Using a FP-I-V5 in differential mode

Hello

I'm creating an application by using the Modules of Point field. I use some memory twin for i/o modules. Does anyone know how we should connect module FP-I-V5 channel as differential. Examples of the operating instructions do not cover the case of differential.

Any help would be appreciated.

Hello

Dual Channel FieldPoint modules are isolated from each other. For analog modules, such as the FP HAVE V5, the two channels on the module share the same commune, while they are considered to be asymmetric. However, if you only use one channel, you don't share in common with the other channels and are therefore the differential measure.

To use the FP-I-V5 as a differential module, simply use a single channel.

Kind regards

Green shores
Support Engineer produces FieldPoint
National Instruments

Tags: NI Hardware

Similar Questions

  • Pinout of the device from the PCI-6225 in differential Mode of I

    Simple question: where is the pinout of the device for the card PCI-6225 for differential of analog input mode? I looked in the device list of the pins in MAX, in the NI 622 x specifications document and several other places, but I was not able to find it. I found the pinout for referenced asymmetrical measures, but no differential.

    Related issue: most people use devices like the 6225 for no entries analog differential? So why in tarnation do many brand of material OR that upper and lower manuals, looking for the differential input version?

    Thank you!

    «Referring the number of pins would make it impossible to use the same code when you change maps DAQ.»

    I'm not sure I followed here. Can you please explain a little further? Are you referring to the 1-68 0 connector pins and 1-68 pin connector 1? If so, I'm not sure, I followed. A different pinout may not change the code. If I had to replace a 6225 with another equivalent at least DAQmx device as many channels and the device number was the same, then I'd not change all the names of channel in the code, I? It would certainly change the wiring, which is precisely what I'm doing right now.

    I know that the analog input channels look like ai0, ai1, etc.. My concern is later: where the jumps occur when you're in differential mode?

    I have attached exactly what I would like to see in the documentation of ALL analog input device which allows the differential mode, only with the + and - channel names only and not the labels AI0-AI79. I couldn't find this photo any place, but rather had to laboriously calculate this pinout. If you know where to find this photo, I would be very grateful.

    Thanks for the reply.

  • Unusual in differential Mode: Urgent

    Forum from hell,

    I have a situation where I can't use the connections of CSR considerations of noise. So using my USB-6212 I enclose 8 of my sensors in differential mode with return line common to all HAVE them (-) 8 inputs and a reference sensor. I use the resistance of polarization of 100 kohm on all lines HAVE (+) and I (-) all lines. Is this correct? I mean since the lines HAVE (-) are common to all, should I connect only 100 kOhm?

    I think since I connected 8 resistances of polarization on a common line shared by all HAVE them (-), which effectively reduces polarization resistance at great value lesse (parallel connection).

    Please advice

    see you soon,

    Navneet,

    If the lines of AI are all connected to the same node on your measurement, so yes you can use only a single polarization resistance.

    Kind regards

    Danny F

  • Read a bit off in differential mode in NI 9205

    I have an LVDT connected in differential mode in NI 9205 tends in NOR cDAQ 9172. The output signal full scale is from-10 to + 10 VDC VDC. The excitation voltage is +-15VDC. I placed the LVDT to read mVDC - 1400 on the digital multimeter (DMM), well, it oscillates between 1399 mVDC and mVDC-1400. When I read that in Labview 8.5, reading is about-1.410 VDC, oscillates between - 1.407 VDC and - 1.414 VDC.  I know an offset of 10 mVDC isn't that much when my output full scale is 09:50 VDC and I'm not losing my sleep on. But I just wanted to know if it was normal.

    The output LVDT signal is referenced (-terminal of excitement and - terminal of the output signal are linked, it is necessary) and I plugged this thread of land on the port COM of NI 9205.

    I also have a sensor with floating floor whose output is 0-100 mVDC. I have it connected in differential mode too the + and - output terminals are connected to the ground/COM port using 100 k ohm bias registers. In this case, it is without lag at all. The DMM and Labview show the same reading. By the way I am at the same time by displaying the readings in Labview and DMM.

    Hi sharmaa -.

    You can find your shift error using pages 23 and 24 of the NI 9205 manual Instructions and specifications.  10 mV seems a bit high for this particular card, but as you say, 0.1% isn't so bad.  I would say that you have the right not to lose sleep on.

    Have a great weekend!

  • Problem: The differential mode, measure 1.4 V, USB-6009

    Hello world

    I am able to charge and discharge the two capacitors, individually.

    I use the USB-6009;

    Two capacitors, two charts, two analog inputs (AI0 +, AI01-) and (Al1 +, Ai1-);

    I have configuredin differential mode; Ok

    Problem:

    When a capacitor is switched off, it measures 1.4 V

    Try to correctly set the task - run the DAQ Assistant to create the task

    Dev1/ao0 would be much better - Oh, and now that you take the wizard open-Do on the wiring diagram, it offers you

    For the PREMIUM of 6009 task mode AI0 is + AI3 is - and you only reserve reserve explicitly AI0 (AI3 line is reserved by seleting the + line in the channel and the declairing it is differentiated)

    And give the task/channel a significant name of "MyCap1Discharge" would be useful...

    Now let's talk about your electrical engineering:

    The input of the 6009 impedance is 144kOhms the resistance of discharge 1MOhm becomes useless as soon as you connect the control AI 6009.

  • "Most Visited" is missing on personal bar and I can do this by using the suggested corrections, even in safe mode. What should I do?

    "Most Visited" is missing on personal bar and I can do this by using the suggested corrections, even in safe mode. What should I do?

    You didn't say what you tried. This link shows how to restore - https://support.mozilla.com/kb/Restore+the+default+Smart+Bookmarks+Folders

  • In differential Mode input impedance

    Hi all

    When I bought the USB-6212 card, I was impressed by the high input impedance of it - 10 GOhm.

    This is indicated in the specifications, as in between HAVE + and AIGND.

    So, what is the input under differential connection impedance?

    Hi Navneet,

    The question you have posted is actually a matter of multifunction data acquisition. You should post these questions in the Forums Multifunction DAQ. You will get much more quick answers to questions that are displayed in the correct forums.

    The input impedance, in differential mode is a little less, then twice the impedance of the AI referenced to ground. What this means, is that he will be GOhms ~ 20 to 19. The actual value is not available, because it's such a high input impedance.

    Best regards

    Jonathan

  • can you use a deskjet 970cse in black only mode when the color cartridge dries up

    can you use a deskjet 970cse in black only mode when the color cartridge dries up? Thank you, Jerry

    banhien information is very accurate. I would just add a bit of it. Because this printer uses a tricolor cartridge and a black, it should be one of the printers that will print with just the black cartridge installed. It is called print in backup mode. I should happen automatically when you remove the color cartridge and try printing. A message will arrive on the printer or the computer and ask you if you want to print in backup mode. Say yes, and it should let you print. Hope that helps.

  • Impossible to use the system in sleep or Hibernate mode after installing a new video card

    Have a card GeForce 6200 graphics with latest drivers installed and now I can't use the features of standby or Hibernate mode in Windows Xp System.

    This seems straight - Stand By and Hibernate will usually be available if the video drivers are not updated.

    For your NVIDIA GeForce card, I would do this:

    The best way to reinstall the NVIDIA software is to visit the NVIDIA support web page and let your system and to recommend the best software for your system... or you can find the correct version of the software on their web page and download the latest package of video driver for your system software and install it yourself.

    It is recommended to run the scan NVIDIA with Internet Explorer.

    Here is the link to the support page NVIDIA for the scan:
    http://www.nvidia.com/download/Prescan.aspx?lang=en-us

    Read the instructions, and then click the GRAPHICS DRIVERS button to start the scan.

    Let online to take a look at your video system scanner them and see what he suggests for drivers and consider their analysis if they offer a new pilot.

    When you have done, you can add a fourth "Hibernate" button to your menu to shut down the computer to prevent you from pressing the Shift key to Hibernate (which is good for lazy people like me).

  • Cannot use scroll effects in Muse so fluid mode, each page can cause different fluids on the fixed sections?

    Cannot use scroll effects in Muse so fluid mode, each page can cause different fluids on the fixed sections?

    Example: I have 4 pages and alone is fluid and the other are fixed?

    Yes, you can have effects from scrolling on a site which is partially adapted to the needs, as each page is independent of the others. Muse only disables the effects when you add a breakpoint to a page.

    David

    https://creativemuse.co

  • When using grid of fluid layout, where the mode of creation in the version of Dreamweaver 2014?

    When using grid of fluid layout, where the mode of creation in the version of Dreamweaver 2014?

    Open your fluid Grid CSS file and add an X as shown below.  This trick DW into thinking that it is a normal page layout, so you can use the Design mode, spell checking, copy & paste text, etc...

    /*

    Properties Grid Dreamweaver fluid

    ----------------------------------

    DW-num-CLO-mobile: X 4;

    DW-num-CLO-Tablet: 8;

    DW-num-OCOL-Office: 12;

    DW-gutter-percentage: 25;

    =====================================

    Nancy O.

  • The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when selecting th

    The error message "no more virtual tiles can be allocated" appears when I try to use the effects in the quick edit mode in my 13 elements. The OK wand has to press several times for loading all effects models. The error returns when you select the particular model.

    The problem does not appear, if PH 13 items is run in administrator mode.

    The available computer resources are rather big enough: INTEL CPU i7 4 cores, 16 GB RAM, 1 TB HDD + 32 GB SSD, Windows 8.1.

    Please, advice how to fix this problem? Perhaps, there is patch or update available?

    I had this problem with some of the choices menu in PSE13 when my drive to work was only a SSD with 53 GB of free space. I assigned a second disc of work (my data disc with ~ 2 TB of free space) and the error disappeared.

    Scratch disk settings can be found under preferences / Performance.

  • can I use Siri while Apple Watch is in mode of bedside table?

    Currently I have a led clock that projects the time on the Ceiling so that I don't have to look around to see what time it is, if I wake up early by mistake.  now that I have a Apple Watch mode night next to my bed stand, it would be cool to number ' Hey Siri, what time is "and get the time without opening my eyes!

    Is this possible? Apple Watch locks when it is not on my arm. Siri doesn't seem to be working while it is locked

    Hello

    No, it is not currently possible to use "Hey Siri" while Apple Watch is in bedside Mode (or Siri can be used in this mode by pressing the digital Crown).

    If you want to suggest that Apple consider adding support for Siri in Mode bedside table as a new feature, you can do so here:

    https://www.Apple.com/feedback/watch.html

  • Control PCLK when using the PXI-6534 in e/s mode

    I use ports 0 & 1 on the PXI-6534 in e/s model mode and also use output control in the mode of e/s to unstrobed for simple.  Users manual says in the mode of e/s model the PCLK control is not used, but the mode of e/s model seems to put down (or maybe he defines as an entry).  This a problem for me because I expect to PCLK to stay a high return which I set earlier.  Does anyone know how to set up the PXI-6534 in e/s model mode so that this does not affect PCLK... He's going to stay high?

    Thank you.

    Jim

    Hi Jim,.

    According to page 2 and 3 of the PXI-6534 user manual, if you configure a group to perform i/o, associated for this group synchronization control lines are not available in the form of additional data lines. The knowledge base, here, explains this limitation for the PXI-6534. In summary, port 4 is reserved once you are in e/s handshaking mode or a model and cannot be used as data lines additional unstrobed.

  • When you use the PC, my screen goes to mode analog 'save energy' automatically detect.

    When using PC, my screen goes to mode analog 'save energy' automatically detect (I think this is what he says is near him anyway), he will come back for a minute, then choosable these words to me and go black (mainly off), once again.  Can someone help me?
    original title: screen goes black

    Hello

    Were there any changes made to the computer before the show?

    This problem may occur if computer power plan settings set the monitor to turn off after a specific time.

    Please follow the steps.

    a. click the Start button.

    (b) in the search box to start, type Power Options and press ENTER.

    c. click change plan settings.

    d. Select never from the drop down menu to turn off the display and put the computer to sleep.

    e. click save changes.

Maybe you are looking for

  • While the iCloud recovery backup... continue to go back to the screen HELLO?

    I am currently trying to reactivate an iPhone with the last backup to iCloud. The iPhone asked me for the first update to iOS 9.3.1 (because the previous backup on previous iPhone did in 9.3.1 I guess... (and although this new iPhone showed 9.3.1!...

  • NB300-108 replacement circuit

    Hello I spilled a little liquid on my NB300 (only 6 months) and the circuit board needs to be replaced. I took it in a few places repair, but they could not locate the circuit board. Can someone suggest the most economical way to have repaired. Thank

  • Next version of the iPhone can put the Nepali language

    Next version of the iPhone can put the language Nepali kybo

  • Alarm time VeriStand

    Hey,. I wonder if there is a way to get the time that alarm was triggered in a procedure. Perhaps there is an easy way that I'm missing, but I would like to be able to compare the time between two alarms being triggered. Thanks for the help, Kevin Ke

  • new curriculum set to take pictures? by default

    I have shutterfly Express uploader on desktop, but as it as my default photo program how I would get it in there?