Using the Eye - Fi ProX2 card with 1Ds Mk III

Similar Questions

• How to use the smartswipe on mozilla card reader

  I used the smartswipe long on IE with no problems card reader, then I started having windows pop up on the screen when you use the card to update reader browser DESPITE the fact that I got IE9 (latest) already loaded. I sent an email asking why their site could not detect this at smartswipe site and said by them to reload IE9 or load Mozilla. Reloading of IE9 was not good - I kept getting error message. I used Mozilla for awhile until my HD failed and was replaced. Now your website says disabled smartswipe and used to work with Mozilla 20.1 can use a version earlier than Mozilla or not? Please help me on this issue. Thank you.

  Hey,.

  the last executable is Firefox 19 and can be downloaded here:
  http://SmartSwipe.ca/downloads/

  I'm not sure if it is also possible to run it on 20 of Firefox, but you can try it. If this does not work, you can demote [1] or wait Smartswipe publishes an updated version of the application.

  [1] install an older version of Firefox

• I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8.

  I have a psc 1350 HP which cannot me use the scanner, due to incompatibility with Internet Explorer 8.  When I use their "fix", it turns out that my screen blue and green. Aid others?

  Your support for the product is unfortunately - the manufacturer of the product.

  Suppose you tried everything here:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=306884&prodTypeId=18972&ObjectID=c00802504

• I installed Vista in a Virtualbox VM and the product key does not work, how to fix this? I use the same product key supplied with the computer originally.

  I bought a Dell Precision T3400 of Dell Financial Services and it came with Vista Business installed.  I installed a new hard drive and installed Vista in a Virtualbox VM by using the recovery disk that came with the computer, and the product key does not work for activation.  I get a message that says I need to activate Windows, but he says that the product key is not valid.  How can I fix it?

  Thank you

  If you have reinstalled the OEM of Vista Business copy on the new hard drive, as Bill says you can't also use it in a virtual machine.

  You can only reuse your OEM of Vista professional copy if it is no longer used on the computer. Do you have what operating system installed on the new hard drive? It was an upgrade copy or complete the license?

  If you used a license to upgrade to another edition of Windows to replace your copy of company then Vista Business license is still in use (for upgrade) and you cannot reuse it in your virtual machine.

  However if you replaced Vista business with a copy of the full license of another edition then you are able to use the OEM copy in a virtual machine, but only on the same computer. You must use the product key from COA to the label on the computer. The product key is put in the copy OEM cannot find the SLIC table on the host motherboard. You must use the phone activation from within the virtual machine. Click on start in Vista Business and typing "slui 4. Do not meet the audio guests until it asks you if you want to speak to an agent. Explain that you have completely replaced the OEM copy with a copy of the full license of the new windows and now want to use the OEM copy in a virtual machine on the same computer. Agent will then give you the activation string. Remember that the virtual machine is not transferable to any other computer.

  This information is offered by Darin Smith (MSFT) and the team of Windows licenses, November 18, 2011.

• Can I use the library of creative cloud with Illustrator CS5

  Can I use the library of creative cloud with Illustrator CS5

  Hi Ilys Ravel,

  No, CC libraries function is available in version CC 20141 sur-quartiers.

  Sanjay...

• upggrading a windows xp pro service pack 3 with the new card mother and pure install using the original disk of xp with service pack 2

  I have an auto build Windows XP pro with service pack 3 that is upwards and I feel the need to upgrade to a new motherboard and processor causes memory and I know that when I do a clean install with my original disk, I lose service pack 3 that will then lose me the Microsoft support is anyway that I can backup service pack 3 for use with what will be considered a brand new computer

  See you soon

  The site is authentic.  You have two options when you do your relocation:

  Method 1

  1. Download SP3 form the Microsoft site and burn it to a cd or copy it to a flash drive.
  2. Reinstall Windows with your original Windows XP CD.
  3. Use the copy of SP3 that you burned on the CD or copied to the flash drive and update the machine to SP3.  Note that if you have an original CD of 'gold' of Windows XP without service pack that you install SP1a or SP2 before you install SP3, SP2 is available here , download and save it with SP3 before making your relocation.

  Method 2

  1. Download SP3 from the Microsoft site and it wake to your Windows XP CD.
  2. Install Windows XP with your slipstreamed CD and your installation will be in SP3, when installation is complete you will not need to install service packs, you'll just have to do some other updates that have been released after SP3.

  The http://lifehacker.com/386526/slipstream-service-pack-3-into-your-windows-xp-installation-cd is legitimate, it only gives you instructions on how to create and burn a CD of SP3 slipstreamed Windows XP.  If this seems too daunting then use method 1 to install Windows.

  Both methods are very good but method 2 allows a nicer cleaner installation, everything is installed to SP3 level and there are no remnants of previous service packs.  While creating the slipstreamed CD may appear to be a time consuming task, in the end, it will be a time saver and afterwards if you ever have problems with the installation of Windows you may need this cd SP3 slipstreamed to all repairs on the installation.  You can create the SP3 cd now and do it ready and at hand for future needs.

  John

• Portege 3480CT: cannot use the 16-bit PCMCIA card

  Hello

  I had a problem with a PCMCIA card (new media wave jammer, 16-bit) on a 3480 with Win98 & XP.
  The card appears as an unknown device in the "remove hardware" - tool.

  In Device Manager it does not at all appear and Windows did not ask for the driver.

  It looks like a card damaged, but still, this card works fine in another laptop!
  The problem could be related to different areas of memory used by the Cardservice.

  The Cardservice of the 3480 ct seems not be configurable.

  What can I do?
  Thank you

  Hello

  The PCMCIA card doesn't need a driver!
  To my knowledge, you must check the settings in the BIOS!

  On the second page of the BIOS, you should try to change the configuration of device for all devices and in the section of PC card, you must set the controller to Cardbus/16-bit mode

  then save the BIOS settings.

  Maybe it helps

• How to use the kit sensor Bioinstrumentation Vernier with NI ELVIS II and LABview on a CPU?

  So I have the NI ELVIS II + and a box full of Bioinstrumentation sensor, including Kit sensors: Analog Proto board connector (s), pressure sensor, hand dynamometer, hand grip monitor heart rate, EKG sensors, Surface temperature probe, among others.

  I can't seem to get all the sensor data to my PC that I use, I'm not too familiar with electrical circuits but I followed the manual directions for the specific sensor but it seems as if it doesn't have a difference. I'm with copper son crochet and so that they know the places appropriate (according to the manual) but nothing.

  Am I missing something? I have also the is open regardless of the specific LABview laboratory (Surface Temp lab for example), but when I press run it is as the sensors are not recognized or even be recognized. The sensors are plugged into the connectors on the analog Proto Board also. What I am doing wrong, and how can I get these sensors to work?

  Any help will be greatly appreciated.

  From what I see, it looks like a typing mistake in the manual.

  Try to connect GND AI0 - and NOT ALWAYS.

  It should look like this.

  Connect the following pins for wire connector:

  1. AI0 + SIG1 analog connector Proto Board

  2. + 5V power supply DC to 5V analog Proto card connector

  3. Power supply to the GROUND to GND of the analog Proto board connector

  4. AI0 - GND of the analog connector Proto Board

• I'm learning how to use the Eye Crysral software - I have video but no sound?

  I'm not recording any sound when I use the Crystal eye camera - can't find all instructions in the software of the laptop?

  When you have launched the app for the first time, you should have received an option to allow or block the use of the MIC and the webcam with this software. If you have accepted, then it should work. However, it seems that this is not the case, then I recommend to check your Mic settings.

  Try some of the suggested in the following troubleshooting steps:

  http://Acer.custhelp.com/app/answers/detail/A_ID/34585

• Capture TV programs via the cable using the cable box and card Hauppauge

  I was doing fine record TV unencripted signal until comcast sent me a box of small encriptación. I have no problem with the help of the box to see the TV programs on a TV, but I can't get the Huappauge card to recognize the signal from the comcast box. I recognize the signal (without going through the box) an antenna that I decked out, but I can't work with the IR signal from the box that changes channels.  I have the cable extension IR remote with comcast box and also have an extension remote IR provided with the computer/hauppauge card.  It doesn't seem to be an outlet on the map, but there are three locations on the computer that are identified as IR Device Manager lists a Hauppauge Comsumer s infrared receiver and an infrared transceiver Microsoft e-Home installed without any indication of error.

  How can I get all those guys to play as a team, so I can schedule recording of TV programs again?

  CheckSix

  Photoray002;

  The Hauppauge WinTV HVR-1290 sends finally channel change commands TV Comcast decoder box and it is now possible to program the recorder.  I think that the main problems were a failure remote control Hauppauge and a very low external receiver.  It could also have been a few taken IR on the computer that could have internal corrosion of three years of inactivity.

  I found two sites that have helped significantly:

  http://support.HP.com/us-en/document/c01744910

  This site showed that the jury of IR extension on the back of the computer could be one of two different configurations - with and without electronics on the expansion card.  He had to open the case to determine where the design has been installed.  Mine was no electronics, but the indications I had followed guess an electronic sign.

  http://www.Hauppauge.com/site/support/support_faq_irblaster.html

  This site goes into detail about the implementation of the system using a set-top box.  I couldn't always installation to work because the statement strongly relied on the Hauppauge remote control.  But I noticed in the comments to the screen, another way to use the keyboard rather than the Hauppauge remote control.  Better easier to identify the box system is the first option.  The program will redirect you to point the remote very close to Comcast (touch) to the external IR receiver and press a particular key.  If the receiver receives the signal, it will be a very small red light flashes in the receiver. You may need to move the remote to the receiver to get this light. Once the box is identified the process of implementation of the signal is simple although there will be a lot of channels identified.  You can uncheck the channels that you don't want or you can deselect all channels and the select only the channels you want.

  Thank you for your help. He made me go in the right direction.

  CheckSix

• Is there a way to change the settings of video card with PowerShell?

  Hello

  I am updating multiple virtual machines to the new tools and the hardware upgrade to v7.  Several have 4 MB video RAM, and I want to change this to Auto-Detect.  I use Set-NetworkAdapter change a vmxnet3 adapter and hoped there was a cmdlet "Set-VideoAdapter' to change the video, but that does not exist.  Is there another way to set the video card with powershell?

  See change VM memory video Alan.

• Can I use the Windows Vista I had with my Toshiba laptop on virtual machine?

  Hey all

  I have changed Microsoft for Macintosh, but installed on a virtual machine (oracle vm virtual machine) my Windows Vista I got with my Toshiba Satellite A350D Notebook previous. I installed Vista with the recovery disk. Now he asks me the Windows Vista product key. The sticker on the back of my laptop is more readable. I run the Belarc Advisor to get the product key in this way. But right now, he said: "it's the product key installed at the factory by the manufacturer rather than yours. You can change this to your product key here for Windows http://go.microsoft.com/fwlink/?LinkId=45668"

  My question: am I not allowed to use windows vista legally, I had with my computer toshiba laptop on other devices? I won't use the Thoshiba laptop. Do I have to delete the record from the Thoshiba laptop? Where can I get a new product key?

  Maybe someone can help me here. Thank you in advance for taking your time to read this.

  Betty

  Recovery disk or recovery image is designed for some cell phone only and is not a kind of universal image that can be used on other devices. It comes with the laptop.

  You can use the Microsoft Windows disk with valid license on each device. Recovery image is not only BONES. This is the package that contains the drivers and tools specific to Toshiba and utilities.
  As you also know recovery image when you install it on your laptop must be turned on not so the license code downstairs just proves you have purchased a valid license with your laptop.
  > Should I remove the record of the Toshiba laptop?
  Not why do this?
  > Where can I get a new product key?
  You cannot get it because you need when you use the recovery image on your Satellite A300D. I think even you will hear of Toshiba.

• Tecra M5: How to use the FN + F2 fast locking with external keyboard keys?

  When to use a docking station and the keyboard of the UBS, the function key ("Fn + F2") on my tecra M5 as will not work. The USB keyboard has a Fn key, but when you press on with F2 nothing happens. Can I lock the screen another way?

  Usually, by default the FN keys work only on the internal keyboard.
  If you want to use the function key FN keyboard USB external, you must first activate this function FN.
  This function, you can enable in the Toshiba HWSetup located under the control panel.
  Here, you will need to select the keyboard tab and assign a function to the FN key on the external keyboard Fn key window.

  Hope this works

• use the apple store gift card purchase app

  Hello

  One of my friends sent me an apple store gift certificate to buy a game for my son. How to do?

  It seems that the apple store gift card is only to buy apple products. He should have send me iTunes gift card.

  In addition, iTunes and app store are separate apps on my mac os x yosemite. So it seems logical that iTunes gift card are buy iTunes points and can't buy app store points.

  If I can't use it then I send it to him so he can be refunded?

  Thank you.

  Mac App Store: Frequently asked Questions (FAQ) - https://support.apple.com/HT202152

  Can I use an Apple Store Gift card or iTunes Gift Card to make purchases on the Mac App Store?

  ITunes gift cards can be used to make purchases from the Mac App Store. Apple Store Gift cards are redeemable in Apple stores and may not be used on the Mac App Store.

  I don't know if you can go to an Apple Store and buy an iTunes card it.  Note also despite the confusing Apple policy of any appeal 'Apps' now, what you are running on an iPod and you run on a computer are not the same (for now at least).

• Could someone use the iMac as a monitor with a new MacBook Pro?

  We bought a new 13 "MacBook Pro and still have our old iMac monitor. It would be great to use the large size of the old, almost dead iMac screen. Does anyone have this done successfully?

  Thank you!

  Only some models of iMac (latest) have the ability to be used as a screen for another Mac.  This function is called target Display Mode.  This document contains more information, including the models of iMac with the ability to target Display Mode.

  Use your iMac as a display with the target - Apple Support Display Mode