Using the sequence @inlines - problems!

Similar Questions

• How can I use the sequence of the string "\u00e5" in myfile.txt converted unic

  How can I use the sequence of the string "\u00e5" in myfile.txt converted to unicode in my application?
  
  I have a text file, MyFile.txt, with some sequences represented unicode:
  \u00e5
  \u00e4
  \u00f6
  etc.
  
  This is the file contains unicode, not the character it represents: a, a and o.
  I get the sequence of the file and save it to a vector. When I tried to use it on a JButton, I see the "\u00e5" string and not the character that I assumed.
  
  

   
          read file codes ...
          ...
       Vector<String> glyphVector = readGlyphIndex.getUnicodeFiles();     // to retrieve the vector with unicode sequence and save it to glyphVector
       String unicode = glyphVector.get(0);     //get the first unicode sequence
          System.out.println(unicode);    //displays \u00e5 and not å in the console.
       jButton.setText(unicode);   //jButton is a JButton and it shows the string \00e5 and not the character å
          ...

  The question is how to convert the sequence of string to be a unicode escape in the code?
  
  In order to make it clear:

  //from
  jButton.setText("\\u00e5");
  //to
  jButton.setText("\u00e5");

  Thanks in advance!
  
  Dragonfly

  String s = Character.toString((char) unicodeInInt);
  

  Strictly speaking, if unicodeInInt is a Unicode code point (for example, it can be greater than 0xFFFF) then the correct code would be this:

  String s = new String(Character.toChars(unicodeInInt));
  

  However, since the "\u" notation allows only 4 hexadecimal digits (and need to 0xFFFF code points > Unicode represented by their UTF-16 encoding), the code above is not enough for this particular case.

• use the sequence grouping conditional Dynamics

  Hi experts,
  
  I have a simple task (?) - I want number (assign) groups (increase the number of Group) based on a condition.
  
  Here is an example: create groups numbered according to the number of Department (as per the same collection)
  

  create table emp as
  select * from scott.emp;
  
  CREATE SEQUENCE group_no;
  SELECT group_no.NEXTVAL FROM DUAL;
  SELECT group_no.CURRVAL FROM DUAL;
  
  /* automatic grouping - NOT WORKING!!!! */ 
    select ename, deptno, deptno_next, deptno_prev, 
     case when (deptno_next > deptno) then group_no.nextval else 1 end grp 
      from
        (select ename, deptno,
                lead(deptno) over (order by deptno) deptno_next,
                lag(deptno) over (order by deptno) deptno_prev
        from emp
        );

  PROBLEM:
  It seems that the sequence is increased, even when the condition for a new number is not satisfied!
  

  NAME      DEPTNO                 DEPTNO_NEXT            DEPTNO_PREV            GRP                    
  ---------- ---------------------- ---------------------- ---------------------- ---------------------- 
  CLARK      10                     10                                            1                      
  KING       10                     10                     10                     1                      
  MILLER     10                     20                     10                     130                    
  JONES      20                     20                     10                     1                      
  FORD       20                     20                     20                     1                      
  ADAMS      20                     20                     20                     1                      
  SMITH      20                     20                     20                     1                      
  SCOTT      20                     30                     20                     135                   
  WARD       30                     30                     20                     1                      
  TURNER     30                     30                     30                     1                      
  ALLEN      30                     30                     30                     1                      
  JAMES      30                     30                     30                     1                      
  BLAKE      30                     30                     30                     1                      
  MARTIN     30                                            30                     1

  Instead of

  else 1

  I use group_no.currval (same group number, when does not change do not Department). I know, I need to cover the previous number as well, but I did simple, because the problem here seems to be the sequence...
  
  Forward your support :-)
  Duik
  
  Published by: user10939560 on 08.10.2012 07:42
  
  Published by: user10939560 on 08.10.2012 07:44
  
  Published by: user10939560 on 08.10.2012 07:45
  
  Published by: user10939560 on 08.10.2012 07:48
  
  Published by: user10939560 on 08.10.2012 07:49

  "I want number (assign) groups (increase the number of Group) based on a condition."

  But he did exactly want you want. The number of groups is increasing. It is not contiguous, which
  You can not guarantee for sequences of anyway.

  However, if I understand you correctly, it's maybe you need:

        select ename,deptno,
        dense_rank() over (order by deptno) grp
        from emp;
  

  If this isn't the case, please explain in more detail what you are trying to do.

  Published by: Paul Horth on October 8, 2012 08:06

• Help! My Iphone has been reloaded, and I had been using the it, no problem.  Now says that I have to activate it, but says that the PW is fake.  I can't call because I have no other phone.  What can I do?

  Help!

  I was using my IPhone 6 without problem and a reload.

  It now States that I need to activate IPhone.  I walked into the Apple ID I have and

  the password, but it says I have the wrong.

  I can't ask for help; My IPhone is the phone I have.

  Help, please!

  You must use the credentials to iCloud for the account that was used to sign in iCloud and enable find my iPhone. If you bought it used, contact those who you bought it from. They will have to remove the lock. Only the owner of the account with which it locks can remove the lock.

• "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

  Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

  Hello X-x_MaGiC_x-X,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  System restore points are created automatically when the following occur:

  • When you install a new application or driver.
  • When you uninstall or install some programs.
  • When you install new updates
  • Automatically on a daily interval
  • Manually by creating a.
  • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

  So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

  Restore Windows Vista to a previous state

  In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

  If you can connect to Windows Vista, you must follow these steps.

  1. Close and save any documents that you have opened.
  2. Click the Start button to open your Start Menu. The Start button looks like this:
  3. When the Start Menu open click on the menu option all programs.
  4. Click once on the Start Menu Accessories group.
  5. Click once on the System Tools Start Menu group.
  6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

  You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

  1 screen of system restore

  By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

  2. the list of available restore points

  You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

  3. confirm the selected restore point

  If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

  4. second Confirmation

  If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

  5. restoration of a restore point

  When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

  6. system restore was successful

  If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

  7 undo the last system restore

  Your computer should now work correctly again.

  With the help of the restoration of the system in the Windows recovery environment

  Manual creation of Restore Points

  As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

  1. Click the Start button to open your Start Menu. The Start button looks like this:
  2. Click on the control panel menu option.
  3. Click the option menu system and Maintenance.
  4. Click on the system menu option.
  5. Click on the System Protection in the list on the left.

  You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

  8. the System Protection tab

  To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

  9. Enter the manual restore point title

  Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

  10. Manual restore point has been created

  Now that you have finished doing the manual restore point, you can close the system window.

  Try to download the correct and up-to-date drivers.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using the Rotate tool - problems

  I'm a newbie, but I know how to do this, at least I thought I did.  In short, I want to draw an ellipse, then use the Rotate tool to copy many of them, until I get a circle of them, using the lower part as the pivot point.  So if I want 36 steps, I put the angle to 10 degrees and copy, then ctrl-d to paste as needed to complete the circle.  The problem is, I can't get the pivot point for adapt to where I want to.  When I initially click on the ellipse first (and only), then my rotation tool, I then passes the pivot toward the bottom of the ellipse.  When I double click on the Rotate tool again to bring up the dialog box, the pivot point goes back to the Center.  Once the dialog box is in place, I can't set the pivot point more.  Furthermore, if I select the ellipse, select the Rotate tool, move the pivot point, then try ALT-click on the new point pivot, the newly copied and pasted ellipse will be elsewhere on the artboard.

  What Miss me?  Thanks for any help.

  Well I just found out the problem.  It's my Wacom driver.  I took my USB mouse and it worked like a champ, picked up the pen or the Wacom mouse and you never know where it will copy.  Thanks anyway.  At least now I know.

• Remove the song using the Brush tool problem!

  Hey guys. I have this problem where I am editing a clip of marriage the bride and married the first dance and someone shout up and strong throughout the dance! I have been using the Brush tool to remove the voice and did a good job doing that, however when I play the clip to see how much it deleted, I get either a noise grinding, or I still hear the voice, but he is confused or it the effects of other voices in the clip that I don't want. This is a mistake on my behalf or you have to do something else like add an effect to impress the survey?

  What you ask, despite all efforts to finesse, will not generate a perfect result. Live events such as weddings, are quite what you hear is what you get and the needs of the customers to understand that before you get into all those hours that will zap your gain at minimum wage.  I'd go to a different, more creative route.  Kill the original audio - record but these precious moments and cut in the music played in the bed.  When one of those moments arrive, dub/mix it.  Don't kill you on that.

• Use the Testsoftware, connection problems

  Hello. While trying to connect there is a pop up window saying: I am not abel to connect to internet, BUT I am connected and not in offline mode. What can I do to use the testsoftware?

  Could you help me please? Thank you very much. Alice

  

  Hello Alice Ka.,.

  You are on a managed network, if so, then please consult the KB: http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

  Kind regards

  Romit Sinha

• Better to use the sequence of one or more?

  Hello
  
  I have several tables, each with its own primary key. I don't like what are the values of primary keys; they do not have to be sequential or anything. Should I set a separate sequence for each table, or just set a single sequence and reuse it for all tables? Is how important it? Thanks for your help.

  928546 wrote:
  Hello

  I have several tables, each with its own primary key. I don't like what are the values of primary keys; they do not have to be sequential or anything. Should I set a separate sequence for each table, or just set a single sequence and reuse it for all tables? Is how important it? Thanks for your help.

  His 'clean' to have a specific sequence for each table. If nothing else, it's how things are generally implemented and when others see your design are likely to expect. In practice, is not relevant.

  In addition, users can become unhappy when the sequence numbers are missing (which will ensure your suggested design). It matters little that they aren't really missing something, the numbers can make users think that documents are missing. It seems preferable to have consecutive sequence values in the tables (it can also tell you later if records have been deleted)

• How to use the sequence of client web proxy.

  Hello
  
  I created a sequence in the database.
  
  And I'm sure in EntityImpl as:
  
  SequenceImpl sequence = new SequenceImpl ("Sequence_name", getDBTransaction);
  setAttribute (sequence.getSequenceNumber)
  
  I'll put the attribute with the val sequence automatically.
  
  
  But I want to get the value of the sequence in the web proxy client generated by WSDL.
  
  Right now, I'm writing the same code and imported files.
  But it gives me error that:
  
  java.lang.nullPointException.
  
  
  How to access the sequence in the web proxy client generated by WSDL.

  Hello

  expose a method on the ViewObject and make it available to the service interface. In the Web Services it is meaningless to create dependencies between a customer and the details of the implementation of the service.

  Frank

• lighting of 3 leds using the sequence meal and time delay VI express?

  run the vi and a LED light, 1 second later, the 2nd led should light, 2 seconds later the 3rd led must light up then everything must stay on for 3 seconds, I need to use a flat sequence with 3 images and express time in each image

  Tips or advice would be grateful im a little new to this iv not been mess autour with her and to this day no luck

  Nevermind I got it

• Audio output using the USB connector problem

  I use a USB connector to connect with Audio output. It's because my headphones Jack does not work.

  It worked without problems so far.

  My problem is that there is no output from my laptop to this USB device. The music plays and can be heard on the laptop. Connections (USB device & son) of the laptop work.

  I'm ising Vista home versio

  Any ideas?

  Try this:

  With the USB speaker connected, right click on the speaker icon on the tray (right), left click on 'sounds '. On the tab 'Read' the USB speaker should be listed, click to select it, and then click the button "set as default". Click the OK button to exit.

  Alternatively, you can go to control panel, Sound.

• Can no longer ride with call button using the api? Problem: Click on the context Menu displays on trackball?

  Hello

  1. every person has idea on the management of the events of call button. ?

  By default the call button (shows) invoke the window call log while relying on the call (phone icon) button in the phone.

  But I need to call some methods in my application (IE to a selection button).

  2. by default, the track ball click calls menu Contaxt. I don't want to activate (Show) menu by click on the trackball?

  (Only for the track ball click)

  Problem: in my application by clicking the trackball on a ButtonField to a new main window main window.

  Press escape (pop, the new window), the menu here

  To your first question:

  Make an application that has the following method implemented:

  protected boolean keyDown (keycode, int, int times)
  {
  Switch (keycode)
  {
             
  box 1114112: / / green key

  Insert your code here

  break;
             
  }
  Returns false;
  }

  For your second Question:

  invokeAction() implent method, the problem will resolve.

• is it safe to use a view control of sequence to display the sequence file both for execution

  I have a Teststand UI written in Labview 2012.  It has a single control of sequence, and I use the ConnectSequenceView method to switch between the display just the loading sequence file and the running.  Allow me to reiterate.  When a file sequence is running, the control is connected to the execution Manager.  Otherwise, it is connected to sequenceFileView Manager.

  I begin to suspect that I have questions related to this control, when I do the following.

  1. load a movie file

  2 run Single Pass

  3. the execution ends

  4. unloading and Release sequence file

  5 load a different sequence file

  6. run single-pass

  7 Labview crashes

  Am I missing a step?

  Thank you

  Kevin

  So it seems the crash of Labview, I mentioned in the original post is unrelated to the joint use of display of the sequence control.  However during my troubleshooting, I noticed that I was missing cut from a point of view of control stage before connecting the other view.

  And for the record, I think that there are many things wrong with the architecture used in the complete example, but there also many too many features for what to.  Just need a simple "press a button" and "run a test" for operators.  Everyone uses the sequence editor.

  All right.  Thanks for the comments.

  Kevin

• is there a way to impose the use of sequences

  is there a way to stop someone to insert an id without using the sequence?
  

  CREATE SEQUENCE id_seq
     START WITH 1;
  
  CREATE TABLE test_table (id_seq NUMBER (4) PRIMARY KEY);
  
  
  
  INSERT INTO test_table
       VALUES (id_seq.NEXTVAL);
  
  INSERT INTO test_table
       VALUES (2);
  
  INSERT INTO test_table
       VALUES (id_seq.NEXTVAL);

  gives us
  ORA-00001: unique constraint (DSAMSTRC. SYS_C0091648) violated
  as it should be
  
  However is it a check constraint of some ilk who made sure the user uses the sequence during inserts?
  then the second insert
  

  INSERT INTO test_table
       VALUES (2);

  gives me a sort of violation of check constraint that I do not use the id_seq. NEXTVAL?

  Allows you to encode the audit in a trigger

  SQL> ed
  Wrote file afiedt.buf
  
    1  create trigger trg_test_table
    2    before insert on test_table
    3    for each row
    4  declare
    5    l_currval integer;
    6  begin
    7    select id_seq.currval
    8      into l_currval
    9      from dual;
   10    if( l_currval != :new.id_seq )
   11    then
   12      raise_application_error( -20001, 'Hey!  Use the sequence' );
   13    end if;
   14* end;
   15  /
  
  Trigger created.
  
  SQL> INSERT INTO test_table
    2       VALUES (id_seq.NEXTVAL);
  
  1 row created.
  
  SQL> INSERT INTO test_table
    2       VALUES (id_seq.NEXTVAL);
  
  1 row created.
  
  SQL> INSERT INTO test_table
    2       VALUES (25);
  INSERT INTO test_table
              *
  ERROR at line 1:
  ORA-20001: Hey!  Use the sequence
  ORA-06512: at "SCOTT.TRG_TEST_TABLE", line 9
  ORA-04088: error during execution of trigger 'SCOTT.TRG_TEST_TABLE'
  

  But at this point, you're probably better just to have the trigger complete the sequence column ignoring all that was passed in.

  Justin