Using a Repeater wifi with the WRT54G2-cannot get internet access

Similar Questions

• Can't listen to muscia or whatever it is that something seems to be worng with the speakers cannot get no noise?

  Can't not listen to anything on my pc no coming out, please help someone!

  Hi zakhottie,

  I suggest you to run the fix it Tool from the link below which will automatically diagnose and repair problems with sound and audio on your computer.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Hope this information is useful.
  Karena R - Microsoft Support
  --------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• DAC 11.1.1.6.4 fails with the error cannot get columns: ORA-01403: no data found

  Hello

  We strive to run a full charge in DAC, but it is a failure.

  The S_ASSET table is empty and therefore, we get the error

  Could not get column: ORA-01403: no data found

  We were not facing this error in DAC 10 g but after upgrade to DCA 11 g, this task has no place if the array is empty. How remove this restriction and DAC will work perfectly even if the tables are empty to full charge?

  CAD DETAILS

  Console Administration Oracle BI DW

  CAD build a 11.1.1.6.4.20121119.2022 Build date: November 19, 2012

  Management Console to install, configure, and administer the Warehouse Analytics of Oracle Business

  Schema version - 47, Index version - 36, repository version - 6, data version Seed - 16

  INFORMATICA - VERSION9.0.1 HF2

  
  

  Here's the log of IMG_BUILD - S_ASSET when this task was running in DAC 10 g. The task facing any problem when S_ASSET table was empty.

  [code]

  2013-12-23 15:34:29.644 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET began.

  the number of days of prunes: 4

  After change data capture: 2013-12-19 12:23:19.332 in full Mode.

  2013-12-23 15:34:29.69 - execution:

  TRUNCATE TABLE S_ETL_I_IMG_6

  2013-12-23 15:34:29.89 - executed successfully.

  2013-12-23 15:34:29.9 - execution:

  TRUNCATE TABLE S_ETL_R_IMG_6

  2013-12-23 15:34:30.145 - executed successfully.

  2013-12-23 15:34:30.16 - execution:

  TRUNCATE TABLE S_ETL_D_IMG_6

  2013-12-23 15:34:30.198 - executed successfully.

  2013-12-23 15:34:30.236 - execution:

  INSERT / * + APPEND * / INTO S_ETL_R_IMG_6

  (ROW_ID, MODIFICATION_NUM, LAST_UPD)

  SELECT

  ROW_ID

  MODIFICATION_NUM

  LAST_UPD

  Of

  S_ASSET

  WHERE

  LAST_UPD > TO_DATE ('2013-12-19 12:23:19 ',' ' YYYY-MM-DD HH24:MI:SS)

  2013-12-23 15:34:30.968 - executed successfully.

  2013 12-23 15:34:30.989 - execution of deleting duplicates rowid.

  2013-12-23 15:34:31.01 - successfully deleting duplicates rowid.

  2013-12-23 15:34:31.27 - execution:

  DROP VIEW V_ASSET

  2013-12-23 15:34:31.566 - executed successfully.

  2013-12-23 15:34:31.569 - execution:

  CREATE VIEW V_ASSET AS

  SELECT

  *

  Of

  S_ASSET

  2013-12-23 15:34:31.743 - executed successfully.

  2013-12-23 15:34:31.78 - execution:

  SELECT COUNT (*) IN S_ASSET

  The County is: 0

  Executed successfully: CHANGE CAPTURE: IMG_BUILD - internal S_ASSET

  (Number of attempts: 1).

  Executed orders:

  IMG_BUILD - internal

  2013-12-23 15:34:31.851 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET has finished running with the completed state.

  The same task, IMG_BUILD - S_ASSET fails when it is running in DAC 11 g, because the table is empty. Here is the log for the failure of the task to 11g.

  [code]

  2013-12-27 21:21:47.497 acquisition of resources

  2013-12-27 21:22:20.33 acquired resources

  2013-12-27 21:22:20.787 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET began.

  the number of days of plum: 5760

  After change data capture: 2013-12-23 21:19:19.233 in full Mode.

  21:22:21.211 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_I_IMG_6

  2013-12-27 21:22:22.384 - executed successfully.

  21:22:22.389 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_R_IMG_6

  2013-12-27 21:22:22.532 - executed successfully.

  21:22:22.534 2013-12-27 - execution:

  TRUNCATE TABLE S_ETL_D_IMG_6

  2013-12-27 21:22:22.546 - executed successfully.

  21:22:22.55 2013-12-27 - execution:

  INSERT / * + APPEND * / INTO S_ETL_R_IMG_6

  (ROW_ID, MODIFICATION_NUM, LAST_UPD)

  SELECT

  ROW_ID

  MODIFICATION_NUM

  LAST_UPD

  Of

  S_ASSET

  WHERE

  LAST_UPD > TO_DATE ('2013-12-23 21:19:19 ',' ' YYYY-MM-DD HH24:MI:SS)

  2013-12-27 21:22:22.614 - executed successfully.

  2013 12-27 21:22:22.616 - execution of deleting duplicates rowid.

  2013-12-27 21:22:24.72 - successfully deleting duplicates rowid.

  Could not get column: ORA-01403: no data found

  FAULT INFO: Error executing: CHANGE CAPTURE: IMG_BUILD - internal S_ASSET

  MESSAGE: com. Siebel.Analytics.etl.Execution.exceptions.ChangeCaptureTaskFailedException: Change Capture failed.

  EXCEPTION CLASS: java.lang.RuntimeException

  com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:536)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)

  com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  java.lang.Thread.run(Thread.java:619)

  : CAUSE:

  MESSAGE: change Capture failed.

  EXCEPTION CLASS: com.siebel.analytics.etl.execution.exceptions.ChangeCaptureTaskFailedException

  com.siebel.analytics.etl.etltask.ChangeCaptureTask.executeChangeCapture(ChangeCaptureTask.java:93)

  com.siebel.analytics.etl.etltask.ChangeCaptureTask.doExecute(ChangeCaptureTask.java:46)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)

  com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)

  com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.Executors$ RunnableAdapter.call (Executors.java:441)

  java.util.concurrent.FutureTask$ Sync.innerRun (FutureTask.java:303)

  java.util.concurrent.FutureTask.run(FutureTask.java:138)

  java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)

  java.lang.Thread.run(Thread.java:619)

  (Number of attempts: 1).

  IMG_BUILD - internal

  2013-12-27 21:22:31.526 CHANGE CAPTURE: IMG_BUILD - internal S_ASSET has finished running with the Failed state.

  [[code

  
  

  The CREATE VIEW privilege was missing from the CAD database user, therefore, was not to create the step. I have granted CREATE VIEW and all is well.

• Cannot get internet access because I need a network card driver?

  I'm having a devil of a time trying to find how do I down load a NIC on a flash drive can I install it on my laptop Acer 5253 which will not let me connect to the wifi. I can download the drivers from the web, but not on a usb key then I can plug it into the laptop. I can't get on internet with the Acer laptop so Microsoft can not analyze the problem, and Acer will not even talk to me because the laptop is out of warranty. I am because of my wits end I have no intelligence of the computer. Can anyone help?

  Why do you think 'I can download drivers on the web, but not on a key usb then I can plug it into the laptop"?

  This is the right way to do it.

  The Acer Aspire 5253 download page has two NIC drivers wireless, one for a card equipped with a chip Atheros and the other for a card equipped with a Broadcom chip.

  I'm not familiar with how Acer does things; It is possible that if you go here and enter the serial number or SNID Acer, you can get a description of the hardware installed in your particular unit--> http://www.acer.com/ac/en/US/content/system-information

  Otherwise,.

  • Open Device Manager (click the start ORB, type device manager in the start search box and press enter).
  • Expand the "Network adapters" section and look at the entry for your wireless adapter.  You should be able to determine if you have an Atheros or Broadcom device by looking at the name.
  • If the name does not help, even on the 'Détails' tab, go to the Details tab, select "Hardware ID" in the drop-down list and post back with the first line up where 'SUBSYS' starts.  If you have Windows 7, you can right click > copy these data

  Example: PCI\VEN_14E4 & DEV_16B1& SUBSYS_96B11849 & REV_10

  Ensure the bold part

  If you have Windows 7 and have an Atheros device, download this driver --> http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Atheros_9.2.0.439_W7x86W7x64_A.zip?acerid=634601180335904424&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%205253&OS=712&LC=en&BC=ACER&SC=PA_6

  If you have Windows 7 and have a Broadcom device, download this driver --> http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Broadcom_5.100.82.87_W7x86W7x64_A.zip?acerid=634605483323458996&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%205253&OS=712&LC=en&BC=ACER&SC=PA_6

• Can I use an SD card with the new MacBook?

  Looking to buy a new MacBook. From what I can tell there is no SD card reader.  I don't see any accessory adapter for SD readers either.  Is it possible to use an SD card with the new MacBook?  Thank you!

  Only I can find is for iOS devices > > http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

  On the SDXC - Apple Support and SD card slot

  I hope someone will find an adapter for you.

• I can't get the tabs to work, opening with the mouse, cannot be closed only in groups that market

  I was obliged to upgrade of hate, has lost most of my applications, cannot get tabs to work, cannot change the tabs with the mouse, cannot close the tabs,
  UNLESS I go to the tab and then group I have a button close the tab or change the tabs but that is a huge pain. Yes, I opened
  tabs mix more and ticked all the boxes, closed, reopened, restarted nothing works

  Well, don't ask me why, but I logged in today and everything works
  don't know why or how but tabs suddenly works, so if anyone has this problem I don't know how to tell you to fix said WVREDNECK

  I was obliged to upgrade of hate, has lost most of my applications, cannot get tabs to work, cannot change the tabs with the mouse, cannot close the tabs,
  UNLESS I go to the tab and then group I have a button close the tab or change the tabs but that is a huge pain. Yes, I opened
  tabs mix more and ticked all the boxes, closed, reopened, restarted nothing works

• Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Is it possible to use iCloud shares photos with the two opening and Photos at the same time?

  Non - PEAK is not a feature of iPhoto or Aperture - this is new with Photos

  LN

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• This protocol uses Agent to communicate with the Service

  Hello everyone, this is my first post in this forum and I want to shoot a question if someone could help me.
  
  I guessed that the communication between the api and the server at the time where the user will put api HQAPi = new HQApi (...) is with the http or https protocol, depends on the value introduced in the conf file.
  
  I would like to know what protocol uses agent to communicate with the service. I would like your ideas.
  
  Thanks in advance.

  Hello

  Welcome to the forums!

  Could you clarify your question a bit more? Looking for agent-> server HQ communication or agent-> communication monitored service?

  If this is an agent-> HQ server then they communicate with each other using foam which is a specific HQ communication protocol.

  If he's an agent-> monitored service it depends on the service.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• trying to UN-ininstall print driver error message: could not remove the HP LaserJet 1020 driver. The specified printer driver is currently in use. __Failed to remove the hplj1020.inf package. Access is denied.

  I have a new win 7 and have a lot of trouble installing an HP laserjet printer.

  When you try to remove the drivers under properties of the print server, I get the following message:

  "Cannot remove the HP LaserJet 1020 driver. The specified printer driver is currently in use.
  Impossible to remove the hplj1020.inf package. Access is denied. »

  someone knows what's the problem?  the prnter is not yet connected.  Must not be in use.  The problem I had was that the stuff sent to the printer seems to sit and take 15 ins to print a test page.

  How can I remove the drivers?

  Stop the print spooler service, and then start the print spooler service.  Now, delete the print driver and packaging. Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• Cannot get internet connection through wireless network

  I have a Sony VAIO laptop that came with Vista 32 bit and went from 7 Home Premium 32 bit.  I connect to the internet via my Ethernet via a DSL modem with no problems.  When I try to use the edge Intel 4965AGN wireless to connect to my DLink 655 Wireless N Gigabit router, it appears that it connects to the network, but there is no internet connection.  Both the router and the edge Intel have the latest drivers and the encryption is set on AES, WPA2-Personal.  Some additional information:

  I have desktop computer Dell with a DLink USB WiFi and it connects to the network and gets internet

  I constantly get the message from Windows saying: Windows has detected an IP address conflict with another computer on the network.  I restarted the router several times to no effect.

  In network and sharing Center (of course the troubleshooting network said he found nothing) the network appears as a Public and unidentified and it gives me no option to change it to a home network.

  I tried to connect to other networks public wireless (hotspots) and I can't connect it

  Hello

  Something is wrong with the TCP/IP parameters.

  Autoconfiguration IPv4 address:169.254.1 52.88
  IPv4 subnet mask: 255.255.0.0
  Autoconfiguration IPv4 address: 192.168.0.1
  IPv4 subnet mask: 255.255.255.0
  IPv4 default gateway:

  This 169.254.1 52.88 is the IP by default Windows assigns when there is no DHCP server, this isn't a working IP address.

  The second IP address is the IP address of the Wired card. That is why router conflicted reports.

  Configure the two cards for full Auto obtain IP and DNS.

  Then do a WinSock and TCP/IP updating.

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP just replace the command typed with.

  netsh interface ipv4 reset Press enter

  netsh interface ipv6 reset Press enter

  ipconfig/flushdns press Enter

  Restart your computer.

  Jack-MVP Windows Networking. WWW.EZLAN.NET