"Userinit logon application has stopped working".

I have Vista Home edition Prem, and be recetnly when I start the computer, the ERROR "Userinit logon application has stopped working".  There is a similar question to this topic, but it was useless.  Assistant would be appriecated.

Thanks

Hi Marcosball21

Welcome to the Microsoft Vista answers Forum!

This problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

I suggest measures are:

Start the computer in safe mode and try to make these changes in the registry:

Important: The instructions below contain steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

http://support.Microsoft.com/kb/322756

1. how to back up and restore the registry in Windows

i. log on the computer as an administrator or by using an account that has administrative permissions.

II. start the registry editor. To do this, click on start to reduce this top, type regedit in the search box and press ENTER.

III. click on continue.

IV. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

v. in the right pane, right-click Userinit, then click on modify.

VI. in the value data box, type drive: \Windows\System32\userinit.exe and then click OK.

Note The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

VII. close the registry editor.

Link check: when you try to log on to a Windows Vista-based computer, briefly, you receive the "Welcome" message, and then logged on http://support.microsoft.com/default.aspx/kb/929825 if you are unable to start the computer in safe mode and then start from the Vista DVD and the Editor window registry opened the command prompt. Follow the steps

i. Insert the VistaDVD Windows and restart the computer.

II. When you receive the following message appears, press a key:

Press any key to start from the CD or DVD.

III. define the following preferences and then click Next:

o language to install

o currency and time formats

o keyboard or input method

IV. click on repair your computer and select the operating system you want to repair, and then click Next.

v. in the recovery option, select command prompt

VI. in the type of command line in Notepad

VII. in Notepad, click file, select open

VIII. Select drive c:

IX. Select all files

Select Select regedit Windows x.

XI. right-click regedit and select open

Back up the registry and follow step 1

Hope this information is useful.

Let me know if it worked.

All the best!

Thank you, and in what concerns:

Samhrutha G S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • "Share" feature in the Finder (or other applications) has stopped working.

    Use OS X El Capitan on a Mac Book Pro, the function in the Finder (or other applications) has stopped working "share."  From the Finder, I select a file and to 'Share', select say "Mail", nothing happens. Even when selecting other sharing options such as 'Notes', etc.  He used to work.  Now it is not.  In system preferences > Extensions all the sharing options are regularly controlled.  The same problem occurs in other applications such as Photos.  Selection of a photo and trying to "share."  Nothing happens, the application crashes. Does anyone have a solution?

    The Share button shows 'No. Service' or missing menu items?

    https://support.Apple.com/en-us/HT203129

    If this does not help, backup the computer and reinstall OS X El Capitan of OS X Recovery.

    https://support.Apple.com/en-us/HT204904

  • Cannot use DVD BD Player: WIN DVD MFC application has stopped working

    Tried to install my old version of WinDVD and failed and in the process perhaps accidentally deleted a file,
    now every time I try and use DVD BD drive I get the following message:

    "WIN DVD MFC application has stopped working"

    I tried to use restore point, but still get it, can anyone advise please?

    It will be interesting to know what model of laptop you have.
    Anyway, in my opinion, there is a software conflict. I guess players use even modules or plug-ins, and there is a conflict.

    I put t know what solution can be, but maybe you should remove both players, restart your laptop and make own BD drive in the hope that it will work properly.

  • Satellite L500 - DMIcheck application has stopped working

    Some of my drivers won't install givin message "DMIcheck application has stopped working" or similar for pInfo application...

    Same installation of 64 bit Windows 7 on another laptop didn't have problems like that.

    How to solve this?

    model laptop is L500 (short model No. PLJSHE)

    Hey,.

    To me that sounds like that the DMI information is missing, and if you get this error message...
    You use the Toshiba drivers directly?

    Usually the DMI information is missing, if the motherboard was exchanged and technicians forgot to re - write this information.
    In this case contact the guy again and they will do that for you! :)

  • Satellite L500D-144 - CCC of the host Application has stopped working

    Ladies and gentlemen,

    My PSLT6E - 007004GR is almost a year.
    This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
    Catalyst Control Center. The host Application has stopped working, it is looking for a solution.

    A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
    Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
    Is it reproducible.

    Have already reported more customers or I'm the first?

    What can you do to the problem?

    Sincerely,

    CBluebaerchen

    Hello

    > Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
    To do this the display of Windows Update driver update?

    If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.

    Otherwise, you can try running CCleaner. It can clean and fix registry problems.

  • Satellite L300-1AQ - Bluetooth tray application has stopped working

    When I put my laptop it comes up with an error that says:

    * bluetooth tray application has stopped working *.

    A problem has caused the problem to stop working correctly.
    Windows will close the program and notify you if a solution is available.

    Anyone who has a solution?

    The laptop is a Satellite L300 - 1AQ
    Didn't it monthly!

    Please help, thanks

    XX

    Hello

    Have you tried to reinstall the battery Toshiba BT?

    Usually, this will help you get rid of this error message.
    Here you can download the new BT stack:
    http://APS2.toshiba-tro.de/Bluetooth/

    First remove the old BT of the system software and after restarting again install the BT downloaded from the Toshiba BT page.

    Good bye

  • Want to m6: Catalyst Control Centre: host application has stopped working

    Whenever I start my computer, I get the following message every time that a few months:

    "Catalyst Control Centre: host application has stopped working".

    A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

    Please how can I get rid of this or get whatever the problem is solved?

    Thank you.

    Hello

    Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

    Recovery Manager - Windows 8.

    Recovery Manager - Windows 7

    After reinstalling, restart the laptop.

    Kind regards

    DP - K

  • Issue of satellite A300 Catalyst Control Centre - host application has stopped working

    At startup, and whenever I try to open the Catalyst Control Center, Windows displays the error message ' Catalyst Control Centre: host application has stopped working ".

    Has anyone else with similar problems.
    I tried to reinstall the drivers on the toshiba site, and install the new drivers on the ATI site and all I could think about. Given that the two pilots do not work im not able to exceed the resolution 1024 x 768.

    Any suggestions?

    Hello

    I googled for this error message and found many people having this problem.
    It s not related to the laptop, but for the driver
    Who knows why.

    In any case, in most cases the people solved this problem by the new driver Catalyst installation.
    You should do this;

    -upgrade your Vista to the last State
    -remove the old system catalyst
    remove/uninstall the graphics since the device manager driver
    -Restart the computer and reinstall the driver and catalyst

    Should work!

  • DRM activator application has stopped working

    play the games of big fish and a few weeks ago drmactivator application has stopped working shows up as a message and I can not play all games except those supplied with the computer - how can I fix this problem

    If you receive the DRM activator error message do the following to correct the problem.
    1 left-click on start
    2 - right click on computer
    3 - left click on properties 4 - left click on advanced system settings
    5 - running, click settings
    6. left click on the parameters of Performance data
    7 - click TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY.
    8. click on apply and then OK.

    UAC: (User Account Control)
    Open Control Panel and type in the user account in the search box. You will see the link for "turn User Account Control (UAC) or not". Until it clicks. Uncheck the box and restart your computer

  • Why my Catalyst Center: the host application has stopped working?

    When I log on my computer, a window opens in two separate occasions stating that Catalyst Center: the host application has stopped working... How can this be repaired?

    Hi Missy,

    This probably isn't a problem MSE or malware.  It could be a problem with the video software (which is otherwise commonly) and I have it on my system as well for my ATI graphics card.

    This just started recently - as the last day or more?  If so, try a system restore to before it started to see if that helps. If you use Windows 7, seehttp://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, seehttp://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, seehttp://support.microsoft.com/kb/306084. Sometimes this simple process made the rounds and sometimes that doesn't help - but it is easy and worth if she has recently begun.

    Good luck!

    Kosh

  • Catalyst Control Center host Application has stopped working

    I get this promt twice when I start the computer. I tried something that has been recommended who was clicking on tools in CCleaner and see if it was on the list that he was. I deleted it then as recommended but the guests still appear.

    Check these related discussions

  • Then installing game Big Fish, drmactivator application has stopped working, appears on the screen, this program has stopped working

    drmactivator application has stopped working

    Hi Gradatim,

    If you receive the DRM activator error message do the following to correct the problem.

    1. click on start

    2. right click on computer

    3. click on properties

    4. Select advanced system settings

    5. under performance click settings

    6. go in the Data Execution Prevention tab

    7. click on TURN DEP FOR ESSENTIAL WINDOWS PROGRAMS AND SETTINGS ONLY

    8. click on apply and then OK

    This will solve your problem of drmactivator.

    For more information follow the links below.

    http://Windows.Microsoft.com/en-us/Windows7/what-is-data-execution-prevention
    http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Keyhole DRM application has stopped working

    Keyhole DRM application has stopped working

    Hello
     
    This problem is related to a problem between Direct X and Shockwave.  It can be corrected either by:
     
    1 reinstall the latest Direct X
    2 UN-installing and re - install Shockwave, if you already have the latest Direct X
    3 both of the above
     
    To download and install the latest version of DirectX, follow these steps:

    1. visit the Microsoft Web site at the following address:
    http://msdn2.Microsoft.com/en-us/DirectX/aa937788.aspx (http://msdn2.microsoft.com/en-us/directx/aa937788.aspx)

    2. follow the steps on the Web site to download and install DirectX.

    You can also visit the following address Microsoft Windows Update Web site to see if DirectX updates are available:
    http://windowsupdate.Microsoft.com (http://windowsupdate.microsoft.com)
     
    You can also visit http://www.shockwave.com for more information on downloading and installing their software.

    Thank you, and in what concerns:
    I. Suuresh Kumar-Microsoft Support.
    Visit our Microsoft answers feedback Forumand let us know what you think.

  • On startup, I get the messages that applications have stopped working. One of them is (2nd message) IE3SH application has stopped working. How can I fix it?

    Start-up applications to receive messages from windows that have stopped working. One of them is IE3SH application has stopped working. How can I fix it?

    Hi 9gonz9,

    Welcome to the Microsoft Answers site!

    You get this error message when you start the desktop computer?

    You can check if the complete startup items are checked in the msconfig utility.

    1. open System Configuration by clicking Start , clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration.

    If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    2. click the Startup tab and check if all the items are archived there.

    You can also run a bag of security for your computer and check if this solves the problem.

    http://www.Microsoft.com/Security_Essentials/

    If the problem persists, turn the computer in clean boot and check if all the background program is causing this error message. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    The steps to perform a clean boot are given below:

    1 log on to the computer using an account with administrator rights

    2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue

    3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

    4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

    Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

    Once you start the office see if you get the error message. If not then follow the divide and conquer method mentioned in the article below to know which program is causing the problem.

    For more information about the clean boot, follow the below given link:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start, type msconfig.exe in the start search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. on the general tab, click the Normal startup option, and then click OK.

    3. When you are prompted to restart the computer, click on restart

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Catalyst Control Centre: host application has stopped working Windows xp prefessional

    Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.

    Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.

Maybe you are looking for