Using 'file size <>' in the script of the EEM

Hello

I'm working on a script of EEM that saves newspapers to flash the router and I am trying to find a way to keep the size of the file under a certain limit to prevent filling a single flash file. The problem is that I am not allowed to use the "file size <> "command in a script of EEM. '. Anyway to get around this problem? I know it's because the script is running in Safe-Tcl mode. I can sort the scripts to run in a mode where I can use the "file size" command on a file that I created?

In EEM, flavor of stat file safe-tcl is available.  You should be able to use it to get the size of the file.

Mike

Tags: Cisco Network

Similar Questions

  • Why using the typewriter in acrobat 9 adds less file size that the use of the text of the comment in acrobat 11 tool?

    Why using the typewriter in acrobat 9 adds less file size that the use of the text of the comment in acrobat 11 tool?

    Two employees, one using acrobat 9 and the other uses acrobat 11. The two employees open a secure document one page 105 KB in size. Used using acrobat 9 using the typewriter tool to add comments. Document increases in volume to 137 kb. Second employee using acrobat 11 uses the comment add the text tool (since it is no longer a typewriter tool). This employee has to use tool once and the document immediately increases size of 105 k to 950 + kb. Why is this? What can be done to avoid this?

    As I suspected much earlier, the difference is in the fonts that are used for the text. For the smaller file, text annotation font is Times Roman. that is a policy that is essentially built into Acrobat/Reader. For the larger file, the font is Tahoma, which is not an integrated police force, which ends by happens so the entire police gets embedded in the PDF file. The size of this font on disk file is 681KO on my system (Mac), and it ends up taking more space when they are embedded in the PDF file. The same type of thing happens with form fields and this is done so that all characters in the font are available when the text is changed in a system that may not have the installed font.

    One of the problems is if you try to reduce the size of the file by changing the font that used up one of the built-in ones (Courier, Helvetica, TImes Roman), Acrobat does not remove the now unused of the file font information, if you do not get the reduction in file size that you can imagine, even if the font is no longer presented as being incorporated. I submitted this as a bug some time ago, but it has not been fixed.

  • In DatastoreBrowser vmdk file size not the same as busybox?

    Hello

    I have a few virtual machines in ESXi 4.0 U1, I installed the virtual disks as "thin" then they should grow in size, when the virtual machine is increasingly large.

    If I look at the vmdk files in the DatastoreBrowser of vSphere Client 4 is the case and I have a few files 20 GB for my Windows Server 2008 vmdk files.

    But if I look in the real file from busybox system (I use WinSCP or putty and even with Trilead VMX) then each vmdk-dish has the maximum size of 100 GB (exactly 107 GB). The vmdk file is named hard-plate here and not hard like in the DatastoreBrowser.

    If I download the file DatastoreBrowser vmdk to a Windows machine that I get a vmdk-apartment with great size and not the size specified in DatastoreBrowser.

    Surprisingly all-flat-files vmdk together (seen in WinSCP or VMX) are larger than the disk HARD Physics (500 GB).

    What is c?

    Thank you, franc

    Hello

    as said marcelo, thin discs works on the VMFS partition level. The thin disks does not exist outside of a VMFS partition.

    For example, is run you 'df - kh' you can see the real disk (distributed) of the VMFS partition space. In other words, you can see the total amount of disk space used by the thin disks of the virtual machines.

    Anyway, you turn in the busybox "ls - sh" (instead of 'ls - lh') you will see the real space of the thin virtual disk for a particular virtual machine (vmdk).

    But the problem is that tools such as winscp see the size of the disk space of the thin disks. This tools see the size of the reserved the vmdk file. Then, it copies all the file size of the disk as a thick disk. And of course, the target file system partition that will contain the thin disks, does not support thin disks.

    A thin disk with 3 GB of actual data (distributed) and a 10 GB reserved size is copied on the net by Winscp as a 10 GB drive.

    Best wishes / Saludos.

    Pablo

    Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

    Virtually noob blog

  • The file size exceeds the allowable limit

    I get the error message "the file size exceeds the allowable limit and cannot be saved." When you try to OPEN a document I created, recorded and was able to open before.

    What can I do to get this open file?

    Help, please!

    It turns out that the question was because I tried to open it through my company cloud (NO creativity) and the file was too big to open on a network. Once I saved the file locally, I was able to open it.

  • ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks

    Hi all

    Wen I try to add the new tablespace datafile(32GB) I found the below error. I have space in my drive, why I'm not able to add the new data file to the tablespace?

    ERROR on line 1:
    ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks

    Here's my db_block_size information:


    VALUE OF TYPE NAME
    ------------------------------------ ----------- ------------------------------
    Whole DB_BLOCK_SIZE 8192


    How can I add new datafile with on all issues.


    Kind regards
    RHK

    OERR ora 1144
    01144, 00000, "file size (blocks of %s) exceeds the maximum of %s blocks.
    * Cause: Specified file size is greater than the value of the maximum allowed size.

    ORA-01144: (4194304 blocks) file size exceeds the maximum of 4194303 blocks

    just a differece block, so reduce the size of the file you add and issue new cmd, make 30 GB.

  • FILE cannot BE DELETED, the file size of the file type 'file' "0 bytes"

    I downloaded a music file of myfreemp3.eu, he wasn't .mp3.  He was able to play a couple of times, but now does not open.  Now, I can't move or delete it from the downloads folder, system do not see.  its properties are of TYPE 'file' and SIZE '0 bytes. "  Error message is "unable to find this article. It is no longer in xxx, etc.

    I tried many suggestions to remove it without success.

    I have Vista 2007 service pack 2.  I tried in safe mode, tried to move to another folder, tried to run without windows, search, folder to never display thumbnails, tried Mandrake Move, but it was outdated, orders back cmd has tried to delete. Also tried to delete with disabled explorer.exe.

    Any suggestions?

    http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/file-cannot-be-deleted-file-type-file-file-size-0/60d88d01-CD74-4f47-976e-f5d2cb3dc7a1 >

    Thank you Ganesh and Hetti.  I just finally deleted my ghost file.  I used the safe mode and cmd.

    I went into the directory of downloads in the BACK, the used command DIR / X to find out the name of the file.

    He was ~ 1 at the end of the file name.   I used DEL filename ~ 1 and the file disappeared.  I checked the

    trash and he wasn't there either.  I rebooted the computer and found no trace of the file.

    The controls were as follows,

    CD C:\users\my name\downloads

    dir / x (to find the full file name,)

    del (to remove the file)

    I could probably use alternative command

    del *. *.

    Thank you again and maybe it helps someone else.  I ran the control with the repair disc, but that did not remove the ghost file.  I could also not delete the downloads folder.  Create the same named file with 0 bytes not working anymore.  I tried the latest version of Mandrake then.

  • The file size of the page

    I noticed that my drive 120 GB SSD use much more space for the installation of windows 7 (and also windows 10).  It seems that this is due to the size of the page file created automatically once I upgraded my computer to 32 GB of RAM...

    But it leaves me not a lot of space left on my 120 GB SSD!  Should this system really a 32 GB page file or more?

    But it leaves me not a lot of space left on my 120 GB SSD!  Should this system really a 32 GB page file or more?

    You can decide that for yourself by taking one of these steps, then keeping an eye on the performance of your machine:

    • Move the pagefile to another drive (if you have one).
    • Manually set a smaller size for your swap file, such as 8 GB.
  • "The Archivelog file size" and the question of 'db_recovery_file_dest_size.

    Hello

    According to the literature, DB_RECOVERY_FILE_DEST specifies the default location for the flash recovery area. The flash recovery area contains copies of files of control current multiplexes and remake online of newspapers, but also archived redo logs

    And DB_RECOVERY_FILE_DEST_SIZE specifies (in bytes) of the strict limit on the total space to be used by the target database recovery files created in the flash recovery area.

    Here's the info from my database (10 gr 2, RHEL 64-bit database is in archivelog mode):

    Log_archive_dest_1 = ' LOCATION = + recovery /'

    db_recovery_file_dest = '+ RECOVERY. "

    db_recovery_file_dest_size = 550 GB

    -Size of archivelog files:

    Select

    SUM(BLOCKS * BLOCK_SIZE)/1024/1024/1024 SIZE_GB

    Of

    V$ ARCHIVED_LOG

    -> 672,39 GB

    If I have question used flash recovery area space, it is to be:

    SELECT name

    , ceil (space_limit / 1024 / 1024) SIZE_M

    , ceil (space_used / 1024 / 1024) USED_M

    , decode (nvl (space_used, 0),)

    0, 0

    ceil ((space_used / space_limit) * 100)) PCT_USED

    V $ recovery_file_dest

    ORDER BY name

    NAME SIZE_M USED_M PCT_USED

    + 563200 8 1 RECOVERY

    I'm confused where are the archivelogs saved if not + recovery?

    Total current total size of ARCHIVELOG files if "672.39" but especially the request saying that only 8% of the db_recovery_file_dest was used. So obviously they are either not in + RECOVERY or they are not accounted for.

    I chedk on ASM using asmcmd:

    ASMCMD > cd ARCHIVELOG

    ASMCMD > ls

    2013_09_05 /.

    2013_09_06 /.

    2013_09_09 /.

    2013_09_10 /.

    2013_09_11 /.

    2013_09_12 /.

    ASMCMD >

    Whereas the query on the view V$ ARCHIVED_LOG shows me the file names for the month of August as well.

    I don't know that I am misunderstanding/missing something. I'm lost :-(

    Please advise!

    Thanks in advance!

    You wrong understand archiving at the area of fast recovery works. You have done the fast recovery area to a certain destination and also set up check-in to the same physical location: but Oracle doesn't know that they are in the same place. You must explicitly set:

    ALTER system set log_archive_dest_1 is 'location = USE_DB_RECOVERY_FILE_DEST';.

    and then Oracle will understand and follow the space in the paper archive used against the db_recovery_file_dest_size.

    --

    John Watson

    Oracle Certified Master s/n

  • Error message incorrect file size when the BIOS update on Satellite M100

    When you try to install the BIOS update I get the error message: incorrect size of the ROM file. What can I do? Thank you.

    Hello

    Today is your lucky day dude. Seems I found a solution :D
    Pelase take a look at this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19974&MessageID=73284

    The user JayJay has provided a link to the Toshiba document that helps to clear this issue.

    It is the original document;
    http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

    Please try it and post if it was the key or not. Good luck

  • How to display the file size and the number of files in the folder

    I have a laptop and a desktop at home. When I open a folder on my laptop, my laptop display size (on the bottom right corner) and the number of objects (at the corner of bootom left hand) of this file the bottom of the window.  But I don't see this information on my desk. I tried to play with the Option - view folders... but always in vain.  Can I know what is the correct way of doing things?

    Hello cscs77, welcome.

    The option that you are referring to I think would be the bar of "Status". This gives a test:

    1. open 'My Documents '.
    2. at the top, click on view > status bar

    That should solve your problem. Let us know,

    Thank you! Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Why I get more LARGE file size if the resolution is SMALLER?

    I had a video that I got from someone in 1080 p (mp4) and it was 7MB

    Then I changed it to 480 p (mp4) and then it was 9MB

    How do I make the file size my most small?

    It is the only way to reduce the rate of export data.

    Data rate determines the quality!

    9 MB for 20 seconds is already very low.

  • Double file size, from the NAVE

    Got them all,

    Convert NEF file to DNG files in this size of process files are double Nikon?

    Is this normal? What is the reason?

    Thank you

    OP simply refers to the "original" poster I was able to extract that the NAVE of the DNG file files and then run it through the DNG Converter again. Without the built-in NEF file, the size of the DNG file was 8,66 MB. Is there a change Preferences button to the bottom of the screen of the DNG Converter. You need to go into the preferences and do not forget to deselect the option.

  • Exported images are of large file size, but the small screen

    LR Example.JPGLR Example 2.JPG

    Something has changed in my export settings, and I can't understand it.  If I insert a file into any application (i.e. PowerPoint, Word, Publisher) that I exported to LR5.7 before last week, the end images (image of female left) look if I export a new image, the file size is large (10 MB), but when I insert into any application, the image itself is extremely low (male right image). I know that's not the image itself, because I've tried it with images that have worked in the past which has worked and now have the same issue. If I try with resize in the image program itself just gets very distorted and pixelated. Any thoughts on what is wrong or what I screwed. I've also included a picture of my LR export window

    Maybe Word etc read the 5000 pixels per inch setting in the exported file and timing of small file in the application.  Change to 200 or something and see what happens.  This has not test so it is maybe not the right direction to solve the problem.

  • Get the file size of the report on PowerCLI server file?

    Hi all:

    I'm trying to find out if there is a way to list the size of a local file on the server powercli.  The background is that I have a script that runs every day and emails on the report of what it finds during verification.  What I'm trying to update the script to do is only to send the report if the audit revealed actually do anything; and not a file attachment is empty...

    Thanks in advance for any help you can provide and please let me know if you need more information.

    Thank you!

    Jade

    Hi Jade,.

    You can do the following to check the size of a file named vmware.log:

    If ((Get-ChildItem vmware.log).) Length - gt 0) (# email logfile)

    Best regards, Robert

  • Explosion of file size when the VM between moving/copying data store

    I just got my first setting dedicated the SAN unit in my ESXi infrastructure.

    I have set up and now my ESXi server got this new available data store.

    Initially, virtual machines when running on the local HDD SAS.

    I'm trying to move virtual machines between the 'old' DS to the new using the DS browser.

    When copy/moving of the unit of SAN iSCSI VMs to my HARD drive, I'm done with a HUGE vmdk file.

    Let's say that my original files are approximately 35 GB, when the process of copy/move this virtual machine to the no new DS, I get 250GB which is the size configured my virtual HARD disk...

    I'm I missing something here (obviously)?

    Any help/info would be greatly appreciated.

    Concerning

    Take a look at http://communities.vmware.com/message/1499444

    André

Maybe you are looking for

  • Re: Equium A200-1V0 - Tempro WARNING: disk partition was more than 75% of the full

    I received a warning from Tempro that a hard drive partition was over 75% full.I did a cleaning upward and the disks are nowVista (c :)) 15.9 GB free of 55.6 GBData (e :)) 47.4 GB without 54.6 en)WinRe (d :)) 1.25 GB 146 GB free. My question is: can

  • Its icon on the taskbar is not displayed

    Hello! Just today my laptop does not show an icon on the taskbar sound as it usually does. If you see in the right corner it usually an icon of the right? but mine is gone?Can you help me how to get it back? Thank you

  • Please bring back the emoticon (finger).

    Skype had an emoticon (finger) for a long time, then Microsoft it deleted for some strange reason. Now that Windows 10 will add so notoriously an emoji middle finger, I think it would be hipocritical do not regain the emoticon (finger) Skype too, whi

  • HP Pavilion 6730 s: chipset for 6730 s

    Hi all is there a chipset driver, that I can get for my HP 6730 s Pavilion Windows 7 as I find. Thank you

  • 57(d) updates__ installation error code

    I'm new to this site, my kids are a little more having to assist me with "small it issues" if I'm here! Can someone help with this error message please?