User profile lost / unable to boot to the desktop after installing KB969947

Similar Questions

• Not possible to boot from the CD after installing Win XP on Tecra A3

  Hi all

  I can't boot from the CD more? I tried following things:
  -J' used several CDs to boot from, such as Windows XP, other CD CD WinXP or UBCD (ultimate Boot CD) and others to boot from.
  -J' chose in the start menu and the Bios first, the CD player must be started from.
  -Disabled the HARD, the LAN and the FDD drive so that only the CD must be started from, nothing else.
  -Press F12 after start-up und selected CD to boot from.
  -removed the battery
  -removed the disk drive HARD that the CD is only peripheral to start.
  -No available recovery disk.
  * Result: Always at top left corner a cursor flashing on a black ecran.*

  My story to this problem/question.
  -J' reinstalled Windows XP after the system became slow, with SP2 and SP3.
  -During the installation of SP3 and at the same time other pilot the system crashed.
  -Pressing F8 after starting, I can choose the Options to win.
  -System running days, several days without any reaction.
  -Sometimes, it goes into "secure mode" and freezes, no entry or possible reaction.

  I want to install Windows XP again from the CD and a clean version to work on.
  That means no two were leaving to work on alone.

  Can someone tell me why the CD player is with any media ignored inside and no departure from them is possible?

  Thanks for your help

  A strange question what s
  I put t know, but you did an update of the BIOS? Try it!

  Moreover, what laptop Tecra A do you have?

• Unable to connect to the internet after installing updates

  Original title: I can't access the internet after running the latest updates! Please notify.

  I can't access the internet after you run the last update! Please notify.

  Hello

  1. What is the error message that is disayed when connecting to internet?
  2. what type of internet connection do you use?
  3. Please post the KB number that was finally installed update.
  Please follow the links below to elp solve the problem.
  Method 1
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2
  Start the computer in start mode minimum avod conflicts with third aprty software.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
  Note: When you have done all the troubleshooting steps, follow step 7 of the article mentioned above to start the computer in normal mode.
  You can run this tool and display the results.
  
  Internet Connectivity evaluation tool
  
  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx
   
  Method 3
   
  Step 1
   
  Start in safe mode with Networking if you have awired connection and troubleshoot completed the question.
   

  Description of the safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/what-is-safe-mode

  Step 2

  a. turn off your antivirus software and firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  b. disable your firewall
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps.

• Unable to connect to the internet after installing Windows 8 Pro

  I installed Windows 8 Pro on my laptop, but I can't connect to the Internet. When I diagnose the problem, it can not find the problem. I use a computer dell laptop. The notification on the corner of the Office says I'm connected. I use a wifi that works fine as I can connect my iPad with it. Can anyone help?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you can not connect to the Internet after the installation of Windows 8 Pro operating systems. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error code or message?

  2. what web browser do you use?

  3. don't you try to connect to a wired connection?

  4. What is the Dell laptop model number?

  Please follow the methods and mark the question below:

  Method 1:

   

  Step 1:

   

  Start the computer in safe mode with network and check if the problem persists by following the link below.

  Start settings for Windows (including safe mode):

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  If the problem does not persists in Mode safe mode with networking, and then perform a clean boot.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
  http://support.Microsoft.com/kb/929135

  Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

   

  Method 2:

   

  Follow the steps in the link below.

   

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Method 3:

  Follow the steps described in the links below.

   

  Why can't I connect to the Internet? :

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-Internet

   

  A Wi - Fi & networking:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-Internet#1TC=T1

   

  For reference:

   

  Connect to the Internet:

  http://Windows.Microsoft.com/en-us/Windows-8/connect-to-the-Internet

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Unable to connect to the desktop after the Vmware tools update

  Hey guys,.

  I have problems with a Samsung PCoIP device if it refuses to connect to the virtual machine windows 7 since vmware tools has been updated

  I know very little about vmware view, when he tries to connect it connects to the server vmware view, swimming pool and looks like it is going to connect, but all I get is a black screen, then turned to the login prompt

  The PCoIP device can ping the virtual machine

  I can connect to the computer via RDP virtual

  VMware View version 4.6.0 build-366101

  Any help would be great

  The VMware tools install probably brought to light the specific video driver for VMware view. Try reinstalling VMware View Agent and be careful on the VMware Tools updates.

• How to get all the icons on the desktop after installing xp

  After installation of xp only recycle bin makes its appearance. How to get all the other program on the desktop icons?

  Like internet explorer, my computer...

  Hello

  How to create a shortcut on the desktop?

  If the item is located in the start menu:

  1. click on start. The start menu appears.

  2 find the item that you want to create a shortcut. If the element is in a submenu of the menu, go to the submenu.

  3 right click on the element. A context menu is displayed.

  4. click on send to. A submenu appears.

  5. click on desktop (create shortcut). XP creates a shortcut to the item.

  _____________________________________________________________________________

  Here is the vista forums

  Try the xp forums at the below link for any other question of XP

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Folder on the desktop after installing Photoshop Elements 12

  I downloaded and installed Photoshop elements 12 and it works well. However, it is still a floder on my desktop called Adobe Photoshop elements 12 that contains 307 files and 144 foldes and takes 1.35 GB of space. On my drive C the Program folder files, there are 2 records related to Photoshop elements 12: is called items 12 and it contains 3960 files and 200 records; the other is called Photoshop elements 12 and contains files of 2611 and 232 cases. I guess it's these 2 folders under Program Files which contain all the necessary work files for Photoshop elements 12.

  Delete the folder on the desktop to retrieve the 1.35 GB of space?

  Tom Ayres

  Hi Tom,

  Yes, you can remove the folder on the desktop as I guess this is the configuration file. I would say that to remove folder keep somewhere safe in the future if you want to reinstall so you don't have to re-download the entire product.

  Kind regards

  Abhijit

• Laptop HP 1327TU 1000, unable to boot from the cd to install windows 7

  HP 1000-1327TU notebook PC running windows 8 (64-bit) chinees.

  in fact, my brother bought the laptop HP 1000 in China and me good, it runs in the operating system of language chiniess.

  IAM unable to change the language to English, so I decided to uninstall win 8 and install win 7 .but unfortunately it's not starting off of the cd,

  can someone help me how to install win 7 in this laptop

  Hello:

  To boot from a CD/DVD, you must change some settings in the BIOS.

  Please read the info on the link below for what...

  http://support.HP.com/us-en/document/c03736054

• Unable to boot to the desktop does not work auto repair

  I recently updated my windows 7 to windows 8 and now the PC is stuck in a loop of auto repair of windows 8. The PC does not the same page and there is no way to start the PC in safe mode (as you can when you get a virus). The repair just doesn't work.

  I have read various other forums (and it seems that this is a common fault) and I tried all the things suggested on the command screen but none of them work.
  Anyone know how I can fix this without losing my personal data - I have over 10,000 photos on the PC and do not want to lose any of them. So I really don't want to uninstall it and wipe the data.
  Help, please!
  Thank you

  Separated from the:

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-stuck-in-automatic-repair-loop-help/456ca2a5-e9c2-4197-9087-a179384e92e7

  Andrew B. salvation,

  Thanks for the reply with more information.

  We have of Windows 8 installation media or create an installation media.

  Once you have the disc, follow the steps above and try to rebuild the configuration Data (BCD) start.

  Note: If the computer is newly purchased, it would be preferable to contact the computer manufacturer to address this problem. (If during the warranty period).

  Here are some measures that could help solve this problem.

  I suggest you to rebuild the BCD (Boot Configuration data) fromcommand line and check if that helps.

  1. Insert the installation of Windows 8 media and start the computer using the disc.

  Note: You will need to consult the computer manual on how to set the CD/DVD drive as the first boot device in the BIOS.

  2. Once you start using the installation disk of Windows, on the installation of Windows 8 window, click on repair your computer.

  3. click on Troubleshooting and Advanced options. Select command prompt. Enter the following commands to four in the command prompt.

  Bootrec /fixmbr
  Bootrec /fixboot
  Bootrec /scanos
  Bootrec /rebuildbcd

  Once the order is complete, restart the computer.

  Hope this information helps.

• Unable to connect to the Internet after installing Windows 7 Ultimate

  Hi, I installed a new Solid State Drive and with it, a new copy of Windows 7 Ultimate.
  
  The original HP Pavilion Slimline s5-1114 supplied with Windows 7 Premium. After installation, I was able to install these drivers HP:
  
  57372 - management Engine Interface

  57417 original Driver Chipset

  58919 HP Support Assistant

  65305 - Diagnostic hardware PC

  However, the computer gave me an error for these drivers, claiming that my system did not meet the minimum requirements:
  
  57359 - network controller

  58084 - wireless Controller

  59644 USB Controller

  57493-

  57506-

  57362-

  Any suggestions on getting this computer connected to the internet? Right now I am trying to connect via a cat5 cable, and then once it's upward and running, maybe a wi - fi connection. One step at a time...

  You are the very welcome.

  OK, if your model is not a wireless card.

  Need you these two devices what to consider?

  These drivers should work...

  Ethernet:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-97536-1&cc=us&DLC=en&LC=en&OS=4063&product=5157057&sw_lang=

  PCI Simple Comms:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-105636-1&cc=us&DLC=en&LC=en&OS=4063&product=5265252&sw_lang=

• Unable to connect to the internet after installing the update.

  Whenever my computer downloads this update I can't connect to the internet.

  A security update cumulative for Internet Explorer 8 for Windows Vista (KB980182)

  If I uninstall it I connect without a problem.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to the internet after installing the xp of origin on a new hard drive.

  I get the message not connected area. I know that the connection is ok because I ask this question on another computer using the same ethernet cable.

  Hello

  Hold down the Windows (between Ctrl and Alt) key and press the Pause break key. What is stated in the "system:"section (specifically looking for anything that tells you what is your level of service current pack, which will be either 1, 1, 2, 3 or nothing shown)? "

  Second, please do the following...

  • Click Start
  • Click on run
  • Type devmgmt.msc and press ENTER, this will open Device Manager window
  • Enlarge (click on +) on the section network cards - what is listed?
  • Similarly, what is listed under other devices?

  In addition, indicate the mark, the serial number and model of your PC, or if it is a custom build, of the brand and model of your motherboard.

  I suspect that you have missing drivers after re-installing. These will be available on the PC or motherboard manufacturer's Web site. You may have received a driver CD with the PC that would also contain the drivers.

  Tricky

• Unable to connect to the internet after installing Microsoft Essentials.

  Can't get internet, limited or no connectivity, have no file netbt.sys, how to find, download and reinstall the new netbt file

  need help, loss of internet access after you download microsoft essentials and, now, after more research cannot find the netbt.sys file

  Hi Ben,
  Follow these instructions to fix the NetBIOS over TCP/IP (NetBT) Service:
  Download netbt.reg and open it. Click Yes , and then restart your computer.
  Let me know the results.
  Brian

• Cannot boot to the desktop after Windows Update

  Original title: windows vista startup

  I recently downloaded IE9 to my laptop and updates of windows (prereqs) now my laptop does not open in Windows, when I turn it on, it also says start windows repair but all I get is a blank desktop with a bar and microsoft Corp. under any suggestions

  Hello

  Try to follow the steps in this link and do a system recovery: http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7 (steps are also applicable for Windows Vista)

• Libraries are unable to synchronize on the desktop after the installation of the application of the CC on an iPhone6

  The CC app for the iPhone is amazing. I especially like the feature of libraries; It makes it easy to work comp in a meeting or on the fly. Now my libraries appear on my iPhone and will not sync to my desktop.

  What is the cause of the failure of the synchronization?

  Adobe support helped me to stop all processes from Adobe and to relaunch the CC. It worked like a charm.