Using a badge TV as monitor in Windows 7
So, I got my computer in XP using my Insignia TV as a monitor using a VGA cable. I have a machine of windows 7 I would like to replace the XP machine with. The windows 7 machine works very well on my screen 19 '' little but when I try to use the TV as a monitor I get no a message of the TV signal as soon as I should get to the login screen. I updated my video card drivers (the last update has been less than a month) and changed my resolution 1024 x 768 and still no luck. If I start in safe mode and disable my graphics card it will work, but then I can't play games or enjoy my video card. Any suggestions?
I'm done with an HDMI instead of VGA cable and it worked. If you do not have an HDMI output on your graphics card seems as if you were out of luck.
Can I use the MBP as a monitor to a windows PC?
N ° the MBP has no built-in support for this.
I try to use 2 monitors with windows 7 for my wife can work at home connected to the workstation via the vpn. We are able to use two screens while workinig offline (for example. Able to drag and use programs from one screen to another). However when it is connected to his work station we are not able to drag and use both programs on different screens.On Fri, 24 Sep 2010 12:53:35 + 0000, Safert39 wrote:> I try to use 2 monitors with windows 7 for my wife can work at home connected to the workstation via the vpn. We are able to use two screens while workinig offline (for example. Able to drag and use programs from one screen to another). However when it is connected to his work station we are not able to drag and use both programs on different screens.Right. If I understand what you're saying, you cannot do it.--Ken Blake
Ken Blake (MS-MVP)
I have upgraded to Windows 10 and my second monitor will not work. On Windows 7, I was running my second monitor with a USB 3.0 port. Apparently, 10 Windows does not support this configuration. How can I feed my second monitor in Windows 10 using either a USB 3.0 or MIC port?
Thanks in advance.
I'm running an additional monitor in Win10 to a USB connection, but it uses a USB adapter / VGA, and to make it work, I had to install the drivers that came with the card. Before that I did, Win10 has not even seen the monitor.
I got a PC by a family member and wish to multi monitor. Indicates the PC have windows XP. When I access the control/display panel etc. There is no available in multi monitor option. I've never experienced this before. Can someone give me advice please on what do I do?
What is the brand and model of the computer?
I would like you to follow the steps in this article.
How to configure and use multiple monitors in Windows XP: http://support.microsoft.com/kb/307873
I hope this helps.
* Original title: accidentally disabled monitors
My husbands office has windows 7 and I accidentally disabled monitors... it has two... do not know how I did, what I'm doing now, I tried to restart it by turning it and turning it on but I can't find a solution in safe mode... what I do now. Shouldn't have touched, but I did. Don't tell me to restore it... He didn't not to create a... Need advice ASAP
Thanks for posting your question on the forum of the Microsoft community.
It is possible that the dual monitor settings have changed.
I would suggest trying the following methods and check if it helps.
Please use the suggestions in these Microsoft help articles and check the issue.
Work and play better with multiple monitors
Guided Help: Setup dual monitor is easy in Windows 7!
Use the suggestions in these articles and check.
Change settings display on multiple monitors
(Also applies to Windows 7)
Multiple monitors: frequently asked questions
(Also applies to Windows 7)
Solving the multiple monitor problems
(Also applies to Windows 7)
I hope this helps.
I use Excel like this for years and never had a problem. Received a new computer with Windows 7 and Office 2010. Now, when I minimize Excel and stretch it across my two monitors, the window of excel is more horiztonally even on both monitors. In the secondary monitor, the bottom edge is higher than the lower edge of the primary monitor of 2.5 inch.Help, please.
For several years I have seen the problem that shows your image.
You can see in the picture the monitor of the number 2 is offset, vertically with respect to the number of monitor 1.
You can move the monitor autour images using the mouse in the same way as you would move a shortcut on the desktop.
Place the mouse cursor on Monitor 2, hold down the left mouse button and drag the image upwards slightly until it is aligned with the number of the monitor 1.
Test and let us know the results.
I know how to split the screen on a monitor. Now the problem is that I have two moniotrs, when I drag a window on the edge on the left, it automaticlly take half left of screen, however, when I drag another window at the right end, the window through the right end and jump to another monitor. So as to have a program takes half left screen monitor 1, a program takes half right screen monitor 1 and one program takes full screen on Monitor 2? I'm runnning on windows 8 pro.
I know not 'technical' solution to this problem, but I use multiple monitors with windows for years and your best bet for now is this little trick. Find an edge where the window will be 'snap' and autosize, then positioned manually on the "inside" edges of your dual display.
This explains how do with the windows shortcut keys instead of with the mouse
I have a Lenovo H430-2558-1ZU desktop computer running Windows 8 Pro with Media Center. I used it all of a sudden the video was cut, then I had no signal on the screen. I restarted and after Windows 8 logo, I get no Signal on the monitor. Windows 8 is running because I can hear sounds from the speakers. After using this method, I started in safe mode. I uninstalled the graphics card driver Intel HD of safe mode and restarted in normal mode. It was fine for a few minutes, but then I had no signal on the screen. So I started in new safe mode and uninstalled the driver. I installed a new Web site driver for intel, but I still have the same problem. I tried uninstalling the driver for the monitor, but still have the same question. The monitor is connected to the computer via a XtremeMac HDMI to DVIHDMI port. The monitor is aViewsonic VX1945wm I used for many years. I don't think that it is a hardware problem, because my Ubuntu install works fine. I am at a loss here, IDK what to do. Help, please!
I solved the problem. I plugged the monitor into the computer via VGA and it works beautifully. So I disconnected the VGA cable and reconnected the cable hdmi to dvi, and it is worked over HDMI since. Even after rebooting. It's a weird solution, but I'm glad it worked.
Using Win 7 OS 29.0.1 - window popup says v30 available, but "On Firefox" said 29.0.1 with no option to upgrade. Not sure if popup is wrong or why "On Firefox" does not give me the option.
Put your firefox here:
Edit: link fixed.
Is it possible to use the current version of Safari on Windows 10?
N ° Safari has been developed and supported for Windows in 2012. If you don't want to use Edge or IE, I recommend Firefox.
You can use 2008 iMac as a monitor for mini Mac?
No, because the iMac of 2008 not display entered or supported to do so.
You can use a connection network and something like ScreenRecycler
However, the best bet is to use a regular external monitor with the Mac Mini.
I use 1023TX dm4, and I install the windows 8, there is an ATI driver problem, I have two screen, one intel, and one is ATI. but ati driver does not, I need to turn off, can you help me?
More than likely HP won't to material support for W8 on any system purchased before October 1, 2011. Most of the W7 drivers will work W8.
Have a look here http://goo.gl/hmPRB for a document official on the update of drivers and software
This document here http://goo.gl/CO6uV provides information on the upgrade to Windows 8
I hope this helps.
Guys, I'm having trouble managing my mail server using Alt - N Mdeamon Mailing software with windows server 2012 R2...
Can anyone suggest Me an alternative to that.
Waiting for the answer
Problems to go to the post office software company.
Google for other e-mail programs.
I added third monitor display windows on it but the mouse is not going on the third screen
1. what operating system is installed on the computer?
2. What is the brand and model of the computer?
3. does the problem occur when you are working on a particular application?
We will define the third monitor as primary monitor and check the functionality of the mouse.
Please return to the State of the question.
Maybe you are looking for
Months ago, I created a subfolder to manage my business email. My emails to the company and personal emails come from the same place, but differs from the address of my emails from the company. It seemed like a good idea at the time, but I find that
Update of Firefox and none of my plugins worked up to that I went and changed ask to activate to always turn on. This plug-in NPAPI of Adobe Acrobat says it must be updated, but when I try it does not update. She finds the same need to screen update.
Hello I'm trying to get WIFI on my Satellite X 200 XP. I downloaded the drivers of these 'wlan-intel-1244-7147"but still no luck, also after installing these drivers, I get an error when I stopped saying" sample program does not. This is a new instal
Hello I'm trying to find out if it is possible to target a PC remotely to deploy and debug VBAI inspections. A customer has the VBAI on a PC to develop on and the run-time VBAI for PC license for use in the factory. I did research on the knowledge ba
When loading SP2 for Vista, I get an error code 0 x 80070005. I can't load Windows Live Messenger upgrade until I have service pack 2 support. What can I do?