Users of VPN cannot connect using application using port 3404

Similar Questions

• By mistake I disabled all user accounts and cannot connect to my dell latitude d610 laptop computer. Tried going into the bios and turning off everything, what does not work!

  By mistake I disabled all my user accounts and cannot connect to my laptop, the Dell Latitude d610. I tried to restart in all modes as well as rotating directors passwords and disable in the bios. Nothing works!

  Hi kathleenvickers,

  1. How you have disabled all the user accounts on the computer?
  2. What do you find in the login screen when you restart the computer?

  See the articles below and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• Cannot connect using ThinkVantage Fingerprint software

  Hi, I can't connect using my fingerprint reader. I'm sure that the fingerprint reader is OK, I sucessfully registered fingerprints. I activated the connection of the fingerprint, when the computer starts, windows 7 message saying 'Slide your finger on the green' appears, but when I drag the finger, nothing happens. Fingerprint reader just a flashing green (when I try to finger Chipeur, who is not registered, flashes orange, so fingerprints are registered properly).

  I tried to uninstall the software of fingerprints and the pilot, but his does not work. I connect with the domain account.

  OS: Windows 7 x 64

  Lenovo T410 (NT7Q7MC)

  ThinkVantage Fingerprint Software version: 5.9.4

  Thank you very much for the help!

  Labus

  The domain account is probably the question given that the fingerprint software is installed for local connections. Someone correct me if I'm wrong about this.

• Phones AnyConnect VPN cannot connect to network ASA high-speed AT & T uverse

  Phones AnyConnect VPN are configured to connect to the ASA 5510 running 8.4 (4), and it uses the Active Directory credentials to connect. The connection is successful external ISP systems including Comcast and smaller independent service providers. However, when all of us at the AT & T uverse service take this phone 7965 even at home it networks fails to make any connection to the ASA at all. A capture of packets on the ASA shows no activity connection to the IP address of our uverse.

  What's more, is that we can successfully authenticate the VPN of the phone when using the local account credentials (e.g. username admin password * priv 15) that are entered on the SAA. AT & T said that they are not blocking the ports. It is the confusion that this works for users to access local connection, but not with A/D.

  So I guess the question is: what is the first handshake TCP/UDP composed when a Cisco IP phone links AnyConnect SSL to an ASA and negotiates the authentication of the number of A/D? For example, what are the port numbers used in this handshake?  I couldn't find all the diagrams illustrating the HRT and the RFC for DTLS do not seem to have the answer either.

  Thanks in advance.

  -Athonia

  Note: we have a TAC case open currently with subject ASA 5510 VPN Edition w / 250 annyconnect user - SSL VPN for phones. Configuration

  I too ran on this issue and here is a description of what I found.

  If you use automatic network detection first trys phone ping the TFTP server, he has learned from the DHCP server or manually set with the parameter of the alternate TFTP server.  If the TFTP server is accessible the VPN will not connect and will not allow the user to connect manually.

  ATT Uverse use DHCP option 150, the same option as Cisco UC uses to automatically set the TFTP servers, to locate the local home gateway so that the STB can join him.  For this reason, you should notice that when you have a VPN phone on the network and view network settings the IP address of the TFTP server is the IP address of your default gatewat (The ATT router).

  Because of the automatic detection of network works in ping the TFTP server that the phone will always think that it is connected to the local network.  The workaround is to manually set the TFTP server on the phone * to the IP address that the TFTP server would have been if she had leared it from the DHCP server on your corporate network.  The reason you should do this instead of just using a Bogon address, is that once the VPN is connected it tryes to register to the address that you specified.

  Please let me know if this solves your problem as it did in our case.

  * If you do not know how to set the TFTP replacement setting you must first select the "replacement" TFTP protocol and press on * #.  This will allow you to change the default no to Yes.  The below named parameter TFTP Server 1 will then allow you to manually specify the address.

• 4G the Z10T Portege - Win8 cannot connect using Sonicwall Global VPN

  Hello

  We have installed the latest version of the client to Sonicwall Global VPN on the Toshiba Portege z10t with a Telstra Sim card inside.

  When we connect to our office, in the step acquired IP, stopping the process there.
  If we use a Telstra 4 G Wireless router, it works perfectly.
  Apparently, there is something of the z10t that blocks the process.

  Someone had the same problem?
  We have upgraded the bios and drivers on the z10t, but without success.
  Kind regards

  It is not easy to say why this is happening. In my view it will be difficult to find someone here who can test for you or someone who has an identical machine and use the same VPN client.

  Missing important information: do you use original image recovery Toshiba or clean install of the OS?

• Cannot connect using any user

  Original title:

  want to connect again? NO!

  Hello world

  I have a problem on my computer and I wanted to share it with you all, because Microsoft in my country could not help so maybe one of you has the solution.
  A few days ago, when I turned on my computer and when I log on, Windows (I have Windows 7 Ultimate, SP3, 2009.) has accepted the password and there was the home screen and then a black screen with my courses that I could move and then suddenly, he returned me to the login screen. I tried with different users but it starts spinning me without even seeing the office... There was no warning that my password was wrong, and I also did some scans with all the antivirus I have in safe mode but nothing. I tried to be as detailed as possible, and if anyone has another question, he may request. I hope that someone of you all can help. I posted this safe mode with network because I can't access my account (user) while having the problem that I have explained.

  Thank you all,
  William :)

  1. you say you know the password which is log you in, but immediately connects you back out.

  2. There is no system restore point to return.

  3, but everything works in Mode safe mode with networking.

  4. If the Virus/Malware has done this, he would normally ask a password that you did not connect in Normal Mode and you would get rid of him by doing what you were doing. scanning in SM with N.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make your own information system repair disc in this tutorial:

  "How to create a Windows 7 system repair disc"

  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  "This will show you how to create a system repair disc Windows 7 to be able to use to start the system recovery options to help recover your Windows 7 installation, if you have not a Windows installation disk, can't find your Windows installation disc or can not access the recovery options provided by your computer manufacturer.

  A system repair disc is not able to install Windows 7.

  Note

  If you are unable to start your Windows 7 to create a Windows 7 system repair disc, and then you could create on another computer for use on your computer. »

  _____________________________________

  Then, use this disk for System Recovery Options:

  "System recovery options".

  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  "How to run a startup repair in Windows 7"

  http://www.SevenForums.com/tutorials/681-startup-repair.html

  _______________________________________________

  If this fails, back up your data in Mode safe mode and reinstall.

  See you soon.

• Jabber user cannot connect using the AD account

  Hello

  I have a question about jabber/movi registering on local control of the VCS. They can't log in using their Jabber account on the control of VCS that have been configured on TMSPE. The connection error message is ' user/password incorrect or field name '...

  Jabber users who were configured manually on the TMS can sign in successfully.

  Connection between TMS and AD is ok and import AD users successfully.

  What should be the correct configuration on the authentication policy control VCS?

  > Sub-area by default?

  > Deafault area?

  > The traversal area?

  I also need to plug the VCS control on the announcement?

  Thank you

  Acevirgil

  "Verify the identification information" on the three - and Yes, the VCS - C needs to be added to our era.

  /Jens

  Please note the answers and score the questions "Answered" as appropriate.

• Cannot connect on application using PS Designer

  Hello
  I'm in the middle of the installation of the MFC 9.0 on PT8.49.
  I upgraded my 8.49.15 peopletooles patch and run the install.
  After running the script generated by the PPLTLS84CUR project, I am not able to connect to APPDesigner, use more PS/PS, I can connect to Data Mover, using both PS/PS, but also the sysadm.
  SQLPlus also works with the id
  I was able to build the project and connect to AppDesigner using PS/PS util that I t dthe PPLTLS84CUR construction phase
  and run the script.
  The error I get when trying with PS/PS is "Invalid UserID and Password for signon"
  I use COnfig Manager to set my connectid and username before you start the Appdesigner installation related steps. It was working until I have build and run the above script
  Help, please.
  Thank you

  You must run the grant.sql script again.

  Nicolas.

• Satellite L750D - cannot connect using the administrator account

  Hello

  I have a Toshiba Satellite L750D-14R and it I cannot access to my administrator account, I had not changed my password or anything either, and, the night before, I had been on that fine and the next day he said my username or password was incorrect.

  I tried to put my password in full about 30 times and he wouldn't so I had to use the account invited to try and find a solution, whenever I connect I try to put my password and it still says the same thing.

  Can someone help me please?

  Someone at - it other access to your laptop? I mean the password cannot be changed without reason.

  Maybe a stupid question now but have you created the recovery disc? Problem is that without this password, you will not be able to install the OS by using recovery image saved on the HARD disk and in the worst case, you must reinstall OS by using the recovery disk.

• The son works do not - cannot connect using the connection wired remote

  I tried to connect my other computer to the Internet using an Ethernet RJ-45 cable to connect to the Modem, and then plug in then. The computer is detected on the modem and the computer has detected the modem too. When I enter the user name and password and connect, it remains to the WAN Miniport PPPOE connection and then it says that the remote computer has failed. I restarted the modem several times. The defective cable or the computer is defective. My other computer running Windows XP Professional SP2.

  "Is the cable defective or faulty computer."

  Well, try another cable and limit it.

• How to display the user name for database connection using dreamweaver? [was: help]

  connect display mode database using dreamweaver user name

  LionelLionel wrote:

  OK, sorry 4 that; I use dreamweavercs6 and the script server is php.i as accurate must I set up a server (wampserver) local on my laptop for this level of competence of project.my with scripts php is very limited. and now, after you have created the database (in phpmyadmin), I want to display the user name of the user after login... I need help please.thx

  You want to display it where? On the login page of "success"?

  Add the below to each top of the page:

  Then add the following in the code where you want the ' user name to appear:

• Toshiba 39L4353D cannot connect using Intel WIDI after upgrade to win 10

  installation of Intel Widi into my TV 39L4353D has worked with my old laptop windows 7, I've recently updated to a new 10 portable windows and intel Widi does more. I checked that I have the most up to date drivers and software for the laptop and the TV.

  The laptop detects and connects to the TV, but nothing appears on the TV screen.

  Hi Henoir.

  For Intel WiDi using the Windows 10 system problems, please see this document from Toshiba:

  How to activate Intel WiDi (Wireless Display) within Windows 10 with a receiver certified Intel?

  It will be useful.

• Cannot connect using fingerprints more on Satellite A300

  Hey everybody,

  I have been using Truesuite Fingerprint Login to connect to windows, and all of a sudden I can't use it...
  I tried removing fingerprints and redo them. Change restart settings, a lot of things.

  If anyone has any ideas that would be much appreciated.

  Thank you guys.

  -[Shaun]

  Hello Shaun

  I found the new version of the fingerprint software. You can get it under the http://support1.toshiba-tro.de/tedd-files2/0/fp-sw-20081009140410.zip
  You can try to remove the old and check with the new version. Sorry, but that's all I can say about it. Maybe new version does not have these problems.

• Cannot connect using NetGear WG311 v3 adapter

  I had to use a card WG311 v3 installed on a second computer Dell.  It recognizes all secured and unsecured in the neighborhood networks, but does not connect.  My main computer, also a Dell, is hooked up to a WRT54G using personal WPA for encryption.  My first reaction has been re - find the WRT54G unsecured and see if the WG311 would connect to my wireless network.  It would not be.  Can anyone help?

  I got the Linksys support online and they have corrected the problem.  Thanks for your concern.

• Cannot connect using Creative Cloud Desktop (Bug)

  Whenever I get my login and my password, the application of office says "you have been disconnected" and brings back me to the login screen. He always goes in a loop like this for. I am sure that my login and pass are correct.

  I want to connect to get auto-updates on applications and easy access to all Cloud applications. Thanks for any help, tried everything including uninstalling and reinstalling.

  Hi Modus21

  Please uninstall the desktop application and follow the steps below:

  Delete the file opm.db.

  1. Navigate to the OOBE folder.
     Windows: [system drive]: \Users\ [user name] \AppData\Local\Adobe\OOBE
     Mac OS: /Users/ [user name] / folder/Library/Application Support / Adobe / OOBE
  2. Delete the file opm.db.

  Redownload the app desktop cloud creative https://creative.adobe.com/products and the connection.

  Concerning

  Akshay