using activeX causing problems

Similar Questions

• I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I h

  I installed the latest version of flash player and it said installed successfully and I can use it very well, but when I checked the system requirements do not match. She required 2.33 ghz and I 2.13 ghz. then that cause problems on my computer? I have an intel i3 proccessor, windows 7, internet Explorer.

  All processors Intel i3 having at least 2 hearts, your specifications far exceed the requirements; See http://ark.intel.com/products/family/75025#@All

  I have some computers with much slower processors, and Flash Player 14 works perfectly well on them also.

• It will cause problems if my new iMac has the same id and password that my old iMac that I still have and use

  It will cause problems if my new iMac OS 10.11.3 5 k has the same user id and password as my old 2008 imac OS 10.9.5

  No it just means that you can download and sync past purchases and data to iCloud

• Management of Popups in Excel using ActiveX

  I'm having a problem similar to the problem that is referenced in this post:

  https://forums.NI.com/T5/LabVIEW/handling-popups-of-Excel-while-editing-it-via-Active-X-control/TD-p...

  The difference being...

  My company has a "database" Excel that stores all our product information. At the start of my application, I read this database using ActiveX. Recently this Excel sheet has been updated to include new features by someone else in my company.

  Now, when you open this particular spreadsheet, I get this message:

  

  It does not come to the front of the screen, and unless the user realizes that it is for the LabVIEW program seems to hang up, causing the user to close the LabVIEW program, because they do not realize that LabVIEW is waiting on Excel, which is waiting on the user to make a selection on this popup.

  In the post that I quoted above, they get around this by using a knot of property with the property 'Alerts', set to false. This works to hide mistakes but doesn't seem to work for this instance.

  Is it possible, via ActiveX, to "click" the button "Update only ' without the user having to do this.

  OR

  The worst case scenario, is there a way to bring this popup forward to alert the user that Microsoft Excel requires an entry?

  Thank you

  If someone stumbles on this page looking for a solution, here's how I ended up solving the problem:

  http://support.Microsoft.com/kb/826921

• Firmware update recent Airport 7.6.7 causing problems with VoIP

  Hi all

  Firmware update of recent Airport 7.6.7 causing problems with VoIP.

  Unable to connect voip since update...

  Any help appreciated.

  Thank you

  It might be useful to know what VoIP that you use and what type of problem the update affects your VoIP.

  My MagicJack & NetTalk lines properly.

  Jim

• "-2146827284" error code when you try to open a workbook using ActiveX

  Hi all

  I have a problem using ActiveX to open excel files. I get the error code '-2146827284' (unknown error) when trying to open a workbook. This problem occurs on a single machine, that I work with, on the other, it works very well. All machines have the same configuration, Excel97 and Excel2007 installed on them.

  Any ideas?

  Thank you

  
  

• Writing Excel using activeX - missing data after column IV

  Data size is about 400 (col) x 100 (row), save in excel using ActiveX, it cuts the data only with 256 columns, other IW data... are missed.

  

  How to solve this problem in LabVIEW? I save the file in .xlsx format.

  

  Pls ignore this question because I already solved the problem, thanks to you all!

• KB975496 and causing problems KB980408.

  These two updates that I just installed caused problems with my C drive.  The disk check said he cannot work while the disk is used and how have it run at startup says it cannot do the job and use the system restore.  System Restore says that it cannot function without a check disk first.  What should I do?

  Depending on the operating system you have, and if your hardware vendor as long as you media appropriate, you can make a drive that started at the Windows install DVD while repair.

  In Vista (?) and Windows 7 boot from the installation DVD allows you to use repair tools, which is a command line.  The type of command line

  CHKDSK C: /F

  and a repair disc should be performed.

  Caution:-the last time I tried this it turns out that my hard drive was not physically, and for this reason, the disk check has failed, completely destroy the file system and cause a complete data loss.  REAR FIRST.

• Microsoft Access with ActiveX control problems

  I did a bit of research on this topic and have found several answers that are nearby, but do not address my real problem.

  I would use ActiveX control Microsoft Access, especially to create new database files without having to copy an empty file that I've stored somewhere I also can't stand it when I don't get something to work, so it's now something personal also.

  Anyway, when I run a simple VI to open the reference can be created, Access._Application, I get the error: "error 3005 occurred at the opening of the Automation: object specified is not can be created in Access.vi. I have tried many of the common responses to this problem, such as navigation for the library in ActiveX window and try to save it with regsvr32, but the file is msacc.olb, which cannot be registered with regsvr32.exe. I have attached the original VI and I tried on 3 different PCs, all with slightly different installs of Office, but with Access 2007. If anyone can help me understand this point, I would be very happy.

  Thank you

  Your vi made the same error on my machine.  Then, I removed the Access._Application reference, click right on the reference entry and chose to create a control.  Then I changed the Active-X class by accessing my version of reference computers ("Access._Application.12").  The same vi took place without error.

  The class is still shows as Access._Application, which indicates that there may be an incompatibility which is not visible.

  When and activeX node does not work when copied from any other machine, it is recommended to replace each node that is generating the error and reselect the properties and methods.

• Recovery system causing problems with the size of the screen.

  Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, with a big problem.  I bought a monitor 20 "a few months ago.  It worked fine before the recovery is done.  Since the resumption, the display is smaller, as if I still had the old monitor 15 '' on the system.  I did that the driver for the monitor is correct and up-to-date.  I found a way to enlarge the display of the size of the screen in an online search, but it does not clear up the problem.  For example... If I go to a site like the Pogo, the bottom of the site is almost normal size for the monitor, but the game pop up displays the size of the screen 15 ''.  I tried everything I know and can't get this last problem fixed.  Any suggestions would be greatly appreciated.  I also checked the resolution and makes sure it's OK for this monitor.  Thanks for your help.

  Do you have the driver from Microsoft or directly from the manufacturer?  If Microsoft, go to the manufacturer website and download THE latest drivers applicable on your screen and the version of Vista (Microsoft sometimes cause problems).  Does the monitor require any firmware - if so, download and install that too much of the manufacturer's web site.  You can also update the video card drivers and firmware just in case it is the underlying cause of the problem - again go to the web site of the manufacturer to get the files rather than using those available through Microsoft.

  Go to start / Control Panel / customization / display settings / and make sure that your monitor is displayed in the drop-down list.  If this is not the case, click on the box and see if you can find your monitor and then select and make the box extend the desktop to this monitor is selected.  Go into the advanced settings, click list all Modes and try one at the top, if it is not already selected (assuming that it is appropriate for your monitor).  If this does not help, try others that are compatible with your monitor to see if you can find one that allows you to achieve your goals.  It may not work, but it's probably worth a try.

  Other than that, I don't know what to think.  You already seem to have covered most if not all of the bases.  If the above does not work, maybe someone else review this thread will have other ideas to offer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Frequent hard drive exchanges are causing problems for activation of Windows 7?

  I am new to Windows 7.    I frequently switch (turn) the hard drive on my system - say every 6 weeks or more.  I use the same set of 2-3 disks and restore my system from a disk image every time when I exchange them.   Change the drive often happens to cause problems with the activation of Windows 7?   Thank you.

  Hi Lone Star,

  Change the hard drive on systems not prompt swap you for activation but after that the HDD on another system if the operating system is validated activation would be asked that the physical address of machines would have changed.

• Window update causing problems of printer driver

  Hi, I have a laptop running XP and router wireless computer (WAG54G) and a set of HP6380 in one. About 2 nights ago an update to Windows Installer by himself and rebooted the laptop (even though I have some turned off automatic updates what they seem to be screwing with anything these updates produce still grr)...

  I went to try and print and to found the 6380 was absent from the list of available printers... The problem is not with the wireless network (as it is trendy and functional). I don't know what it does the update of windows... but when I tried to reinstall the drivers for this printer from the disc, he acknowledged that they were already installed... So I uninstalled them instead (and it is taken up only parts of the driver remained and he removed these pieces).

  Then I tried to do a fresh driver... install that took a long time because it got stuck at the end... Finally, he came up with an error and so I tried to introduce him, HP - and received click on a desktop icon... (Icon HP - XP Installation). I tried it but it tells me to 1) Reinstall driver (done twice -) solve printing problems wireless (not a problem at this point given that I have no printer driver and I can use the network wireless for other things very well) well tried anyway... or 2

  Anyone has any suggestions please > in the past when Windows updates have caused problems, I used the system restore to roll back, but this is only a temporary solution - as Windows insists on the updates I want!

  Thank you very much!

  If you have the original HP software CD, look in the folder of the ccc/utils for a L3_unintsall (or similar).  Run for an uninstall very full.

  Reset.

  Now, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.  DO NOT reinstall from the CD (a good rule is in general not the CDs software, but to go to the website of the manufacturer for the latest and best).

• I have a personal account of CC.  I'll get a CC account through my work for my machine here soon.  In the meantime, I can run my CC on my work computer or which will cause problems in the future?

  I have a personal account of CC.  I'll get a CC account through my work for my machine here soon.  In the meantime, I can run my CC on my work computer or which will cause problems in the future?

  When you install the cloud on a computer, the use of the programs is related to the Adobe ID used for installation

  Then use the cloud with a different ID, you need to disconnect from your personal account and sign in to your professional account to install and use

  If you would eventually use only the ID of your work on your work computer, it would probably be best to completely remove your personal ID and Cloud programs before you install using your work ID.

  Sign out of your personal account... Uninstall... to run vacuuming...

  -http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)

  -using the vacuuming after uninstalling and prior to the relocation is necessary

  -https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

  -Restart your computer... Log in to your account... Install

• enable intel XD, it will cause problems?

  I have ESXI4.1 hosts, hostsvc/hosthardware-vim - cmd command shows that xD is disabled. I want to activate XD, so that I can use EVC on the cluster. I'm having a failure on the site shut down all virtual machines, reboot the host and activate XD in the BIOS. Activating XD on host & VMs already build will cause problems. The guests are windows 2003 and 2008 R2.

  No it shouldn't cause any problems-

• Flash and how it interacts with Web sites and if it causes problems.

  Hi, I am very new to the Adobe's Flash. I'm an in-house designer. I'm about to take a course in Adobe Flash and my boss asked me if you use Flash on our website will cause problems. Currently there is no Flash on our Web site. If we add some Flash people who visit our site will have questions? If so, what would they meet? Thanks for any help!

  The main problem you may have is with the users using hendheld devices such as iPhones and iPads that don't support the Flash player - and on into the future where Flash player support for mobile devices is likely to end altogether.  In such cases, you will need to provide alternative content and Player detection when no player is detected.