Using the option of turning off Sleep

Similar Questions

• Want to fire green W701 fingerprint reader when the laptop is turned off

  I realize the amount of electricity it uses is trivial, but unfortunately the accusation that carries the battery isn't much else. For the most part it's just because I don't have a use for the fingerprint reader. I completely uninstalled the software from the control panel. I thought that would get the light, but the "light on" survived the uninstaller not so complete.

  I hope that there is a way to do it in the bios. If necessary I could re-download the software of fingerprint and do a from there, if possible.

  It is possible to do anyway, please let me know. It's a minor thing, but I'm pretty annoyed that I'd make a sort.

  When you turn on the computer (off-state), press F1 when you see the Lenovo logo (until the BONES start to load). "I think that you should find the fingerprints under security settings). It shouldn't be too hard to find.

  Edit: Looks like that I don't remember it correctly. In the BIOS, you have the option to completely disable the fingerprint reader, but you do not have the option to turn off the green light only without disabling the fingerprint reader. If you want to disable the fingerprint reader completely turn off the computer, then turn on and press F1 when you see the Thinkpad logo (prior to the OS). When you enter BIOS click protection on the menu, and then select access to the Port of IO. In this list, you should have the ability to disable the fingerprint reader that I am sure that will also disable the go-ahead since the sensor is no longer in use. Press F10 to save and exit from BIOS.

  To remove the green light only, or disable the option to turn on your computer by sliding the finger without completely disabling the fingerprint reader, in my view, you must reinstall the fingerprint reader software. Then, you must open the application after installation and type your password or by the finger scan enter enter parameters. Then click the settings button in the toolbar and you should have several tabs where you can turn off the green light or disable the use of fingerprint predesktop authentication.

  -gan

• iMessage does not work for me. I have no text to send or receive texts as an alternative. I am able to use the Internet to navigate / social media but iMessage completely ceased to operate. I tried the usual phone turn off / on, reboot, etc.

  iMessage does not work for me. I have no text to send or receive texts as an alternative. I am able to use the Internet to navigate / social media but iMessage completely ceased to operate. I tried the usual phone turn off / on, reboot, etc. and still nothing. What can I do?

  What methods have tired to get it activated?

  You can disconnect from the iMessage

  Disconnect from the iCloud

  Reboot your phone

  Reconnect

  Wait iMessage activate

  Do you have a viable data plan?

• Gigaframe L81 - after 2-3 seconds, the LCD screen turns off

  Hello!

  I think, I missconfigurated my camera... I put the automatic light (auto light) options, then the LCD is turned off. OK, its light of day here, but how can she Cook?

  And - perhaps because of the thing said? -its LCD screen turns off every time, when I push the power on button. I'm tired of using the reset switch, but she has - at least, in the LCD - no effect.

  Device is reset, then lights up the screen, I see him starting, I can touch control "buttons" on the right side (I can see the blue lights), but after only 2-3 seconds, the LCD display turns off again.

  Although I can do anything on my camera - attach PC files, copy or dele (ordered from Windows) etc. I just don't see anything in the LCD screen.

  What's wrong?

  If it still does not work after resetting it, then it may be a hardware problem.

  I think that you will need for repair/replacement.

• "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

  I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: disabled

  10/04/2013-17:44:54
  MBAM-log-2013-04-10 (17-44-54) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 271656
  Time elapsed: 43 minute (s), 42 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

  (end)

  Malwarebytes Anti-Malware (Trial) 1.75.0.1300
  www.Malwarebytes.org

  Database version: v2013.04.10.14

  Windows XP Service Pack 3 x 86 NTFS
  Internet Explorer 8.0.6001.18702
  Ziadie Berry: BERRY-LAPTOP [Director]

  Protection: enabled

  10/04/2013 23:43:49
  MBAM-log-2013-04-10 (23-43-49) .txt

  Scan type: quick scan
  Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
  Analyze the options disabled: P2P
  Objects scanned: 269636
  Elapsed time: 49 minute (s), 41 second (s)

  The process of memory detected: 0
  (No malicious items detected)

  Modules of memory detected: 0
  (No malicious items detected)

  The registry keys detected: 0
  (No malicious items detected)

  The registry values detected: 0
  (No malicious items detected)

  Registry data items detected: 0
  (No malicious items detected)

  Files detected: 0
  (No malicious items detected)

  Files detected: 1
  C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

  (end)

  I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

  Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
  WinSock status

  attmpting error information to validate the Winsock base providers: 2
  error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
  user redirection of information in support of the appeal

  Diagnosis of network adapter
  Network location detection

  Info to help home Internet connection
  Identification of network adapter

  Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
  Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
  Info both Ethernet connections and wireless available, ask the user for selection
  required user input action: select network connection
  Info Wireless connection selected
  State of the network adapter

  Info network connection status: connected

  HTTP, HTTPS, FTP Diagnostic
  HTTP, HTTPS, FTP connectivity

  WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
  warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
  WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
  WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  error could not make an HTTP connection.
  error could not make an HTTPS connection.
  error could not make an FTP connection.
   
  Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

  I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

  Hello

  Follow these methods.

  Method 1.

  Start the computer in safe mode with network and run a full scan of computer viruses.

  To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2.

  If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

  Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

  What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

  How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
  Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• the request to turn off this virtual machine failed because the corresponding vmware tools script didn't run successfully

  using vmware fusion 2.0.5

  the request to turn off this virtual machine failed because the corresponding vmware tools script didn't run successfully

  now vmware cant off power

  is vmware tools script to run when windows is running

  If I power off (mac - force quit) now... what happens

  VMware Fusion 2.x...

  VMware Fusion (menu bar) > help > VMware Fusion help > running VMware Fusion and Virtual Machines > Shutting Down a virtual machine operating system

  VMware Fusion (menu bar) > help > VMware Fusion help > running VMware Fusion and Virtual Machines > Options for VMware Fusion food orders

  VMware Fusion (menu bar) > help > VMware Fusion help > running VMware Fusion and Virtual Machines > orders of switching power supply from the default Options

  ==========

  Note: It's like pulling the plug of the wall on a physical computer. Whatever this is not saved will be lost and there is always the possibility of corrupting the file system where preforming a hard stop! (Even if you have no choice but to do.)

  VMware Fusion menu bar > VM > press the option key and select Power Off

  By pressing the keys alt/option "Shutdown called" changes to "Power Off".

  Note: It also changes orders of "Suspend comments" and "Restart Guest' too.

  Or if this does not work then...

  On the library Virtual Machine ctrl - click on the target of the Virtual Machine and select Show in Finder and delete the .vmss file, the ctrl + click the target package of Virtual Machine, and then after the merger closed. Note: All that was not justified for the suspended state will be lost by deleting the .vmss file. Note: However: you have no other choice if the Virtual Machine does not suspend/resume/stop/start correctly.

• NB510: Automatic wake-up call after the display of the elevator: cannot turn off this feature

  Hello, Toshiba!

  With the "hardware" program I put the switch on_ _automatic my laptop NB 510 _after raise the display_. Unfortunately, I don't have _can disable_ this feature.

  I tried in the 'Control Panel - Power' to disable this function, I tried to turn off this feature of the hardware configuration, but nothing helps.

  When I check 'turn off automatic registration' and restart my laptop, but nothing has changed.
  Also I reinstalled windows, I got out at 08:00 the motherboard battery, turn off the power to the laptop and remove the main battery, unfortunately, nothing helped.

  This is awkward for me, because when the laptop into my backpack, it sometimes turns on itrself and the battery is very low.

  How can I disable autoenrollment?...

  OS: Windows 7, Windows 8, system BIOS version 1.40, THIS Version 1.00, function 'Open Panel - Power On' ("Power Management" tab) in the BIOS disabled, but it still works...

  I'm really waiting for the answers, thanks a lot!

  PS sorry for my bad English, it's automatic google translate.

  I NB520 and it works fine (I can turn it off).
  Try please enter the BIOS and set the default parameters by using F9 and then save and quit with F10.

• Tecra A5 - charges the battery only when the computer is turned off

  Hello

  For a few days, my Tecra A5 has started to beep and stop it (like when the battery is low) then that it was connected to the power supply adapter.

  I finally realized that when the computer is plugged in, the battery discharge and does not use the power supply to recharge.

  On the other hand, if I turn off the computer, the battery starts to charge.
  I replaced the battery a few months ago, so I think it's still OK.

  The charger would be defective? Seems strange since it can always recharge the battery when the computer is turned off.

  Thanks in advance for your contributions.

  > The charger is defective?

  Theoretically; Yes, but could also be electronic supply on the motherboard is affected, but on the first stage of the AC adapter should be verified and laptop needs to be tested with AC adapter new, good work.

• We have a macbook air family.  I've implemented and have admin status and have put in place the other members of the family as users.  However if the unit is turned off, other users cannot connect without me logging in first.

  MacBook Air (13 inch, early 2015)

  10.10.5 Yosemite

  Intel Core i7 2.2 GHz

  4 GB 1600 MHz DDR3\

  Intel HD Graphics 6000 1536 MB

  We have a macbook air family.  I have set up on the purchase and created accounts for family members, but if the unit is turned off, they are all unable to access the boot until I connect and select their code.  If I do this, what they see on the splash screen is my ID.  Of course, I do not share my password with anyone, so it becomes a problem when I'm out of the House.  Please can you help me?

  Do you have system preferences > users and groups > Login Options set up like that?  You should.

  

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• use restart from scratch using the option "ALT F10" and lose everything. Help, please!

  Whenever I try to connect my laptop, a screen invites me to do a repair of launch set-up. It goes through the motions for ten minutes and the screen turns white. The only way I can get at all is to restart all from scratch using the option "ALT F10" and lose everything. Any advice I would really appreciate.

  Hello

  1. Since when are you facing this problem?
  2. You did any recent changes?
  3. What version of Windows is installed on the computer?

  I suggest that you go into recovery options and try to perform system restore and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Otherwise, I suggest you to give us more information, so that we can better help you.

  It will be useful.

• Task failed when the computer is turned off

  In the computer I use at the office, I need to create a task in Task Scheduler to run every month on the first Monday of each month. And everything works fine, except when that day's holiday. The computer is turned off during the weekend and holidays.
  If this occurs. How can I force this task runs next time I turn on the computer?

  In the computer I use at the office, I need to create a task in Task Scheduler to run every month on the first Monday of each month. And everything works fine, except when that day's holiday. The computer is turned off during the weekend and holidays.
  If this occurs.  How can I force this task runs next time I turn on the computer?

  You're overthinking this problem.  Simply configure tasks planned to inform you of missed tasks .  If the date of scheduled backup has been a weekend or a holiday with the computer off, the next time you turn on the computer you will get a notification that "some tasks did not run."  At this time, manually start the backup job.

• Wireless router WRT160N cable on the desk, I loose internet when the laptop is turned off.

  I have wrt160n v2 router wireless, it does not work for me.

  If my wireless XP laptop is only powered ON the Vista desktop internet wired connection works, I'm not wired or wireless using laptop computer, not on the internet, only power.

  If the laptop is turned off, I have no internet on the desktop, always connected via the router.

  The laptop is used and I didn't know if the without built-in thread was pretty new, so I bought a card to go in wireless.

  When everything is on everything is to play on the internet times two computers, but if you turn off the laptop I have to connect internet directly on the Office to continue in the internet.

  I started working with a tech support yesterday and they are difficult to understand. I had put in the new firmware and the problems persist.

  Can someone help me, I don't really have time to be on the phone for hours figure this all out.

  Thank you

  Jackie

  go to http://audipages.com/router/ and follow the instructions

• My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it

  Original title: HDMI sound

  I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!

  Hello

  System Restore does not have this long period of time.

  You may want to refer to the suggestions in the thread below link and check.

  No sound via HDMI output portable computer connecting to TV

  I hope this helps.