User not DBA trying to access the binary sqlplus: AIX

Similar Questions

• can I set up parental controls for a user not being able to access the internet to all___parental controls

  is it possible to disconnect a user on the internet

  Hello

  See this and the 'related links '.

  How to install and use Parental controls in Vista
  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  and these:

  Setting up Windows Vista's Parental control
  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Set up Parental controls
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Trying to access the camera Pentax Optio S, getting a "the drivers for this device are not installed. (Code 28) »

  Trying to access the photos that are on my camera, not on my drive of camera memory.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you to follow the links and check out them.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  If you use windows7, I suggest you follow the link and check. Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Device Manager error code 28: Troubleshooting

  http://support.Microsoft.com/kb/310123

  Note: Applicable to Windows 7

• five out of six times (approximately) to start outlook express 6, it crashes while trying to access the first message

  five out of six times (approximately) to start outlook express 6, it crashes while trying to access the first message. This happens several times, and each time the first message (even) appears in the Inbox, even if the process is not complete. sometimes clear the cache, or cleaning IE temp. the files seems to help - but not always.

  It's VERY frustrating!

  Do a household.
   
  1: do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  2: after you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  3: disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3
   
  For some programs, turning it off is not enough. You may need to uninstall and reinstall in custom Mode and remove the analysis when e-mail messages.

• I'm trying to access the functions tells me windows explore stopped workingI

  original title: Explore Windows crash

  Unable to access any windows especially update function, which is where I am responsible for the problem. I'm trying to access the functions tells me windows Explorer has stopped working

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Trying to access the electronic books in the library of our audience. Downloaded the software, but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.

  Trying to access the electronic books in the library of our audience. Downloaded the software, (Overdrive Media Console) but I get an error saying: the current version of the security of MP's 2.5.0.0 and I need 2.5.0.1. How to do only what I can read ebooks? People have suggested using IE, but I prefer to much HELP Firefox!

  Try to update the media player while using Internet Explorer. Windows Updates site uses ActiveX to perform "duties. Firefox does not support ActiveX.

• I have an error was encountered trying to access the battery

  I have an error was encountered trying to access the battery

  Hello

  There seems to be several users facing this problem with HP laptops.

  If you use an HP laptop, please see the following thread.

  an error occurred trying to access the battery - Microsoft Answers:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/an-error-was-encountered-trying-to-access-the/5c4f34b5-9f8e-4509-9560-96e60720e24e

  Let us know if that helps.

  Concerning

• Application module tries to access the secure API

  Hi all.

  We are new to Blackberry Java development and have some problems with it.

  We use the same BlackBerry Bold 9000 and OS worm Simulator. 5.0 in Eclipse JDE.

  The JDE version is 5.0.0

  We signed HelloWorldDemo with tool of power, provided by BB. It worked fine on the Simulator AND the device.

  Then we signed our own application, based on PictureScrollFieldDemo.

  The thing is, on the simulator of OUR application works fine, but when we try to run on the device, it failed with an error that says something like this: "Application module tries to access the secure API."

  After that many times we tried to remove the code all potentially dangerous and recompile the application. After that it stopped working at all (when you click on the application menu, ABSOLUTELY nothing happens).

  Then, we decided to try to launch PictureScrollFieldDemo, the sample provided by BlackBerry. Also, it did not work

  Finally, the HelloWorldDemo has stopped working or the other...

  During all this madness, we rebooted the unit several times.

  Please help, appreciate any advice.

  Thanks in advance, geezmo.

  You should have received 3 keys, RBB, CPR and RRT. You imported all 3 when you have been setting up the signature tool?

• Blocked ConnectionFactory: trying to access the api.

  Problem:

  1. my application uses the ConnectionFactory class for 5.0.x and 6.0.x platforms.

  2. one of the testers reported that the Bold 9700 v5.0.0.169 (Platform 5.1.0.30), it cannot start application. Shows applications message " Application trying to access the api blocked ' where is the name of the application. Also, Tester reported that the previous version of application (where ConnectionFactory served) starts correctly.

  3. I'm sure asking signed correctly, because I was able to install it on several Bold 9700 DeviceAnywhere devices. The only difference I found is that these devices have v5.0.0.174 (Platform 5.1.0.146).

  Can anyone confirm that this is a bug in the previous OS 5.0.x? Is it okay for me to suggest the update of the device to the customer?

  How the application has been installed?  If they use the WAP browser, read on...

  The JAD file used during the download of applications using the Explorer lists the COD file sizes.  These are the sizes previously signed, which tools do not update after signatures have been applied.  In most cases, this won't matter, but some WAP Gateways carrier truncates the COD file based on the size specified in the JAD file, which cuts the signatures for the application.

• Windows cannot access file you will not have permission to access the item path or specified device.

  Windows cannot access file you will not have permission to access the item path or specified device.

  I have windows7 OS, I try to open any application above the display of error messages.

  Please help me...

  Thank you!!!

  original title: Windows cannot access

  another user account works fine.

  Then, your profile is corrupt.  Create a new user, copy documents and other profile corrupted on the new profile.

  Do not copy * all *-only things you have created.  (Except the shortcuts).

  Is the user profile damaged an administrator or standard user?

• Help - LI running, but get Apache2 Ubuntu default page while trying to access the Web interface of log insight

  Hello

  I installed the Log Insight 2.5 VM via vCenter Server ESXi 5, 5. I was able to deploy the virtual computer successfully and you can see the network through VAPP Options settings. (Attached picture - TIME settings).

  Question:

  Unable to access LI web Interface. While trying to access the Web interface, I get 'Apache2 Ubuntu by default Page' (img attachment). Insight of the newspaper runs and opens the web application on port 80.

  Newspapers, controlled far-

  status of /etc/init.d/loginsight

  Open a session running Insight

  Attached image Loginsight2-DURATION - file /storage/core/loginsight/var/runtime.log

  # sh li - cassandra.sh - status

  SH: li-cassandra-sh: not found

  Check if the tcp 80 port is open through the netstat command. Yes, it is open.

  Telnet on port 80, it says connection and crashes. Image attached - telnet-LI

  Able to ping the IP address successfully.

  How can I check http logs on console LI?

  I would really appreciate response to this soon. I'm working on installation LI for more than a week and struggling to get through this way.

  Thank you

  Radhika

  I believe that you with the configuration, but I tell you that the configured IP address and the IP you hit in your browser are not still the same IP, Log Insight does not work on Ubuntu, so you hit another system. To prove this, connect you to the console of the Insight newspaper and run:

  # cat/etc/SuSE - release

  SUSE Linux Enterprise Server 11 (x86_64)

  VERSION = 11

  PATCHLEVEL = 2

  You will see that you are running SuSE to see a Ubuntu screen tells me that you have an IP address duplicate in your environment and you hit a node that is not an Insight newspaper. I hope this helps!

• an error occurred while trying to access the server

  an error occurred while trying to access the server, I get this message when you try to convert, what's the problem, the user of windows 7

  Hi Laura,

  It looks like you can try to access one of the services of Adobe Document Cloud in Adobe Reader. If so, please close the session, and then reconnect.

  If you're still having problems, please try to connect via the web interface at https://cloud.acrobat.com.

  Let us know how it goes!

  Best,

  Sara

• an error occurred trying to access the service

  I wonder why I bought a year subscription to Adobe Reader to convert PDF files to Doc files, when it WORKS and no one seems to be able to help me! I'm on a Mac Book Pro with Yosemite (do not upgrade it slows down your Mac evil) and whenever I try to convert a pdf file to a doc I get "an error has occurred while trying to access the service", can someone help me please?

  Hi Cedric,

  The customer service number is 800833687

  Is the direct link to chat: http://adobe.ly/19llvMN

  You must click on 'Still need help' to start the chat session.

  You get this error: "year error occurred trying to access the service", all trying to access the service by the reader.

  Try to use the link: https://cloud.acrobat.com/exportpdf log in with your Adobe ID and try to convert a pdf file to doc and check if it works for you.

  Agress,

  Rave

• ExportPDF - "year error occurred while trying to access the service.

  I've never had a problem using ExportPDF in the past, but recently, I get an error message saying "year error occurred while trying to access the service.  I am using the same browser, Chrome, I've always used.  Please tell me how to solve this problem.

  Hi metal_anthropo,

  Please log and clear the browser cache and then reload https://cloud.acrobat.com. If this does not work, please try to connect by using a different web browser (just as a trial).

  Something has changed on your system as you were last able to connect to Acrobat.com? You use Mac OS or Windows?

  Best,

  Sara

• I'm trying to access the selected value of a group of radiobutton Error #1006

  I'm trying to access the selected value of a radiobutton group, but when I do it like this:
  
  Debug.Text = radiogroup1.selectedValue (m:System.NET.SocketAddress.ToString ());
  
  I get an error like actionscript:
  
  TypeError: Error #1006: value is not a function.
  hand / debug1 () [Z:\mysite.co.uk\Staff\src\main.mxml:47]
  hand / ___main_Button2_click ([Z:\mysite.co.uk\Staff\src\main.mxml:372])
  
  No help from friendly people? ;-)

  Debug.Text = radiogroup1.selectedValue.toString ();