Using multiple computers on the network

Similar Questions

• I use Thunderbird on multiple computers to the same gmail account but I have a laptop with little memory, so I need this laptop only to download a few files

  I use Thunderbird on multiple computers to the same gmail account. I have a small laptop with very little memory and it runs out of disk space when it downloads all my folders. I would only download some of my file on the laptop, but keep all the folder on my other computers because they do not have problems with disk space. When I unsubscribe records in 'manage folder subscriptions' then he cancels his subscription on all my computers, not just the laptop. When I go to 'Properties' on the folder and sets 'retention individual police' these settings are not applied at all. What can I do?

  All of the messages in each folder will appear in your message list. But this does not mean all the bodies of messages are downloaded, if you have properly configured the parameters of the disk. If what I described above stuck in your settings then Message body should be downloaded only 'on demand' when you click on each message.

  To confirm this install the addon glodaquilla, which has a column "on the disk" that indicates if a message is on the disk. If you want, after you have installed the addon set Thunderbird to work offline, so it does not download message body when you click in the list of messages.

• Windows XP sees Win 7 computers on the network, but not Windows XP-based computers (7 can see 7, but 7 can't see XP and XP cannont see XP)

  We just installed a new Netgear Prosafe 16 port switch.  We use a wired Linksys router.

  With 10 computers on the network, XP can't see XP or 7.  And sees only 7 other 7 computers.

  We are able to ping to all computers.  All computers have access to the Internet.

  Network neighborhood shows computers only 7 to 7.  XP doesn't show anything.

  Error message:

  "The Working Group is not accessible.  Migh Tnot you are allowed to use this network resource.  Contact the administrator of this server to find out if you have access permissions. »

  "The network path is not found."

  Thank you!

  Hello

  -Are you connected to a domain network or a home network?

  Please follow the steps below and we update with the results.

  Method 1: Error Message When you try to access a network Windows XP computer: "you might not have permission to use this network resource".

  Please follow the steps described in the following article and check if it helps.

  http://support.Microsoft.com/kb/913628

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Method 2: Error Message When you try to access a network share on a Windows XP-based computer: "workgroup is not accessible.

  http://support.Microsoft.com/kb/915107

  For more information, see the articles:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Let us know if it helps!

• My laptop that is running windows xp does not recognize the computers on the network running windows 7. Any advice?

  I recently created my home network again.  It consists of a laptop running windows 7 Professional 64 b, b Office windows 7 Professional 32 running and a netbook under windows xp home.  Two computers running windows 7 recognize each other and share correctly, but the netbook will not recognize the other computers on the network at all.  They can see it, but then say they can't access them when you are trying to access.  They are all on the same workgroup.  Computers that run windows 7 discovered the network, file and printer sharing, and public folder sharing all lit.  Password sharing is disabled and windows manages the homegroup connections.  Any advice would be appreciated, I need to use computer dvd players 7 on the network to install some things on the netbook.

  Hi mahmorc,

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Update the latest drivers for the network card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Cannot see other computers on the network

  Am on XP SP3.
  When I go to network connections,
  Right-click on local area network
  Click Properties under the general tab,
  Click on install and click Service
  .. all I see is a list for a McAfee driver but nothing for Microsoft. I removed my computer some time ago with McAfee & he must have created problems that I can't see other computers on the network. Is there a Microsoft driver, I need to install and which will help to solve the problem of not seeing other computers on the network.

  On the general tab of the properties of your network connection to the LAN card, you should see a box under the heading "this connection uses the following items."  Most Windows XP configurations for home use have 4 entries in this box: Client for Microsoft Networks, QoS Packet Scheduler, file sharing and printers for Microsoft Networks, and Internet (TCP/IP) Protocol.

  If you don't have these, you need to install, even if you really need not the Scheduler of QoS packages.

  You seem to have got almost to the right place, but be aware that when you click on the button 'Install' in the box, you are given 3 choices: customer, Service and Protocol.  The "Client for Microsoft networks" is obviously a "customer." 'Internet (TCP/IP) Protocol' is a 'Protocol' and the other two are "Services".

  What elements you have installed?

• WRT160N - can't see other computers on the network

  I installed a new WRT160N and now I can't see other computers on my local network, but I can access the internet on each of them.

  Y at - it a setting that I need to change or what I need to use static IP instead of DHCP addresses?

  If you cannot ping the other computers on the network, then check your firewall settings or any other security software blocking the connection.

• WRT16N connection between the computers on the network

  Recently installed router WRT160N wireless and set up a network involving the computer desktop and computer laptop so both can use internet.  Computers and Internet service work have been checked for the operation of the network.  Two computers use Windows VISTA.  The network and sharing Center and Anti Virus Software of the computer also check that computers are interconnected and are working properly.  However, when I try to ping from one computer to another, I get messages that I can't access the other computer, the network path is not found.  Discvery network, file sharing, file sharing and printer sharing were all lit.  I tried several methods to connect, but have not been able to do.  Can someone give me some advice?

  I went back and changed the status of trust for my computers, and which seems to have fixed the problem.  Thanks for the help.

• OfficeJet Pro 8620 causing conflict of IP address with computers on the network?

  Hi all, just got all set up and have had some good results so far. However, it seems that I have a conflict of IP address with computers on the network in my House today. The only thing different is the new network printer.

  Any ideas?

  Windows 7 64-bit, Firefox, Cisco router wireless

  MacBook Pro, iOS7, Safari/Firefox, same router

  Fast and simple.  Set your router for DHCP addresses from 192.168.1.100 by 192.168.1.150.  Set the printer to a static IP of 192.168.1.10.  Fact.   Your router may be 192.168.0.x 192.168.0.x can be used instead of the above.

• I can't use windows Explorer or the network drive mapping to access my NAS drive more.

  original title: strange NAS problem

  Hi everyone I can't seem to fix this strange problem.

  I can't use windows Explorer or the network drive mapping to access my NAS drive more.
  I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

  The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

  Here is some info.

  I can access to other computers and devices on my network.

  I can access the internet.
  I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
  I PING the NAS drive.
  The NAS drive will do the same if connected via cable or by wireless.

  UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

  Help, please.

  Thanks for the help, but I fixed my problem

  Here's what I did in case anyone wants to know.

  I went into Device Manager and went to network adapters.
  I then expanded this section and under view changed to display hidden items.
  Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
  Then click scan for new hardware.
  And... everything works again! YAY!

• Machine of Windows 7 cannot see itself or other computers on the network.

  I work with a volunteer organization, is attempting to add a new computer to their network. Add the new computer is a laptop running Windows 7 Professional (32-bit, 6.1 build 7601).

  It is one of the three computers that connect via a wireless network, with the remaining three computers connected by Ethernet.
  One of the laptop is running Windows 7 Home Premium (64 - bit, 6.1 build 7601) and the laptop rest and three desktop computers running XP Professional (5.1, build 2600).
  The laptop running Home Premium has no problem with connectivity. He can see himself and all the computers on the network (with the exception of the new Windows 7 Professional machine). The XP machines can all be seen and also the machine Windows 7 Home Premium.
  The Windows 7 Professional machine, however, cannot see itself, or one of the machines running on XP. It may, for some reason, see the Windows 7 Home Premium machine.
  I can ping each computer on the network from him and he can ping other computers. I can even connect using his IP address and access the folders and files shared like this, but nothing I have seems to change him will appear.
  I tried to disable the Windows Firewall and Microsoft Security Essentials, neither of which has an effect any. The computers are all in the same workgroup and network machines Win 7 is set to work on both.
  I can't understand why this new computer should have these problems, I'm not a professional so there is probably something basic, I missed, but if anyone has any ideas I would be much obliged.
  Thank you very much.

  Hello

  The question you have posted is related to Windows 7 connected to an organization and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Thank you.

• Client VPN prevents internet access from other computers on the network

  Hello.

  I run Client ver 4.6.03.0021 from an office on a network of 11 computers via a hub 16-port. Internet access is through an ICS gateway to the cable modem. Once I changed the modem cable to test a backup and then switched back to the original modem. After this, only computers that have the VPN Client (running or not) could access the internet. Computers that have no customer VPN can access only certain sites. Commonly viewed sites would say "site found. Waiting for answer", but the answer would never come and IE 6.1 cling. When I would try ping sites, it would fail. However, some sites such as Google.com would work.

  On one of the computers, on a whim of head, I installed the VPN Client but have not set up a connection. Now, this computer will connect to any website I want.

  Is there a fix easier to get access to other computers on the network without installing the VPN Client on each of them?

  Thank you

  H. Adams

  Hello

  Looks like you are running in MTU problem. The reason I say it is, automatically reduces the MTU value to 1300 VPN client during the installation for the whole system. That is to say all the client computer installed VPN that have MTU from 1300.

  Try to cut down the MTU of other systems that have no VPN client installed to 1300. If it's a Windows system, you can use Dr. TCP (free).

  Vikas

• Win 7 computer cannot see the computers on the network

  We have 3 computers on our network. A desktop computer running a laptop running Win 7 x 64, an office equipped with Win Vista and Win XP. All 3 are connected to the same workgroup and are properly connected to the internet. The two workstations can see and the laptop on the network and can move the files to the laptop, but the laptop cannot see other computers on the network. Whenever I try to open the network to move files to another computer, the icon just mouse sits and turns and the page remains blank. I thought that maybe he just needs time to see everything, left like that for hours without success. I went through all the troubleshooting steps in the win7 with nothing working Help Center. I don't understand why, if all the computers are on the same network, they can see me, but I don't see them. I am obviously connected properly so they can move the files to my computer. It may be unrelated, but I also can't update windows, keep getting error 80246008 when I try to run the update. Any suggestions on what I can do to fix this?

  Hello

  You can try the following steps and check whether the problem is resolved.

  Step 1:

  Networking of computers running different versions of Windows

   http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

   

  Step 2: Now, you will need to follow the links provided below to check if you are able to connect to the home network.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

   

  Step 3: Now, you will need to visit the link that will help you solve network problems.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Now, you can follow the steps in the link below

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Windows Update error 80246008

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  It will be useful.

• I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that. In the ideal, of group policy or some ways to disable all the computers on the network

  I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that.
  In the ideal, of group policy or some ways to disable all the computers on the network

  Some info here (Group Policy)-> http://www.unidesk.com/blog/how-disable-firefox-auto-updates
  
  Above article refers to-> http://sourceforge.net/projects/firefoxadm/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't.

  Configure the connection without my Windows XP CD?

  
  

  I'm trying to connect 2 through a router (network) computers. The Network Setup Wizard tells me to insert my Windows XP CD, but I can't. Is there something that I can get online? What should I do?

  Hi Humphrey2,

  I suggest you arrange for an installation CD of Windows XP which may be necessary to copy the files to configure the network connection.

  You can follow these links and check if the problem persists:

  In Windows network connection issues

  How to troubleshoot a network home in Windows XP?

  
  Reference: Overview of the Network Setup Wizard

  Hope the helps of information.

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd