Using the system on a Dell XPS 13 restore

Similar Questions

• I am looking for a solution Server (with Te css) for the fact that Firefox uses the system DPI settings, which makes my site look (too) big.

  My site appears much too big in firefox. And I want all browsers to view my site properly.
  I know that there are settings wihtin firefox that fix this problem. But I'm looking for a solution on server side, so that visitors to my site must not be disturbed by changing their settings.

  You may need to change your site as soon as 30 Chrome and IE 11 will also use the system DPI setting (like Firefox does now).

  Possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

• Pavilion 2000: Using the system restore

  I used the system restore in the past and I know it took a few hours to complete with good results, as it eliminated the problem. Last week, I used the restoration of the system, the screen turned blue and the restoration began however this continued for more than 3 days!  I was unable to use my laptop for so long. I saw a blue screen with an icon swirling in the Center. Miraculously, the day 4, he came back to life, but immediately began to update the apps I had checked to only not to do. It took an extra day. Actually, now it's back to normal. I am now afraid to use the restoration of the system again. What I've done wrong?

  Hello

  Thanks for posting in the HP Support forum.

  Could you provide your full computer model - information can be seen from the service tag sticker > > http://h30434.www3.hp.com/t5/Miscellaneous-Topics-Read-Only/Advice-for-asking-the-quot-Very-Best-Question-quot/td-p/83280 ?

  Could you confirm your OS - is this Windows 8/8.1 now?

  I see your previous thread in the attempt to upgrade to W10...

  I'm not sure about what you were wrong (if anything), but

  System Restore is a feature of Windows that usually takes minutes (30 minutes max) in full, not hours, not days. It restores the Windows registry, files/settings of the system to a previous state and is generally quick.

  Do you mean the system recovery or system reset/refresh?

  These are different things. These restore original Windows or format partitions on HARD drive - it can take an hour or 2-3 max but not days.

  If these (especially system restore) lasts days, there is indeed something wrong with the operating system.

  Looking forward to your confirmations.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• You want to connect to Xbox Live 360 using labtop. Cannot use WMI. Windows says THAT WMI is damaged, use the system restore. System Restore will not restore to any point I use.

  I tried to connect to Xbox Live on my Xbox 360 to internet using Wi - Fi to my labtop. I want to enable sharing on this topic in the Advanced tab, but I get the message that says WMI is damaged and I need to use the system restore. However, the system restore will not restore the system at any time I choose. What is the solution?

  OK you have an ETHERNET cable? (cable for PC to the Modem)
  What OS do you have?

  Heres to help, you need to an ethernet cable, or adapter wireless XBOX 360.

  With the ethernet cable, connect one end on the XBOX and one end to your laptop.
  You go to control panel > network and Internet > network and sharing Center > change the adapter settings. Then you select your wireless network and your local network. Then you right click and press 'CONNECTION of BRIDGE' (requires administrator privileges). After that your DONE! Just check if it works on your XBOX 360!

• When I try to use the system restore I get is an empty box where the restore points should be restore which stops me using the restore of the system how can I get the restoration back bridges

  I tried to use my system restore, but when I go into it all dates are missing from the box and I can't use the system I tried many different things, but nothing is done, everyone has ideas

  If your system restore page display only the title bar 'System Restore', or your accounts settings page of users shows that the 'User accounts' title bar and the screen where information needs to be is an empty white box...

  System Restore is a frequent target of attacks by malicious software.  If SR was working before and is now afflicted, run some scans and then fix any problems.

  Remember that the system restore is not a time machine.

  Your system is currently or has been reached by malicious software.

  You can now fix the symptom and scanning for malware later, or you can now find malware and fix the remains later.  I recommend just fixing the symptom of the empty page and forget to do the scans.  The symptom of the problem of fixing and fixing the problem are two different things.

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

  The scans using own it may also be necessary to re-register some dll (or you can do this part first, but you still have to do the scans).

  Just fix the immediate question:

  Looks like your file jscript.dll became somehow not registered so you can re-record it.

  There are probably a few other things that do not work you know yet, so fix them all at once.

  Re-registration of these DLLs is correct, even if they do not need renewal.  You can also re-register the dll before the scans that can solve the problem, but the scans are always recommended.

  Click Start, run, and in the box enter orders following one at a time.  Click the OK button to execute each command one at a time.

  regsvr32 jscript.dll
  regsvr32 vbscript .dll
  regsvr32 /i mshtml.dll (it's a look of slash)

  The last order for mshtml load the DLL but can also contain a harmless warning depending on your environment.

  Now check your timetable for restoration of the system and/or the user account settings page.

• Error: "the system restore is disabled by group policy" when he tried to use the system restore

  Original title: group policy

  When I try to use the system restore, I get "system restore is disabled by group policy. How can I fix this problem?

  Hi bluelilly,

  1. is your computer connected to a domain?
  2. don't you make changes before the show?

  This occurs if the Configuration policy to disable is enabled on your system, either by using Group Policy or through the registry editor. For stand-alone systems Windows Vista, follow these steps:
  Step 1: Using the Group Policy Editor. If your edition of Windows Vista includes the Group Policy Editor (gpedit.msc) snap-in, follow these steps:
  a. Click Start, type gpedit.msc and press ENTER.
  b. go to the following branch: Computer Configuration | Administrative templates | System | System restore
  c. double click on disable the Configuration and set it to not configured.
  Note: If the above setting is already set to not configured, set it to "Enabled" and click on apply. Return back the setting to not configured, then click on apply, OK.
  d. Quit Group Policy Editor.
  e. restart the computer and check the difference.

  Step 2: Using the registry editor
  a. Click Start, type regedit.exe and press ENTER
  b. navigate to the following key: HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore
  (c) in the right pane, delete the value named DisableConfig.
  d. Quit Registry Editor.
  e. restart the computer and check the difference.

  Very important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
  See Registry backup

  If your computer is connected to a domain, then we recommend that you post your query toTechnet Forums Windows Vista to improve the assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

  original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

  "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

  Please try the troubleshooting below to check the status of the shadow copy Volume service

  1. click on start > all programs > Accessories > run

  Type the following text in the run window, and then click ok:

  Services.msc

  You will get the Services window.

  2. Please check service Volume shadow copy service is "started" and "automatic".

  If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
  On the window properties, please change the startup type to automatic, and use the Start button to start the service.

  Click on apply, click ok.

  Close the Services window

  Restart the computer and check if the problem occurs again.

  If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  I hope this helps
  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.

• By using the system restore before computer restart after updating Windows 10...

  I chose to try the upgrade of Windows 10 on my laptop primary.  Because of the long installation times, I started late in the evening then followed finishing (or almost) the update the next morning.  Until I sat down to 'start' I spoke with a friend who had just completed an installation of two heavy day of problems.    Although I am good enough to solve computer OS and software installation problems, I was very reluctant to go forward.   After serious soul searching I elected continue to use Windows 7, I don't really like.

  That's why I chose to use the system restore before restarting my computer needed complete Windows Update 10.  I chose the previous restore point before the update of windows 10 and ran through the entire procedure and then restarted the computer after the restore point.

  Everything worked fine and I was able to do the foregoing... Except that I can't do updates of security that have been uninstalled.   The Windows Update screen repeat "you must restart your computer...". "with the reboot by holding the active button.

  This window doesn't go away even after reboot, and I can not "check for Updates".

  Does anyone have any suggestions on how to reset this program if I can do all the updates except Windows 10 security.

  Thank you for any assistance.

  By using the system restore before computer restart after updating Windows 10...

  Sorry, System Restore does not cancel the major updates, that's why a lot of automatic updates delete all system restore points. The tool that is appropriate in this case would be a restore Image. If you have not created an image before the upgrade, then you are out of luck.

• Using the "System recovery" Recovery Manager, it will erase the partitions?

  Hello, I was counting on the creation of a second partition for windows 7.

  What I want is two partitions one with windows 7 and one with vista. This is the easiest part.

  Now, I was planning on moving over my larger files, which is a lot of music and a lot of digital photos on the windows partition 7. Then, I wanted to clean install vista using the system recovery feature built into the computer. Now, I see it says restore my computer to default settings, but it's a little vague.

  So my question is, even with 2 separate partitions would be a system recovery remove them both and combine them into 1, just like when I got to my computer? Or would it restore my vista partition just like it was when I got it? I've really messed with the recovery of the system too, so I don't know if there is an option to select a partition, or something, I don't want to go overboard and remove my pictures and music.

  And there are a lot of things, like 50 + GB combined, it would take a lot of time to save it online, but if that's what needs to be done, so be it.

  Thank you!

  Also the laptop I use is a Hp pavilion Dv2500 with just vista on it right now.

  Hello

  The answer is no. The Recovery Manager has his job to do once tell you her to begin.

  The HP Recovery Manager will do its thing and restore your laptop provided that delivery. It is a destructive process in terms of all the space on your hard drive, except for the recovery partition. You will find yourself with a Vista partition (C and a recovery partition (D when it is done.))

  This means that when the recovery is complete and you have all the drivers loaded, you can use the Vista Disk Manager to create your partition in Win 7.

  I hope that this makes it more clear.

  Kind regards

  ERICO

• Is it possible to use the system of students on 2 devices

  If I buy a comprehensive plan under a student account, I am able to use it on 2 devices? On my macbook and my ipad.

  Please see: is it possible to use the system of students on 2 devices

  (Double Post)

• I signed up for 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  I signed up for a 30 day trial and I just got a notification if the trial ended. I did not use the system for more than 30 minutes.

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html

• Use the system account option is disabled

  Hey al;

  When you are installing vCenter Server 4.0, in the page of the Service Server vCenter, use the system account option is grayed out and I can't select it. Why?

  P.S. This option is available when using SQL Express, but when I use use an existing database support, the option is disabled.

  Can someone help me?

  Thank you

  -Reza

  Your SQL server server is configured to use Windows authentication?

  If so, you may not use the system account.

  AWo
  VCP / VMware vEXPERT 2009

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Update hard disc on the special edition of Dell XPS-8900

  Hello, I have a Dell XPS-8900 that I bought a few months ago, and you want to upgrade the hard drive.  There to 2, 7200 RPM hard drive + Cache SSD of 32 GB m2.  I noticed by looking at the disk management, it has 2 free sheet music; a 39 MB OEM Partition and 11.73 GB recovery Partition.  Both show that they are 100% free.  I created the recovery USB disk and it deleted the recovery Partition files.

  Should I still have the Partition recovery or the OEM Partition?  When I switch to a new hard drive, is it possible to simply copy the partition of the OS?

  Also, I thought that he would have an EFI System Partition.  Is that what I need or installation?

  UEFI allows secure and start for 2 t boot partitions format: those are the two major differences, as well as the withdrawal of the restriction to have four primary partitions per disk.  Those who are not important here.

  I don't think that there is a capacity limit on the m2 in height slot, but there is most likely a limitation of the physical size of the map itself which may restrict your ability.

  You will get the best performance from the system running the operating system for one SSD drive for some.  You can easily find 2.5 "SATA SSD affordable up to 1 t in size now.  Drives 2.5 "tend to be less expensive than m2 format disks, although NVMe readers (whose prices are in the stratosphere), they are largely very reasonable in price for the exception.

  I would not necessarily fear disks 3.5 "Toshiba - these are in large part the designs of Hitachi/HGST (Toshiba entered the market of disk 3,5 '' when WD resumed HGST - the Chinese Government opposed the consolidation to two manufacturers of records based in the United States and forced to WD to spin off plants making the disks 3.5" to Toshiba).  The HGST designs have a good reputation for reliability - much better than those of Seagate, for sure.

  You are probably better off with a straight on the clone of the drive.  You can use the Windows Disk Administrator to change the partitions later.  I had the good luck of late with Macrium Reflect (free), but Acronis image works well - and Samsung provides a free version of it if you choose one of their SSDS.