Similar Questions

• Can I use the same Add-ons for the Android version?

  I was thinking of buying a Tablet for use with my job - but I use a lot of modules and extensions - I was wondering if the extensions I'm used to use with my Windows Firefox version would work as well with Firefox Android?

  Hello maxwell_smart007, addons for firefox on android are a separate category: extensions must be carried by their developers to work on the mobile version of firefox. Here is the list of extensions for firefox on android that are hosted on the official mozilla page: https://addons.mozilla.org/android

• iOS 10.0.1 "not allowed to use the restricted network port.

  I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

  Safari cannot open the page.

  The error was: "not allowed to use the restricted network port.

  On iOS 9.3 using Safari 9, the same URL opens fine without this error.

  Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

  I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

  It seems I was looking at the wrong source code.

  I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

  https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

  It seems port got 4190 recently added to the list of blockedPortList

  2306	2049, / / NFS
  220V	3659, / / apple-sasl / PasswordServer [addition of Apple]
  2308	4045, / / lockd
  2309	4190, / / ManageSieve [Apple adding]
  2310	6000, / / X 11
  2311	6665, / / alternate IRC [addition of Apple]
  2312	6666, / / alternate IRC [addition of Apple]
  2313	6667, / / standard IRC [addition of Apple]
  2314	6668, / / alternate IRC [addition of Apple]
  2315	6669, / / alternate IRC [addition of Apple]
  2316	invalidPortNumber, / / used to block all the invalid port numbers
  2317	};
  2318	const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);

• Using the Ethernet Port on a remote Express

  I have just moved into a new House and has Verizon FiOS installed.  Verizon provided a router modem combination like my main wireless service.

  I have an IP phone that I need to use in my office located in another room and the Verizon tech said that it would be very expensive to run a separate line in this room.

  I have a generation current Airport Express.  I would like to use the Express to join/expand the wireless network in the office, but my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  If possible, can you give us some guidance on how to configure the Express?

  Thank you

  David

  I would use the Express to join the network wireless Office

  The AirPort Express, expected to be able to 'join' the wireless network that is provided by the modem/FIOS router, assuming that the device uses wireless standard... parameters and... He Express is located where it can receive a strong signal of the FIOS router/modem wireless.

  But, the Express can not "extend" or "repetition" of the FIOS wireless network, given that "expand" function requires the Express receive a wireless signal from another Apple wireless router.

  .. .my question is, the LAN on the Express port will be active so that I can connect the IP phone to the LAN port and use the phone via wireless Express?

  Yes.  In fact, you can use the LAN or WAN port, or both at the same time... because both ports behave as LAN ports when the AirPort Express "joins" a wireless network.

  can you give us some guidance on how to configure the Express?

  What camera... Mac, PC, iPhone / iPad... will you use for this?  What operating system is that it uses?

• Using the second ethernet port to connect to the printer?

  Hi I have a Mac Pro 2.1 old school and I'm wondering if I can connect to the network with an ethernet port and connect the latter to a printer?

  If so, how?

  Yosemite running.

  Thank you

  Physically, you use a port and a cable to connect to your network and use the second port and a second cable to connect directly to the printer. The printer must obviously have an interface Ethernet himself.

  However, you need to configure the second port on the Mac and the Ethernet port on the printer for each manually configured the TCP/IP addresses and these should be in a range of different network to your main network.

  If you the main network is something like 192.168.1.1 then your printer and the port on the Mac connection to this need to be in another network, such as 192.168.11.1.

  In theory, if the printer supports Hello aka. mDNS, then maybe you can get away with not having to configure TCP/IP addresses for the connection.

  The main reasons to use a second separate connection as this would be the performance or security, and frankly I don't think that's really relevant here. This would mean that no other computers on your network will be able to access the printer.

• Can I use the lan Ethernet port on the airport express to the release of music?

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers? I would use an Ethernet connector at one end a DIN 5 pin to a pair of speakers beolab 2500/2300. I don't want to use the PIN audio output on the Airport express, as it is analog. Possible music out through one of the Ethernet connections at the back of the Airport express? Thank you

  Can I use the Ethernet connections on airport express at the exit of music over wifi to a set of speakers?

  Sorry, but no.

  I don't want to use the PIN audio output on the Airport express, as it is analog

  Perhaps you weren't aware that audio port on the AirPort Express audio book Terminal analog or digital, according to the type of connector used. See this link on the AirPort Express specifications to confirm... http://www.Apple.com/Airport-Express/specs/

  In other words, for the Express deliver audio analog, connect a standard stereo mini plug with connectors appropriate to the other end.  To ensure that the Express deliver audio digital, plug a mini Toslink cable to the audio port on Terminal AirPort Express.  An example is in this link... Airport Express Toslink - Amazon.com

• Connect iPad Pro 12.9 "on PC 3 USB port using the new USB 3 iPad camera connection kit

  Hello. I would like to connect my iPad Pro 12.9 "to my PC using the speed of the USB 3 port of lightning of the iPad for faster synchronization with back ups. I bought the new camera USB 3 connection and A kit to A 3 USB cable, put everything together and down to iTunes, but it does not recognize the iPad. Has anyone tried this before?

  You don't need the Camera Connection Kit for this. Connect your iPad to your PC using the lightning to the USB cable supplied with the iPad.

• Using the Serial Port on the HP 50 g graphic calculator

  Hello world

  I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

  ~ Zekelegge ~.

  I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

  BartDb gave you the right answer.

  A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

  However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

  the streamsmart is not an aggregator of serial port.

  in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

  I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

  However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

  In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

  to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

  http://www.HPCalc.org/details.php?id=7105

  It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

  It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

• Is it possible to use the port replicator with the Satellite Pro series?

  Hello
  Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

  Hello

  No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
  All laptops that support the Port Replicator has a port extension at the bottom of the unit.
  To my knowledge, the Satellite Pro series don t have this port.
  For now only the Tecra and some units Protégé(ie: S100) supports this feature.

• How to connect Portege M700 to TV using the VGA port?

  I bought a VGA S-video/audio adapter and connected my VGA port and the TV.
  Nothing happened.

  In the control panel... no other display/external display was detected.
  Validations only that I ran using an emulator port or something.
  I have the Portege M700 preinstalled with Vista Business lozenges.

  Any ideas would be welcome.
  Thank you

  Hello!

  I have a Portege M700 too and there is no S-video port.

  If you want to switch between the following views the use of FN + F5 as Feliks said. I use the Portege M700 with an external monitor via a VGA cable and it works perfectly.

  Good bye

• Dynadock U3.0 - cannot use the Ethernet port after update 8.1 Win

  Hello world

  I use a u3.0 dock Dynadock with my Vaio PCS 13.
  I'm not able to use the Ethernet port on the Dynadock since I updated my Windows 8.1 device update 1.
  Before that everything worked well.

  I'm not able to re-install the drivers correctly (tried 7.6m0, 7.5m2). While the game driver tries to start, I get an error message, Setup is not able to put a bunch of registry (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) keys (up to 0). (Image 1)

  If I ignore these messages and do not install the driver, the Ethernet port will not installed in Device Manager. (Image 2)

  If I try to install the driver manually (DisplayLink network adapter NCM), I'll get an error message that a driver has been found but that access has been denied. (Image 3)
  I started the safe mode and could install the driver. But if I reboot in normal mode, the machine could not be started.

  I also tried to disable UAC and I am logged on as administrator 'real '.

  Please find the attached messaged (in German) error:

  [picture 1]: http://picload.org/image/lcalwop/toshiba.png
  [Picture 2]: http://picload.org/image/lcalwoc/toshiba2.png
  [Picture 3]: http://picload.org/image/lcalwlg/toshiba3.png

  BTW: If I unzip the Installer (7.6m0) and install * inf for the good Fri & dev (4503) it still does not work...

  I put t know what to do anymore...

  Hello

  After upgrade to 8.1 Windows, you should also update the software/driver Display Link
  This is very important!

  The latest version of the driver can be downloaded here:
  http://www.DisplayLink.com/support/downloads.php

  Note: the old version must be removed!

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• Can I use the Thunderbolt on my Mac Mini port to connect external studio monitor speakers?

  I have a set of technical Pro monitor speakers that use Bluetooth to connect to the Mac.  However, I don't like the way they sound on Bluetooth, and I prefer not to use the headphone jack to hang them either.  Is there a a way to connect them using the Thunderbolt ports or USB ports?

  http://www.TPRO.com/collections/monitor-speaker/products/powered-Bluetooth-USB-s tudio-monitors-mb6000

  Here is a USB audio

  http://www.Amazon.com/GP/product/B001MSS6CS?PSC=1 & Redirect = true & ref_ = oh_aui_deta ilpage_o02_s00

  There are the dock thunderbolt which have audio connections as well as other ports too:

  http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/

• Portege R500 - anyone using the DVI Port Replicator II on WIndows 7 Beta?

  Hello
  I'm using the beta version of WIndows 7 on my R500 and runnig it's just well except the DVI Port (on the Port Replicator II Slim).
  I have installed this software Fingreprint, battery bluetooth (which are recommended as a solution by the Action Center) and the 'TOSHIBA value added together"which adds the management software of power supply, control over the 2 hardware buttons and gives the FN menu to the screen to control the functions FN1-9.
  I think I can say it's definatively a driver problem, because if I start the R500, the windows loading screen appears on my screen, but when he switches to the desktop, the external screen turns off and the desktop on the screen of the laptop. Also, no chance to activate via FN + F5.
  I tried with the driver Windows 7 buildin, the latest driver from intel (15.8.3) and the vista driver provided by toshiba (7.14.10.1244), but none of them work: (unlucky
  BTW: the vga output works, but only UNdocked :(
  Does anyone have a solution or a tip what to do or try?

  Hello!

  First of all, I have to say that Windows 7 Beta is as its name the indicates that a beta so there might be some problems and it s not sure that everything works fine with Windows 7 Beta.

  Your problem: you see the second monitor in the display settings? There you can active it and mark the option extend my Windows desktop on this monitor.

  Lastly but not the least you should do an update of the BIOS if you have n t the latest version.

  Good bye

• Satellite A100: To receive data can I use the remote port IrDA?

  Hello

  I have an A100 which has infrared, which is used for the remote control supplied with the laptop. I was wondering if this infrared receiver can be used for other devices (e.g.: mobile phone) other than the remote control.

  I checked the control panel and Device Manager and both have no infrared information, but I thought that it would be always necessary even for the remote control.

  Help, please.

  Thank you.

  Hello

  I think that it s not possible to use the IrDA remote control window to receive files or data.
  I wonder how it should work if you don t have IrDA options in Control Panel.

  If this option is not available in the Control Panel, you cannot activate the IrDA and you can't assign a download or download the IrDA connection. So in my opinion you can't use it as a connection port.

  Unfortunately ;(

  But I found external solutions. If you want to use the IrDA, you can buy a USB IrDA key. I didn't test this device, but other people on the net have used it and it works.