000247)

  MS difficulty he said Troubleshooter it corrects problems, but nothing changes later

  (In short, tried all suggestions from MS support)

  It drives me crazy - any help will be appreciated!

  ISO should work, just be sure to download the version of Pro 32-bit.

• Restoring Backed-Up files after restoring the system (Vista)

  I supported are recommended and then restored a complete system.  Now I can't get Vista to recognize my backup?

  Hi RWaskul,

  What happens when you try to restore your backup? This error message that you receive? What measures do you take? If you experience any of the problems described in this document, all the troubleshooting steps listed.

• After restoring the system, I get the error message "Hasp SRM run-time environment (H0033)" during the installation of the software that I downloaded.

  Original title: software download

  I did a restore on my laptop and had to re - install software.   He downloaded without problem, but now it doesn't let me open - error message is 'Hasp SRM run-time environment (H0033) can anyone tell me what it is and how to fix it.   I already ran a "solution" to the problem and it did not help.   This software has no problems prior to the restoration.

  Hello

  This error occurs when the 'HASP License Manager"service no longer works correctly, stopped or not allowed in your environment. Before you continue with the troubleshooting steps, I would like to know some information about this problem.

  1. what security software is installed on your computer?

  2 What problem confined to a specific software or with any other software?

  3. are you referring to the resolution of problems by running to solve the problem?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Make sure that the HASP License Manager Service is started. Try the following steps to check whether the service is started or not.

  a. press Windows + R keys, type Services.msc and press enter.

  b. Locate the Hasp License Managerservice.

  c. double-click the 'Hasp License Manager' service and check if the Start button is grayed out or not.

  d. If the Start button is gray, then click the Start button to start the service.

  e. click on apply then Ok to save the changes.

  Method 2:

  If you use a security software and firewall on your computer, then try turning it off temporarily and check if the problem persists.

  Note: Antivirus/firewall software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus/firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Please reply with the status of the issue so that we can better help you.

• I deleted several accounts of users, but after that I have restart the laptop all user accounts have been restored?

  I deleted several user accounts and need to restart to changesw can take effect, but after that I have to restart the laptop then all user accounts have been restored?

  Hi GhettoBoy,

  How do you delete user accounts? Is it just C:\Dosument and settings users or accounts under the control panel? If you don't want to keep all these account data, you can try to delete the profile of click Start-> settings-> Control Panel-> system-> Advanced-> user profile and select the profile and remove. Also check under 'User accounts' in the control panel to remove the names of users.

  I hope this helps.

• After restoring image system, content of the disc do not match

  I feel like every time I think I have this darn computer fixed, another problem appears...

  Okay, so after much headache, I was able to restore the Boot Camp from a virtual hard disk image... however... what OSX sees the contents of the drive BOOTCAMP and what BOOTCAMP sees self are completely different.

  According to OSX, here is the content:

  Kenz$ ~: cd/Volumes/BOOTCAMP /.

  Kenz$ ~: ls

  $Recycle.Bin / program Files / users /.

  BOOTSECT. BAK program files (x 86) / Windows /.

  Start / ProgramData / WindowsImageBackup.

  DRIVERS / RHDSetup.log* bootmgr *.

  Documents and Settings / recovery / hiberfil.sys*

  Intel / Recovery.txt* pagefile.sys*

  PerfLogs / System Volume Information.

  What the reader was like before restoring the system's yet OSX still think it's what's on the disc...

  Seen on Windows, for comparison, here is the content:

  Directory of C:\

  06/10/2015 AppleBcInstaller.log 58 14:45

  the 4 528 09:08 app_updater.log 19/04/2016

  02/02/2015 10:19 < DIR > Autodesk

  03/01/2015 19:41 < DIR > Intel

  2009-07-13 22:20 < DIR > PerfLogs

  12/11/2015 15:02 < DIR > PhSp_CS2_UE_Ret

  11/07/2016 17:44 < DIR > Program Files

  15/07/2016 15:37 < DIR > Program Files (x 86)

  15/07/2016 11:58 < DIR > regbackup

  10/15/2015 RHDSetup.log 2 058 19:13

  04/01/2015 18:47 < DIR > Sandbox

  03/01/2015 17:13 < DIR > users

  22/07/2016 15:48 < DIR > Windows

  3 file (s) on 6 644 bytes

  10 dir 66,776,281,088 bytes free

  In my view, that is a problem OSX, as I need to reset the memory of the BOOTCAMP volume or something.

  I disassembled that re-mounted disk, reset the NVRAM/PRAM memory disabilities Tuxera NTFS... but it shows again that content.

  Any ideas on how to solve this problem? While I could leave it alone since the OSX and Windows and start properly, I would create an image of WinClone of Boot Camp, and in this situation, it would probably be to create a picture of the wrong thing, then I would like to than OSX to see the disc properly. The determining factor here is I would like to take advantage of the free upgrade to Windows 10, but I want to be able to roll back to where I was in the worst case scenario.

  On the side of OS X, you disassemble and reassemble the Bootcamp partition? Tuxera can complicate and lead to corruption.

• After "critical update" 12/23/11, my computer is very slow and crashes, also will restore the system.

  After the "critical" update that is installed on my computer 12/23/11 my computer started running very slowly, he drove my Norton anti virus, blocking, I am unable to restore the system. any ideas?

  Hello

  1 update you installed recently? (Please mention the number of KB)

  2. which version of the Windows operating system is installed on your computer?

  3. what exactly happens when you try to perform the system restore?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Fix Windows system on slow Windows performance issues:

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  Start in safe mode and check if the same problem persists. If the problem not persists in safe mode, then turn on the computer in a clean boot state and check if that helps.

  Step 1:

  How to start in SafeMode in Windows 7: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Step 2:

  Put the computer in a clean boot state, and check if that helps.

  How to solve the problem by running the clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Check the installation update and try to remove the updates that you installed recently and then try to remove it and check if it helps.

  Remove an update:

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  And also ensure that there are no pending restart, if there are any pending restart, then restart the computer and check if that helps.

  Hope the information is useful.