Uses of input/output Port

Similar Questions

• Using text input/output of Captivate Exhange

  I have used Captivate for the basics, but I'm looking to do more. I downloaded the Text Input/Output of Captivate Exchange files, but I can't find any instructions on how to apply. The idea is that you would be able to "capture an entry on a slide and post it on blades later.» The zipped download contains four files:
  
  textInput.fla
  textInput.swf
  textOutput.fla
  textOutput.swf
  
  My question is how to bring these to a piece of Captivate and use?

  Here is the link to download the files:

  http://www.Adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&loc=en_US&EXTID=1253 021

  I just realized that the instructions are also on this page...

• Audio input/output ports Thinkpad Mini Dock Plus Series 3 with inactive W520

  I have 3 laptops W520 and 3 Thinkpad Mini Dock Plus Series 3 docks. The audio 1/8 "output audio and MIC ports are not detected by Windows. In the sound settings, the high definition Audio Device is always disconnected. I read that there was a problem with background sound via ports audio on an earlier execution of these docks, but the production on these date are all 11/07 (after Lenovo solved the problem). Someone had a similar problem? The ports are inactive for the W520 by design?

  Solution:... drivers. Should have checked that first. I thought that our support office would have done that. I thought wrong.

• How to upgrade output during input/output synchronized?

  Hello

  We use an input/output series card m PCI-6289 to provide participants sound while recording the EEG.

  Our inputs and outputs are synchronized using the diagram that is attached.

  To date our output audio segments have been relatively short. However, now we want to output sounds which last a long time. I've run into shortages of memory by using the current diagram.

  Could someone suggest how I could update the audio output, regularly with pieces short 1 sec, in the loop in the diagram attached?

  I tried to move the DAQmx Write.vi (point 4 on the diagram) inside the loop, but the output signal was not correct.

  Thank you very much for your advice!

  Frenk

  Hi Frenk,

  Can you be more specific about the error that you are experiencing?

  Have you heard of the regeneration of analog output? It can be used with a property DAQmx writing node.

  Regeneration is the repetition of the data already in the buffer. Standard regeneration is when the PC buffer data are continually downloaded on the FIFO to write. If the data buffer is smaller than the size of the FIFO, it is copied as many times as possible in the FIFO before the start of the generation. This is done to reduce the risk of errors of bandwidth by transferring is not the new data down to the FIFO fairly quickly. Once started, the generation of the copies of the data are no longer manufactured to fill the buffer. New data can be written in the buffer of PC at any time without interrupting the output.

  You can also use the FIFO regeneration. With regeneration of the FIFO, the entire buffer is downloaded on the FIFO and regenerated from there. Once the data is uploaded, new data cannot be written to the FIFO. To use the FIFO regeneration, the whole buffer must fit within the size of the FIFO. The advantage of using the FIFO regeneration is that it requires no communication with memory primary host after the operation started, thus avoiding any problems that arise due to the excessive movement of buses.

  Take a look at this link which travels with the regeneration: http://www.ni.com/product-documentation/3874/en/

• myRIO - measure unique output completed using differential input

  Hi all

  I had used myRIO 1900 to measure the power of the microphone, which varies from 0 to 5V (biased to 2, 5V).

  I used one of the analog input ports completed only connector MXP or B to read the value.

  A few reasons, I changed the microphone with amplifier and when measured using oscilloscope and other hardware DAQ, supply range of + 5V and - 5V.

  As the MXP is unable to read the voltage-ve, I realized that I need to change the connection to the MSP connector C.

  It is mentioned in the dataheet of myRIO we can measure up to differential Channels analog input +/-10 V.

  Although there are some reference materials available, I do not understand completely how to read the single ended output using differential input.

  Should I use no matter what op-amp or comes directly from their phone?

  Can someone kindly explain to me the differences and some references on how to connect!

  Although I tried to read through this white paper, I felt completely lost

  http://www.NI.com/white-paper/3344/en/

  Exit ended unique direct and/or the amplifier has 2 pins: GND and Vout

  Entered different a 3-pin: A +, A - and ALWAYS

  I had attached the screenshot of the form OP amp for your reference

  

  I think that you just connect your Vout to the + ve differential termination, MASS to Terminal - ve. (Briefly) An asymmetric measure is between the channel of GOT it and STILL while a differential measurement is between the + ve and ve - terminal. One measurement unit completed is referenced to GND is where you are measuring the tension of.

• Focusrite scarlett 2i4 unable to use as audio input/output device

  I just bought a Scarlett 2i4 hoping that time would have been solved compatibility problems. However, I'm unable to use it as an input/output device. Site Web Focus rite has a class compatible mode download that is supposed to solve this problem. And I installed it three times without success. Has anyone else had this problem and found a workaround. Thank you! I have a macbook pro mid 2012, el capitan 10.11.3.

  Don't know if this will help.

  I have a 2i2. When I got it, a few BONES in there, I couldn't make it work. I went back and forth with tech support Scarlett. They really tried, even sent several beta drivers. Nothing works.

  Then I uninstalled all the software of Scarlett and restarted - and it works.

• Can I use first for HD (3D) for video edtiting on the Surface pro 3 (i7 8 GB)? (in m2ts input/output)

  Can I use Premiere Elements for (3D) HD video editing on the SURFACE PRO 3 (i7 8 GB) in m2ts (input/output)?

  Elements does not support 3D, and I doubt that it is running correctly on a Surface.

• Portege 3490CT - inputs/outputs

  I have a problem caused by drivers being removed from the machine according to me. I can't input/output using the external remote diskette, CD Rom, or USB port.

  How can I install new drivers without internet access?

  Hi Thom,

  If you have isolated your notebook all your i/o devices, your only way to restore access will restore your full operating system of your recovery disks.

  However, before I do something drastic, that you can try to start in safe mode to see if this will allow you to access your external devices, or you can try to restore your system to a previous restore point (assuming you are using XP) before your drivers has been removed.

  HTH

• Use of the parallel port

  Hello

  I have a lot of experience with earlier versions of Dasylab (up to V9) and recall his ability to use the parallel port of PC as a "quick & easy" way to get digital input/output lines of the PC. If my memory serves me well, done by activating the sound card driver?

  However, I recently bought the latest version (V13) and it seems the digital input / output modules are now grayed out when the sound card driver is selected, i.e., it only allows to input/output analog (audio).

  Is it still possible to drive this port with the latest digital lines... .or have I missed something?

  Thank you best regards &,.

  This feature has been removed a few versions ago. With the changes in Windows after XP, it became problematic.

  If you are still using XP with DASYLab 13 and will always have a parallel port, you can retrieve the V9 sound card driver and try it.

  If you need me to download it or email it to you (it is usually an illegal attachment), let me know by private message with your email address.

• audio output: optical digital output port (no sound!) macbook pro retina 15 mid 2015

  My new recently Mbpr 15 inch has suddenly lost its sound, I went through the process of the toothpick etc but nothing. It worked perfectly fine earlier today, but I put in a mini jack into the headphone port and after to achieve 30 minutes later and taking the cable to THE that I had not his, then I had the red light coming out of the helmet but now its does not come in red and in the sound settings in system preferences its impasse on "optical digital output Port.

  I now have to wait a week to wait until I can get seen at my apple store closet, I coming projects upward and in the middle of deadline and really using this Mbp to work, I literally only had a TI surly less than two months, I shouldn't have any problems. So if anyone knows anything I would appreciate it a lot! I need help to get this resolution as soon as possible! the last post I saw this was in 2006-2012 no new thread on this recently!

  Thank you!

  Jasonwaterz wrote:

  I then had the red light coming out of the helmet but now its does not come in red and in the sound settings in system preferences its impasse on "optical digital output Port.

  Try resetting the NVRAM/PRAM http://support.apple.com/kb/ht1379 memory

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• OR 9403: Digital Input/Output slows timed loop?

  Hi all

  I use a loop timed sample of 7 current channels (NI 9023), 3-channel (NI 9025) voltage at 1000 Hz in scan mode and it works fine. However, when I add for 8 output channels of the input/output module digital module NI 9403 for timed loop, CAPAS sampling cannot exceed 1000 Hz. According with time stamp data I wroten in file, it seems that I have in all ten milliseconds, I missed a miliseconds.

  I would like to ask is there a reason for this? The digital I/o module affect the timed loop?

  Thank you much in advance.

  I'm not familiar with the FPGA code, so I can't comment there.  However, I noticed that you call writing to text file twice in the timed loop.  Can you only collect data and then write the files after the time loop?  This would save a lot of time.  For each entry, the program needs to access the hard disk, find the end of the file, add him and return to write on the hard drive.  A lot of your time, especially since the files are getting bigger.

• Mathematical functions with input/output error

  Please refer to the attached picture. Where do you find these mathematical functions with input/output error? I saw these in response to a message.

  I think they appear when you connect a waveform or dynamic data type.  Since I rarely use these data types (just give the table!), I'm not positive.

  Lynn

• How to start the view off of the ref cursor Oracle as input/output param

  Hello world

  We use JDev 11.1.2.3 WL 10.3.6 and Java 7.

  We are at the beginning of our transition from Oracle Forms to ADF.  We have a very large forms that uses many store procedures that have IN/OUT ref Cursor parameters and tables plsql.  I tried to find information on best practices to achieve, but only seemed to find tutorials on SEO of the Oracle ref Cursor return functions.  I hope we don't have to rewrite our code of database to work with ADF.

  This is an example of a proc currently a block on a form based on directly

  The ref cursor parameter is input/output to satisfy the way the form handles this type of paradigm.

  ADF we want I hope to reuse these procs existing (without the need to wrap/overload them) on the basis of the display objects.

  Example:

  / * my record type which houses the information I want to go back * /.

  TYPE rec_hist_vacpac_status IS RECORD)

  rec_order NUMBER (5),

  rec_rownum NUMBER (5),

  return_column SAM_VACPAC.vacpac_status%TYPE,

  rec_login_id SAM_VACPAC.ins_user%TYPE,

  status_date SAM_VACPAC.status_date%TYPE

  );

  / * Sets the ref cursor type * /.

  TYPE lcur_hist_vacpac_status IS REF CURSOR;

  / * This is a procedure that would take some info link go / return

  Return the ref cursor of this information as an in / out * /.

  PROCEDURE prc_myinfo_refcur)

  pnum_identify_seq_id in NUMBERS

  pcur_myinfo IN OUT lcur_hist_vacpac_status);

  Can anyone point me in the right direction on documentation on this?

  Thank you!

  Hi Cemerson:

  See this example:

  1. 1. create a TYPE as an object

  CREATE OR REPLACE

  TYPE GOTYOB_EQUI

  AS AN OBJECT

  (

  CDELEM VARCHAR2 (50).

  TIELEM VARCHAR2 (2)

  );

  1. 2. create a TABLE TYPE AS

  CREATE OR REPLACE

  TYPE GOTYTA_EQUI

  AS THE GOTYOB_EQUI TABLE;

  1. 3 create a function, it returns the TYPE of the TABLE

  FUNCTION fn_equiposarriba)

  pa_cdelem IN VARCHAR2,

  pa_nucomp in NUMBERS

  pa_anperi in NUMBERS

  pa_meperi in NUMBERS

  )

  Gotyta_equi RETURN PIPELINED IS

  CURSOR trae_equimani (va_cdelem VARCHAR2) IS

  SELECT cdelem, tielem, cdelempadr,

  (SELECT cdequi

  Of evm_alim

  WHERE anperi = eq.anperi

  AND meperi = eq.meperi

  AND nucomp = eq.nucomp

  AND cdalim = eq.cdalim) cdalim

  Of evm_equimani eq

  WHERE anperi = pa_anperi

  AND meperi = pa_meperi

  AND nucomp = pa_nucomp

  AND cdelem = va_cdelem

  AND cdelempadr <> cdelem

  AND tielem <> 'A ';

  equimani trae_equimani % ROWTYPE;

  va_cdalim VARCHAR2 (100);

  BEGIN

  -Loading los equipos aguas arriba

  WHILE equimani.cdelempadr IS NOT NULL LOOP

  OPEN trae_equimani (equimani.cdelempadr);

  equimani: = NULL;

  SEEK trae_equimani INTO equimani;

  CLOSE Trae_equimani;

  IF equimani.cdelem IS NOT NULL THEN

  PIPE ROW (gotyob_equi (equimani.cdelem, equimani.tielem));

  END IF;

  END LOOP;

  RETURN;

  END;

  1. 4 SQL Query with the help of the function... you can use this SQL in a display object

  SELECT

  *

  Of

  TABLE (gopq_eventos.fn_equiposarriba (' F-SCZ-043-103', '))

  1,

  2013,

  6

  )

  )

  Best regards, Marcelo

• Error input/output of the VMFS5 local data store

  Hello

  I have 3 locally on the hard drive on my server from IBM. 1 250 GB drive, I used to create the data store Linux (datastore1) and other 2 disks that I created the Windows data store (datastore2)

  Couple of VMS is deployed on the two databases. Over the weekend, suddenly vms Windows Data Store (datastore2) went down. When I checked Monday concluded that data store is visible to ESXi host but I am unable to navigate to virtual machines.

  If I Directory VM cd I get below error:

  ~ # cd/vmfs/volumes/Windows\ Data\ store/Win - 2 k 8-2.

  SH: getcwd: input/output error

  # (unknown)

  ~ # esxcfg - scsidevs - l

  MPX.vmhba32:C0:t0:l0

  Device type: Direct access

  Size: MB 1911

  Full name: USB Direct-access Local (mpx.vmhba32:C0:T0:L0)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/mpx.vmhba32:C0:T0:L0

  Devfs Path: /vmfs/devices/disks/mpx.vmhba32:C0:T0:L0

  Seller: SMART model: USB - IBM Revis: 0000

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: true

  Is Local: true is SSD: false

  Other names:

  VML.0000000000766d68626133323a303a30

  VAAI status: unsupported

  MPX.vmhba33:C0:t0:l0

  Device type: CD-ROM

  Size: 0 MB

  Full name: Local USB CD-ROM (mpx.vmhba33:C0:T0:L0)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/cdrom/mpx.vmhba33:C0:T0:L0

  Devfs Path: /vmfs/devices/cdrom/mpx.vmhba33:C0:T0:L0

  Seller: KVM model: vmDisk-CD live again: 0.01

  : SCSI 2 is Pseudo: false status: on

  : RDM Capable false is removable: true

  Is Local: true is SSD: false

  Other names:

  VML.0005000000766d68626133333a303a30

  VAAI status: unsupported

  NAA.5000c500478aee93

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478aee93)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478aee93

  Devfs Path: /vmfs/devices/disks/naa.5000c500478aee93

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478aee93535439333030

  VAAI status: unknown

  NAA.5000c500478b8d3b

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478b8d3b)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478b8d3b

  Devfs Path: /vmfs/devices/disks/naa.5000c500478b8d3b

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478b8d3b535439333030

  VAAI status: unknown

  NAA.5000c500478d724f

  Device type: Direct access

  Size: 286102 MB

  Full name: IBM-ESXS Serial Attached SCSI disk (naa.5000c500478d724f)

  Multichannel plugin: NMP

  Device console: /vmfs/devices/disks/naa.5000c500478d724f

  Devfs Path: /vmfs/devices/disks/naa.5000c500478d724f

  Seller: IBM-ESXS model: ST9300605SS Revis: B556

  SCSI level: 6 is Pseudo: false status: gradient

  RDM Capable is: true is removable: false

  Is Local: the SSD of is wrong: false

  Other names:

  VML.02000000005000c500478d724f535439333030

  VAAI status: unknown

  ~ # esxcfg - scsidevs - m

  NAA.5000c500478d724f:1 /vmfs/devices/disks/naa.5000c500478d724f:1 4f83af28-52abeaf2-6475-5cf3fcba46f2 0 Linux Data Store

  NAA.5000c500478b8d3b:3 /vmfs/devices/disks/naa.5000c500478b8d3b:3 4f7cfc39-4d17993a-a08c-5cf3fcba46f2 0 Windows Data Store

  Data store of Windows NAA.5000c500478aee93:1 /vmfs/devices/disks/naa.5000c500478aee93:1 4f7cfc39-4d17993a-a08c-5cf3fcba46f2 1

  Here is the output of dmesg: I suspect to be a hard drive problem

  (2014 06-16 T 10: 46:25.385Z cpu5:382346) WARNING: UserObj: 675: could not crossdup fd 8, / dev/ptyp0 CHAR type: busy

  (2014 06-16 T 10: 46:25.385Z cpu5:382346) WARNING: UserObj: 675: could not crossdup fd 10, / dev/ptyp0 CHAR type: busy

  (2014 06-16 T 10: 46:25.385Z cpu2:382348) WARNING: UserLinux: 1340: unsupported: (void)

  (2014 06-16 T 10: 46:52.510Z cpu16:4112) NMP: nmp_ThrottleLogForDevice:2318: Cmd 0 x 28 (0x412440db9c40) to dev 'naa.5000c500478b8d3b' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0x4 0x32 0x0. Bill: NO

  (2014 06-16 T 10: 46:52.510Z cpu16:4112) ScsiDeviceIO: 2316: Cmd (0x412440db9c40) 0 x 28, CmdSN 0x2a to dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  (2014 06-16 T 10: 47:34.631Z cpu18:4114) NMP: nmp_ThrottleLogForDevice:2318: Cmd 0 x 28 (0 x 412441635000) to dev 'naa.5000c500478b8d3b' on the way 'vmhba2:C0:T0:L0' failed: H:0 x D:0 x 2 P:0 valid 0 x 0 sense-data: 0x4 0x32 0x0. Bill: NO

  (2014 06-16 T 10: 47:34.631Z cpu18:4114) ScsiDeviceIO: 2316: Cmd (0 x 412441635000) 0 x 28, CmdSN 0x1c to dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  (2014 06-16 T 10: 47:41.476Z cpu18:4114) ScsiDeviceIO: 2316: Cmd (0x412440da3500) 0 x 28, CmdSN 0 x 21-dev 'naa.5000c500478b8d3b' has no sense H:0 x D:0 x 2 P:0 valid 0 x 0-data: 0 x 4 0 32 x 0 x 0.

  Please guide me to solve this problem. Thank you all in advance

  /virtu4

  This problem is solved.

  Thanks to the communities for not responding, that made me to fix this myself

  /virt4