using DSC-W350 as webcam

How am I able to use my Sony DSC-W350 camera as a webcam? I have the selected video mode and its plugged into my Vaio. Do I need other software?

To use a digital camera as a WEBcam, the camera must have USB streaming mode. This camera photo and all the sony Cybershot cameras are not designed to use a webcam.

Tags: Sony Products

Similar Questions

  • Can I use my SONY Cyber-shot DSC-S5000 as webcam

    I have the SONY Cyber-shot DSC-S5000 can tell me that is it possible to use it as a webcam. If it is possible please tell me how to use it


  • How to use Camelio H20 as webcam

    Can anyone help?

    I recently bought the camcorder above.

    The manual indicates that the camcorder can be used as a * WEBCAM *.

    However, when I plug it into a PC or a laptop it does not recognize.
    I tried this on a laptop with Windows XP and a new PC with Windows Vista.

    I would appreciate any suggestions or comments!

    Thank you

    Kevin Bray?  :|

    Hello

    where did you read, you can use it as a webcam? I couldn t find anything like this in the manual mode.
    I think that the H20 cannot be used as a webcam.
    If you sign in, it appears in as 'USB Mass Storage Device' Device Manager

    Best regards

  • How to activate and use the built-in webcam

    built in webcam

    How to activate and use the built in webcam on my desktop Dell Inspiron 1?

    MikeViklund,

    Try to read...

    Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

    Rick

  • Live messenger won't open so I can make calls or use Skype with my webcam.

    Live messenger won't open so I can make calls or use Skype with my webcam.

    Now Windows Live Solution Center is offline for maintenance. When it's over, please repost in forum Messenger:
    http://www.windowslivehelp.com/default.aspx?aspxerrorpath=/forums.aspx

    This methos involves editing the registry...
    If you are not comfortable with editing the registry, please do not do.

    Start button > Search box, type regedit > press the Enter key > (uac prompt) > expand (click on the pointer before) HKET_CURRENT_USER > expand Software > expand Microsoft > expand MSNMessenger > expand PerPassportSettings > under PerPassportSettings, find 2 folders with a series of numbers > delete the two folders including their subfolders > window regedit.
    Restart the Messenger.

    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • What software shoud I use to capture an image using my built in webcam in windows 7 ultimate

    * Original title: webcam

    can what software I use to capture an image using my built in webcam in windows 7

    Hi Elizabeth,.

    Normally there will be a software provided by the manufacturer of the laptop computer or the manufacturer of the webcam to take pictures on the computer.

    You can see the laptop manual to check if the computer manufacturer has provided a software for visualization of the webcam on your computer and check if you have the option in the software to capture the image of the webcam on your laptop.

    Also contact the manufacturer of the laptop to learn more on how to take pictures of the webcam.

    For more information, see the links.

    See to believe (Applies to Windows 7)

    With the help of a webcam

    Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  • Camileo X 30-can I use it as a webcam?

    I was looking at the Toshiba Camileo X 30 and I was just wondering if it can be used as a webcam for programs such as Yahoo messenger-
    I can't find the answer to this anywhere.

    Hello

    I've read a lot about this camcorder. It seems to be really nice but unfortunately I didn't find any information on the "use as a webcam.
    So I think that's not possible.
    Otherwise, it seems to be an excellent camcorder;

    Welcome them

  • Skype crashes when you use everything related to webcam

    I just bought a LOGITECH HD WEBCAM C920

    When I'm working on Skype, Skype "crash"

    Skype crashes when: try to change the picture, trying to change the demo, trying to turn on webcam in Skype call.

    The webcam works on ANYTHING els.

    Also Skype webcam standart is: IP Webcam JPEG, MJPEG

    I think it's something but IDK how to remove...

    Make use of this tool VCamFix to remove the Webcam IP and any other virtual video Capture device.

    https://community.Skype.com/T5/Windows-desktop-client/Skype-freezes-when-calling-or-when-viewing-vid...

  • How to use the Satellite phone webcam internal?

    Please help me.
    On my new Toshiba, it has a webcam equipped.
    How can I connect with another webcam so I can contact them?
    Sorry for the stupid question.

    Hello

    The internal webcam works as the external webcam.
    Using a 3rd party software, Skype, for example, you can connect with other users.

    Welcome them

  • CAMILEO P30 - how to use it as a webcam?

    I'm able to turn on the webcam in function, although it is announced
    How use/configure?

    Rgds

    I checked the cam on http://www.toshiba-multimedia.com specification and also to wear out? s document, but manuals I na? t find a word on the webcam function.
    Can you please tell me where you found information on this mode of cam? Where is - this is announced? On the page of Toshiba?

  • Performance of Modbus using DSC static Variables

    I'm fairly new to using Modbus with LabVIEW.  On some dozens tools and APIs that can be used for a project, I train, I decided to try using an alias of shared Variables in Modbus registers in the project, which is a tool of DSC.  It seemed like a smart to go way.  I used Variables shared in the past, however, and I am aware of some of the questions that surround them, especially when the number of them begins to increase.  I will have only about 120 variables, so I don't think that's not too bad, but I'm getting a little worried...

    The way I started to do this was to create a new shared variable for each data point.  What I have noticed since then is that there is a mechanism to process multiple records at once using a table of values.  (Unfortunately, even if I wanted to use the table method, I probably couldn't.)  Modbus points that I am interfacing are for a custom device and the programmer does not disturb the consecutive use records...)  But anyway, I was wondering what might be performance issues that surround this API.

    I guess:
    (1) all caveates of shared variables apply.  These are really shared variables, but only DSC taught the engine of the SV to go read.  Is this fair?

    And I wonder:

    (2) there is no improvement in performance for reading a table of variables consecutive rather than reading each variable individually?

    (3) there performance above problems what shared variables have normally when you use Modbus specifically?  (E.g. how many times can you read a few hundred points of the device even Modbus?)

    Thank you

    DaveT

    Hi Dave,.

    Thanks for your good questions!

    (1) you are right that the caveates of shared variables apply. Generally, the major issues (conditions of race etc.) are not met because these variables are generally used as I/O.

    (2) with a large number of shared variables that are located on separate machines, it is best to use a table. However, with 120 variables read consecutively will not affect your overall performance, especially if you don't need to read everything at the same time.

    (3) overall, there is no any concerns of performance outside normal common variable concerns. Modbus and DSC are designed to be efficient and do a good job to maximize performance for you.

    I hope this helps.

    Best regards

    Anna L

  • I want to host my shared on a cRIO Variables, but use DSC to recording/alarm/SCADA

    Hello world

    What I try to do is the following:

    -Host variable static on my goals of RT (cRIO-9022) for reliability

    -Use the DSC module to log on to the database, followed by alarms, develop a distributed HMI

    The problem that I am running is that the engine of the DSC (seems) should the shared variables, it is taken to be hosted on this computer. The DSC engine cannot run on a real-time target.

    My ultimate goal is to create a wide network of the plant of the cRIO which are all connected to a central PC/server that runs DSC to collect and store data in a database. The HMI plant would also connect to the central server and get their information from there (not directly related to the process of cRIO). Is it possible / have ideas on how to do this effectively?

    Thanks for the help.

    I have a similar architecture.  I host my NSV libraries on of my cRIO and then create linked libraries 'mirrors' on the host computer that is running my HMI and logging of DSC in my database of the Citadel.  The project of LV has a tool to create related libraries.  I have also written a tool create me a library cloned with the original library on the cRIO liaison.  The NI PSP Protocol makes this type of very effective bound library.

  • How do I use the built in webcam on my computer laptop gateway?

    I have no idea how even turn on the webcam. I don't know even where to find the software for the webcam. I tried to use Skype and that no longer works. Is there anyway that I can fix this?

    On your front door, you have the Camera Assistant Software installed. It is not a start menu entry, but you should find that it listed in programs and features, if it is installed. If it is installed and running, you should find an icon in the notification area and that there should be a hidden toolbar that will show if you move your mouse cursor along the top of your screen. If you do not have the software installed you should be able to download and install it from the gateway support site. Jim - MVP Windows Live - moderator of the Forum - live a care - Live Mesh - Microsoft Security Essentials

  • I use the built-in webcam does not not on Vista Home Premium Lite Hp Compaq Presario CQ60-310ET

    I can't configure the driver for the webcam. error message: "necessary .inf file missing '.

    my computer running vista home basic standartly and my webcam worked but when I installed home premium lite my webcam is not more work please help me.

    Start uisng origianl systems. Home premium lite is not system provided by Microsoft. It is a modified version of the Microsoft System. This is why your webcam is not working. This version of 'windows' was caught lots of programs and files. Which is why this name change lite.
    Install original Edition Vista Home Premium you buy first, then writing issues.

    If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

    If your issue is resolved, please indicate then your wire is with solution.

  • Not able to use the built-in webcam

    I have a HP Pavilion dv6t - 6 c 00. I've upgraded to windows 7 ultimate which I had windows 7 Home premium that I could use the webcam, but now it displays an error when I open cyberlink youcam "warning, no webcam detected. Try connecting a webcam on your computer now. If you are using a built-in camera, make sure it is turned on." I looked and tried all the steps except the final step that the cyberlink youcam software does not allow me to click on the configuration settings. What should I do to activate my webcam?

    According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

Maybe you are looking for

  • Cannot display URLs

    Cannot display the complete rankings (http://www.pgatour.com/leaderboard.html) on the site of the PGA TOUR. I have information of the site COMPUTER he uses Javascript and pop-up windows. It's white table in "Content" FF.

  • How do the packages of windows patches?

    Is this scenario possible? 1-set computers on networks to download updates for a specific server. (it is possible) 2 do a windows update package update manully. 3. put this update on the server so computers download and install this update?

  • Update Windows 7 stuck at 0%

    I'm unable to download the Windows updates on my Windows 7 laptop (a Dell Inspiron 3542). When I try it just sits at 0% for the days without moving. I tried a lot of solutions validated for similar problems with no luck, so I thought I should post my

  • power in the taskbar icon is missing

    Didn't notice it until now, and when I went too much options I can't see the icon if you want to select power... So I went too system notification area icons, then click on activate or disable I have seen everything on but power he disappeared like y

  • How can I find Instructions for the use of Ctrl + F in Windows 7?

    I use Ctrl + F all the time, but lately, I'm having a problem in that the box 'Whole word' only does not appear so I can't check.  I couldn't find any kind of guide for the Ctrl + F function.  How can I locate it?