Using Cisco VPN Client in Windows 7 Professional 64 bit

Hi all!
I need to use Cisco VPN Client to connect to my server in the company, because my company uses lotus notes Server, I have to connect Cisco VPN to access e-mail. But now my windows version is Windows 7 Pro 64 bits that cannot directly install this application, I already installed XP Mode and creatde shortcut to Windows 7, I plugged the Cisco VPN to my Cisco VPN server, but I can not access the server, Pls help me and show me how to solve this problem

Open the XP VM itself, do not use the shortcut that was published in
the W7 boot menu. You need to install Outlook / your email client
Inside the virtual machine, as well as on the side of W7. You can point to the same
PST files if you have local PST files, but you just can't open them in
at the same time of W7 and XP VM.

There is no way to bridge using the shortcut of publishing app

Some people have reported success with the third party IPSec
replacements as customer universal shrew or the NCP. Your IT Department.
would like to know if these are supported

:

> Hello all! I need to use Cisco VPN Client to connect to my server in the company, because my company uses lotus notes Server, I have to connect Cisco VPN to access e-mail. But now my windows version is Windows 7 Pro 64 bits that cannot directly install this application, I already installed XP Mode and creatde shortcut to Windows 7, I plugged the Cisco VPN to my Cisco VPN server, but I can not access the server, Pls help me and show me how to solve this problem
Barb Bowman www.digitalmediaphile.com

Tags: Windows

Similar Questions

  • Different classes using Cisco VPN Client VPN

    Hello

    on a cisco ASA 5510, I defined a vpn group used for remote teleworkers who have access to the entire LAN using Cisco VPN Client 4.8.

    I would give to others of this client, but I need to limit their access to LAN resources, which means that I have to have two types of users:

    Remote LAN access

    access to only certain IP addresses

    Both must use the Cisco VPN client.

    How can I do?

    Thank you

    This link should help.

    http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080641a52.shtml

  • Slow initial connection using Cisco VPN Client

    I am currently using Cisco VPN Client v5.0.07.0290.  Whenever I start my connection, it takes me about 90 seconds for the prompt to display authentication and another ~ 90 seconds to finish the auth. and connect successfully.  I have another computer laptop w / the same WIN7 OS and version of Cisco VPN Client and he ends the connection to<30 sec. ="" why="" is="" this? ="" any="" suggestions="">

    Hi Sergio,

    You import the .pcf for the VPN Client file? If so, please try to recreate a new file .pcf locally on the machine itself and try to connect. Let me know how it goes.

    Thank you

    Delvallée

  • Professional Windows Vista crashes when you use Cisco VPN Client 5.05.0290

    I have a Dell Latitude E6400 Windows Vista Business (32 bit) operating system. When I go to turn on the VPN client, I get invited to my username / password and once entered, the system just hangs. The only way to answer, it's a re-start. I took action:

    1 disabled UAC in Windows
    2 tried an earlier version of the VPN client
    3. by the representative of Cisco, I put the application runs as an administrator

    If there are any suggestions or similar stories, I would be grateful any offereings.

    It IS the COMODO Firewall with the 5.0.x CISCO VPN client that causes the gel. The last update of COMODO has caused some incompatibility. I tried to install COMODO without the built in Zonealerm, but it is still frozen. The only way to solve it is to uninstall COMODOD. Since then, my CISCO VPN client works again...

  • Cisco VPN Client and Windows XP VPN Client IPSec to ASA

    I configured ASA for IPSec VPN via Cisco VPN Client and XP VPN client communications. I can connect successfully with Cisco VPN Client, but I get an error when connecting with the XP client. Debugging said "misconfigured groups and transport/tunneling mode" I know, they use different methods of transport and tunneling, and I think that I have configured both. Take a look at the config.

    PS a funny thing - when I connect with client VPN in Windows Server 2003, I have no error. The only difference is that client XP is behind an ADSL router and client server is directly connected to the Internet on one of its public IP of interfaces. NAT in the case of XP can cause problems?

    Config is:

    !

    interface GigabitEthernet0/2.30

    Description remote access

    VLAN 30

    nameif remote access

    security-level 0

    IP 85.*. *. 1 255.255.255.0

    !

    access-list 110 scope ip allow a whole

    NAT list extended access permit tcp any host 10.254.17.10 eq ssh

    NAT list extended access permit tcp any host 10.254.17.26 eq ssh

    access-list extended ip allowed any one sheep

    access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh

    sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0

    tunnel of splitting allowed access list standard 192.168.121.0 255.255.255.0

    flow-export destination inside-Bct 192.168.1.27 9996

    IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0

    ARP timeout 14400

    global (outside-Baku) 1 interface

    global (outside-Ganja) interface 2

    NAT (inside-Bct) 0 access-list sheep-vpn

    NAT (inside-Bct) 1 access list nat

    NAT (inside-Bct) 2-nat-ganja access list

    Access-group rdp on interface outside-Ganja

    !

    Access remote 0.0.0.0 0.0.0.0 85.*. *. 1 2

    Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1

    Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1

    Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1

    Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1

    Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1

    Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1

    Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1

    Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1

    dynamic-access-policy-registration DfltAccessPolicy

    Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT

    Crypto ipsec transform-set newset aes - esp esp-md5-hmac

    Crypto ipsec transform-set esp-3des esp-md5-hmac vpnclienttrans

    Crypto ipsec transform-set vpnclienttrans transport mode

    Crypto ipsec transform-set esp-3des esp-md5-hmac raccess

    life crypto ipsec security association seconds 214748364

    Crypto ipsec kilobytes of life security-association 214748364

    raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

    vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1

    card crypto interface for remote access vpnclientmap

    crypto isakmp identity address

    ISAKMP crypto enable vpntest

    ISAKMP crypto enable outside-Baku

    ISAKMP crypto enable outside-Ganja

    crypto ISAKMP enable remote access

    ISAKMP crypto enable Interior-Bct

    crypto ISAKMP policy 30

    preshared authentication

    3des encryption

    md5 hash

    Group 2

    life 86400

    No encryption isakmp nat-traversal

    No vpn-addr-assign aaa

    Telnet timeout 5

    SSH 192.168.1.0 255.255.255.192 outside Baku

    SSH 10.254.17.26 255.255.255.255 outside Baku

    SSH 10.254.17.18 255.255.255.255 outside Baku

    SSH 10.254.17.10 255.255.255.255 outside Baku

    SSH 10.254.17.26 255.255.255.255 outside-Ganja

    SSH 10.254.17.18 255.255.255.255 outside-Ganja

    SSH 10.254.17.10 255.255.255.255 outside-Ganja

    SSH 192.168.1.0 255.255.255.192 Interior-Bct

    internal vpn group policy

    attributes of vpn group policy

    value of DNS-server 192.168.1.3

    Protocol-tunnel-VPN IPSec l2tp ipsec

    Split-tunnel-policy tunnelspecified

    Split-tunnel-network-list value split tunnel

    BCT.AZ value by default-field

    attributes global-tunnel-group DefaultRAGroup

    raccess address pool

    Group-RADIUS authentication server

    Group Policy - by default-vpn

    IPSec-attributes tunnel-group DefaultRAGroup

    pre-shared-key *.

    Hello

    For the Cisco VPN client, you would need a tunnel-group name configured on the ASA with a pre-shared key.

    Please see configuration below:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

    or

    http://tinyurl.com/5t67hd

    Please see the section of tunnel-group config of the SAA.

    There is a tunnel-group called "rtptacvpn" and a pre-shared key associated with it. This group name is used by the VPN Client Group name.

    So, you would need a specific tunnel-group name configured with a pre-shared key and use it on the Cisco VPN Client.

    Secondly, because you are behind a router ADSL, I'm sure that's configured for NAT. can you please activate NAT - T on your ASA.

    "crypto isakmp nat-traversal.

    Thirdly, change the transformation of the value

    raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map

    Let me know the result.

    Thank you

    Gilbert

  • Impossible to install the Cisco VPN Client on Windows 7

    Hello

    After an uninstall successful VPN Cisco version 4. I try to install the Cisco VPN Client 5.0.07.0290 version.

    But after the launch of vpnclient_setup.msi, the wizard starts. When I click on the next button, I get the following message: "installation ended prematurely because of an error".

    As an attachment, I add the details of the discovery of the error in the logs of windows (logError.txt) and the logs generated by the MSI installer in verbose (log2.txt) mode.

    My computer is a lenovo W500 with Windows 7 64-bit and 4 GB of memory (compatible with the requirements of the Cisco VPN Client).

    I have administrative privileges on this computer.

    Please help me!

    I need to use it to connect to my corporate network.

    Thanks in advance.

    BR

    Jerome

    If you want to try another software, I know that works I used it up until cisco came out with a 64-bit client there. Is the 64-bit version of shrew 2.1.0 it worked very well, you will just need your file FCP of cisco for import into if you have. This will tell you if the client or your system at least.

  • Cisco VPN Client for Windows 7 and WWAN devices

    Hello

    Does anyone know when Cisco will release a VPN Client for Windows 7 update that supports devices WWAN using NDIS 6.2?

    Thank you

    Dave,

    End of the client VPN of life was announced. In my view, it is safe to say that no new features will be introduced.

    AnyConnect is the way to go (Alternatively Windows 7's native IKEv2 connection works in IOS).

    Marcin

  • Using Cisco VPN Client VPN

    Is it possible to use a private network virtual created with the WRVS4400N router with VPN Client from Cisco Systems (ver 5) software? (Although QuickVPN works very well.)

    Is it possible to use with Account customer VPN mode? Or is it possible to use with IPSec VPN (Tunnel) mode? If so, please provide together how to client-side and the router. Thank you!

    Unfortunately Small Business routers are not compatible with the Cisco VPN Clients. The Cisco VPN Clients have more parameters that are not available in the materials of the series of small businesses, so all we can use is the application of QVPN.

  • Cannot use Cisco vpn client

    Dear all,

    I have cisco vpn client v5.0.05.

    1 / when I lunch the customer, it connect to the asa, so I can't reach the network behind my ASA

    2 / when connected to the vpn client, I can not use my access to the internet, I configured splitunnel, but does not.

    3 / sometimes, cisco vpn client disable my network ip of the gateway card.

    Please, can someone help me?

    Concerning

    Can you please share the configuration of the SAA. There is no specific configuration that must be done on the vpn client.

  • Cisco VPN Client with Windows 7 Home Premium 64-bit

    I recently bought a new laptop with Windows 7 Home Premium 64-bit.   I need to connect to a VPN IPSEC to work.  I tried the current VPN client and after reading the posts in this group, I tried vpnclient-win-msi-5.0.07.0240-k9-BETA.exe.  When I tried to install the beta version, I get the following error message:

    Error 28011: Windows 64-bit is not supported by Cisco Systems VPN Client 5.0.07.0240.

    Any suggestion would be appreciated.

    Hello

    You should download the 64-bit version. vpnclient-winx64-MSI-5.0.07.0240-K9-Beta.exe is the version you tried to install the 32-bit version

    Thank you

    John

  • Cisco VPN Client follow-up

    Hello

    I have a Cisco 2821 and ASA 5510 VPN router in my network.

    Our remote users are using Cisco VPN Client 5.0.07 and I need to track on a server and keep their login information to generate reports for my manager.

    Could you please let me know how I can do this trick of surveillance?

    Thank you

    Mike

    It can be done by choosing one of three types of monitoring of the performance of the VPN:

    http://www.Cisco.com/en/us/docs/net_mgmt/vpn_solutions_center/1.1/user/guide/VPN_UG5.html

    I hope this helps!

  • How to use Windows 7 64-bit cisco vpn client?

    Hello

    I want to use the cisco vpn client to connect to my Institute.

    I use Windows 7 64-bit edition Home premium.

    I tried several options, but nothing has worked.

    Please suggest me the correct procedure to run on my Windows 7 64 bit Home Premium Cisco vpn client.

    Thanks in advance,

    Federico

    VPNclient is not yet supported on 64-bit windows.

    However, there is a beta version of the next 5.0.7 version that does.

    Have you tried this version? If so, what are the exact symptoms?

    Edit: you can download the 5.0.7 beta here

  • Cisco VPN Client causes a blue screen crash on Windows XP Pro (Satellite M30)

    Hello

    I have a Satellite Pro M30 running Windows XP Professional.

    After you start a vpn Tunnel via a customer of Cisco VPN (Version 4.6 and 4.7), the system crashes with a blue screen.

    I see that the key exchange is successful, but immediately after the vpn connection is established Windows XP crashes with a blue screen.

    Someone has any idea how to solve this problem?

    Perhaps by the updated device driver? And if so, which driver should be updated?

    Kind regards

    Thorsten

    Hello

    Well, it seems that the Cisco client is a problem.
    I m unaware of this product because it of not designed by Toshiba.
    I think that the drivers are not compatible with the Windows operating system.
    However, I found this site troubleshooting cisco vpn client:
    Please check this:
    http://www.CITES.uiuc.edu/wireless/trouble-index.html

  • Receive message "Validation of C:\WINDOWS\System32\VSINIT.dll failure" error message when trying to run Cisco VPN Client.

    windows\system32\vsinit.dll

    I try to run CISCO "VPN Client" connect from my PC at home for my work PC.

    Then, I get a message:

    Validation failed for C:\WINDOWS\System32\VSINIT.dll

    Any ideas?

    Martin

    Hello

    Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

    Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)

    If the steps above is not enough of it please post your request in the TechNet forum for assistance: http://social.technet.microsoft.com/Forums/en/category/windowsxpitpro

  • Unable to connect using the Cisco VPN client

    Hi all. I recently configured a 5510 ASA to allow remote access using the Cisco VPN client. The problem is that everything works fine when I connect using a modem classic or on a computer with a public address that I use for testing purposes, but whenever I try to connect with on an ADSL line, I can't access to the resources. I have connection and after that nothing, I can not achieve anything.

    I enclose the relevant configuration information in the attachment. Any help is welcome.

    Depending on the version, add...

    ISAKMP nat-traversal

    or

    ISAKMP nat-traversal crypto

    Should be all you need.

Maybe you are looking for