Using Facetime and iMessage with multiple phone numbers

I often travel internationally. When abroad, I get a local SIM card and so a local phone number. The problem is, anyone trying to send messages to my becomes phone number inside a bounced message until I go home. I am looking for a solution to this problem. What I want to do logically is to pass all my iMessage and Facetime messages to my phone number internal to any international phone number that I have the chance to have for the week or two, I'm out of the country, without actually transferring phone calls for the international number.

How can I accomplish this?

If during the passage of an international SIM inside, if I use a different AppleID to save the number, can I add the domestic AppleID to iMessage and Facetime and have forward SMS messages to internal phone to my phone number - actually give my 2 phone numbers for text and using Facetime?

What happens if I have a second iPhone (say one IS minimal) think I swap my SIM home - then I have two iPhones, one with an international SIM card and the other with an internal SIM card - then - I associate the two phones with the same AppleID (as if I had the same AppleID on an iPhone and iPAD) and make it work? In other words, a text Message sent to my iPhone internal SIM also towards my international SIM iPhone? This I must have my internal iPhone with me, or I can leave home and have it still work?

Any suggestions for other ways to solve this problem?

Thank you!

HU

You should always be available for the Apple ID that is associated with a phone number at one point.

SMS is out of scope for this, because it is a function of carrier managed by your carrier at that time and linked to your SIM card.

You put a new SIM card in your phone, FaceTime and Messages should register again your Apple ID for/with this new phone number shortly after. I do not think it deal only with the functions of automatic reference to FaceTime or Messages, because they are themselves a transfer function.

To the Apple server... "go get my friend with the Apple ID of [email protected]." Server Apple think and said: "OK, it uses the 888-555-1212 phone number right now, so I'll send your application there.

Ring, ring... you download a FaceTime application.

Tags: iPhone

Similar Questions

  • EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and IMessage.

    My iPod touch get now and then next alert message due to change on my iPhone.

    EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.

    Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.

    What is my apple ID used on other devices with the same name as my iPhone?

    I would be happy if anyone has an explanation of why I feel this strange behavior.

    When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.

    You said "by reason of change on my iPhone"

    What has changed on the iPhone?

  • can not activate facetime and imessage iphone 5

    I got my iphone brand new 5 Friday everything works fine! Really happy with it, as this is my first iphone. I tried to activate facetime and imessage, but it keeps failing. I reset the phone and other troubleshooting activities all to nothing does not. My service provider says it's a matter of Apple Apple says that it is the problem of my career. 7 hours trying to resolve this issue still not right. My apple id, it's all good so help someone?

    Who is the carrier? Also try the procedure described in this article

    If you get an error when you try to activate FaceTime - Apple Support or iMessage

  • Is anyone using slides and inkjet with iPad iPad Pro or current Air2?

    Larger than Pro iPad seems to be perfectly suited for use with ink & slide but Adobe and tutorials website lists the old model iPads as "compatible"?

    Is anyone using side and with great ink jet (8 "x 10") iPad Pro?

    If so, what apps do you use ink and slide with this larger unit?

    I've tried the original apps (using my fingers, only), and they work but are buggy on the iPad Pro.

    I am also interested to hear if anyone uses ink & Slide with the current iPad 2 Air?

    I checked the auditor of the model number of Adobe compatibility for both of the above, and it is said that they are NOT compatible?

    Ink and slides have been abandoned or will be updated apps and work with the iPad models currently available in the future?

    Thanks in advance for all help with this!

    Hey digeratti,.

    Unfortunately, the ink & Slide is not completely compatible with either of these models. I apologize for the frustrating experience, I know that's not what you wanted to hear. Regarding the iPad Pro, the best pen to use would be the pencil of Apple with the sketch in Photoshop or Illustrator to draw. I see that you have indicated that you are experiencing bugs when you just use your fingers. Please let me know which bugs you encounter when you use the key entry instead of a stylus.

    Thank you!

    -Kathleen

  • View call logs, but with contact phone numbers, name, and not only

    I have to be able to show that a list of the call connects to my request.  But for thosenumbers who have a name in the address book, instead of simply to view phone numbers, I have to be able to show the name of the

    number.  (just like the native blackberry app call log done)

    Up to now the following seems to work OK, as long as the amount of data is small:

    • When the main screen is first created, walk the database by calling PIM.getInstance () .openPIMList)
    • Adds a new entry in a hash table for each unique telephone number in the database that points to the name of the contact
    • After that the Hashtable is fully charged, list of call logs
    • As the newspapers call list is displayed, phone numbers search in the hash table, replace with name when a match is found

    But when the Contact database grows, as the order of 500 entries, it takes a lot of time for

    walk from the database to generate the hash table (10 seconds), and while what the application is blocked

    and things seem stuck to the user. This must occur before the first screen is displayed and so after

    the user clicks on the icon and the first screen is being built, the user is thinking ' what's going on..?

    until the screen finally opens.

    Is there an API I can tap in which already provides this mapping for me?  (given a call number journal or by phone,

    Efficiently search the name of the contact with that phone number, if necessary).  That way I wouldn't have to build

    the hash table.

    Or, possibly, some advice on a simple signal of progress to the user while loads of app... This might be simpler than

    trying to tackle the problem with a multi-threaded approach.

    Unfortunately there is no way, I was. I tried to re - implement research of the phone application and came across this as well, as well as some other hidden implementations that are much faster then the public APIs.
    You can try to work with itemsByName, it is also not very fast, according to the number of entries you have.

    Maybe PhoneCallLogID methods can help you?

  • Using Outlook Express 6 with multiple identities.

    Had the hard drive problems.  He has been replaced by Dell warranty.  I have set up outlook express 6 with multiple identities.  I can't go from one to the other identity and return to the original, without having to restart my computer.  Dell has said that some things need to be changed to make it work properly.  They tell me what they were without a heavy load.  I used to use this feature with my old hard drive.  Help me please if you can...  Thanks in advance.

    Hi El KG,

    1. do you receive error messages or error codes?

    You can read the following article and check if it helps:

    OLEXP: "identity switch canceled" when starting Outlook Express

    http://support.Microsoft.com/kb/224463

    Also check the following links:

    OLEXP: How to create and use identities in Outlook Express 5.x and 6.0

    http://support.Microsoft.com/kb/209169

    http://www.Microsoft.com/Windows/IE/community/columns/identity.mspx

    http://social.answers.Microsoft.com/forums/en-us/outlookacct/thread/b53f3c5a-3733-4510-91dB-a23dc6224fc5

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Using switch and case with Radio buttons

    Can I use the case switch with radio buttons?

    What will be the parameter to determine the choice like xfa.event.newText is used for the drop-down list.

    Aditya

    Hi Aditya,

    Select the exclusion group in the hierarchy (you have no script each option button) and select the click event. The switch statement would use the this.rawValue.

    Hope that helps,

    Niall

  • Opening, using Relocator and rest with my project structure

    I use Relocator to move my photos 'managed' Aperture library to be "referenced".  However, now I have to do a project at a time.  I can't get Relocator to work on multiple projects and maintain my project structure.  When I tried it, I put the subfolder 'project' format and the format of the name to "original file name.    It did not work as planned, he put each photo in its own folder.  So now in the format of subfolder 'custom name' and provide the name of the project.  This seems to be the only way to keep my existing structure.   My existing structure is the name of the event and the date, for example the Blizzard Dec 2008.    Any tips or suggestions?  I have pictures of 70 K to move! Going to take some time do this project!  Thanks in advance!

    When I select the pictures of several projects at a time and use the command "file > move...» ', the original images will be relocated in a folder for each project.  I use these presets:

    I tested with opening 3.6 on OS X 10.11.5.  What version of Aperture do you use?

  • Satellite A100: How to use the IrDA port with cell phone?

    I have a laptop with an infrared port that I can use with another computer.
    Now, I have a problem with my laptop at home, A100 series.
    I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
    If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.

    I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
    What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?

    Thank you
    Petri

    Don't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
    What cell phone do you have exactly? Satellite A100-xxx

    IrDA option appears in the control panel?

  • How to manage and work with multiple libraries

    I decided to store my photos in annual libraries - but now I want to create a photo book with photos of two libraries.

    Is there a way of

    (1) create more products of a library?

    (2) otherwise: merge two libraries into one?

    Thank you!

    Does not support photos to merge libraries.

    It would more easily create a library for your book.

    • Export the photos that you want to use in the book of two libraries (select the photos and use file > export > export... versions).  Export photos to a high quality.
    • Import the photos exported in an empty library.  Create your book.
    • Then check in the library with the book project...

    This will have the advantage, that don't accidentally delete you or change the photos you used for your book.

    If you temporarily want to move photos between libraries, you can use the PowerPhotos application.  It allows you to navigate easily several libraries of Photos without having to open them in Photos.

  • Fix for FaceTime and iMessages on El Capitan "an error has occurred during authentication"

    There will be a fix for this error? It's very frustrating, I'm hoping he gets patched as soon as POSSIBLE. I tried everything suggested on the forums of Apple and you have found no solution. It used to work fine until I updated the software on my Macbook.

    You must post a detailed description of what you're trying to do and and what's happening, or nobody can help you solve your problem.  There are millions of users of iMessages on El Capitan, which do not face any questions at all, so the problem is almost certainly on your end.

  • Tokens signature and debug with multiple machines

    There has been various issues and discussions on the backup for signing keys.  This thread says you can save your P12, CSK and DB files and then use them on another computer if your original dev machine never dies.  But I'm confused about how actually to 'install' these files to a new machine (with Flash Builder).  Does anyone have this done successfully?

    I have a second machine where I'm trying to restore my certificates saved (as a test).  I pulled FB on my P12 file, but I don't see anywhere to point to my a CSK or DB files.  The 'power of signature of register with RIM' command looks like that it just creates a new CSK, which broke app update.

    Registration also requires a file of the LSB, and those who are not supposed to be reusable.  The only way I know to get another file CSJ is to complete the shape of the RIM to request a whole new signing key.  But still, I don't want a new key signature...  I also wonder if it would be 'disable' the possibility of signing of my original machine - that is to say, each provider may have only one machine registered for signature at a time?

    A related question: has any who successfully put in place several machines dev (do not sign machines) with chips of work debugging?  FB doesn't let me create a debugging token until it is registered with signing authority, which once again the SJC prescription problem I mentioned above.  And it wont let me point to an existing BAR token I created on a different machine - even if the RIM docs say "you can distribute the debugging tokens you create for developers."

    So, anyone who has ha the chance with this kind of dev multi-machine configurations?  Details on how to do it?

    Thanks in advance!

    -Peter

    The steps to backup and restore your BlackBerry Code signing keys can be found here.

    Backup and restore BlackBerry Code signing keys

    http://supportforums.BlackBerry.com/T5/testing-and-deployment/backup-and-restore-BlackBerry-code-SIG...

    ytpete wrote

    A related question: has any who successfully put in place several machines dev (do not sign machines) with work debugging FB chips won't let me create a token to debug up to what he is registered with signing authority, that has once again the problem of limitation of CSJ I mentioned above.  And it wont let me point to an existing BAR token I created on a different machine - even if the RIM docs say "you can distribute the debugging tokens you create for developers."

    There was a problem with the BlackBerry Tablet SDK where the debugging token button import has been disabled until you have saved the code signing key.  This problem has been fixed in the latest version.  You can now import a token of debugging without keys of your choice.

  • Need for education better to learn how to use the web inspector with smart phone

    I've been trying to run the example of kitchsink webworks app for my Smartphone with web Inspector is not successful.

    Here's what I did.

    1 bbwp kitchsink.zip d

    2. sign the cod to the bin/StandardInstall/kitchsink.cod file

    3. connect to the usb port my 9930.

    3. javaloader my 9930 cod.

    4. disconnect the usb.

    5 startkitchensink app on the device.

    6 see popup 'Web Inspector 192.168.1.100:1338 online'. Click ok and see the app running with the initial page.

    7. on chrome desktop, type "192.168.1.100:1338", I see a hyper link "Web Works Kitchen Sink. I click on the link.

    8 see "192.168.1.100:1338/inspectorBB.html?page=1" on the address, but the screen is blank.

    9. I remember at the Conference, the port number is 1337. I tried "192.168.1.100:1337", but it says "Google Chrome not could not connect to 192.168.1.100:1337.

    I missed the steps detailed here?

    Thank you

    June Jorgensen

    Thanks for the information. I tried it on safari and web Inspector works with the smart phone.

    Do you know if there is plan for the future for the web to rework on Chrome Inspector?

    June

  • Best printer to use, scan, and fax with 10.11.1

    What is the best printer for scan fax with OS 10.11.1 options?

    I have Epson WF3540 and it's really not very good with connections.

    "Best", which means for you?

    Faster, cheaper, smaller, not pretty color, no color, more expensive, Quietest etc.

  • BlackBerry devices with multiple phones of switching software

    I currently use two devices BlackBerry, the Z10 for labor and the Z30 for personal use. I've done a switch of the device of a curve (previous working device) for the Z10 using Blackberry link. I recently bought the Z30 and want to make a switch of the device to my old torch for the Z30. Is it possible to do so using the same link BlackBerry program? Only, I have a PC and want to know if I get a headache trying to do or if there is a better solution.

    Thanks for any help!

    I have not ran into problems because I use two different BlackBerry ID so I had to sign without a job and then sign in to my personal account. Thank you both for your good help.

Maybe you are looking for