Using the USB audio device as default instead of analog audio ports
Audio microphone USB installs and is listed in the devices under sound, video and portable with Dell computer game controller devices running Windows Vista, but the problems the system to use the USB mic as the default. The sound devices list has also IDT HD audio codecs indicated, and the system will analog as the default input channels for the microphone, with no way to install the USB device. Is it possible to put the USB audio as default microphone device?
Hello RSA 456,.
Many sound problems are caused by hardware that is not configured correctly. We will check your sound card, connect the cables in the correct locations, ensuring that the material has the power and the verification of the volume.
Please follow the method described below to solve the problems.
Method 1:
1. plug your USB microphone.
2. the LED will light to indicate that it is powered USB.
3. Windows will automatically detect the USB Audio device and install the universal drivers.
4. to set up your microphone as default device USB Open Control Panel.
5. Select display as a classic view of your control panel, then select Select Sound.
6. click on the recording tab. Here your USB Microphone will be listed.
7. click on the USB microphone. If there is no checkmark beside the USB Microphone, click on set as default.
8. the default device is used in most programs such as tape recorder simple registration.
Method 2:
Please click the link below to check how to check if the hardware works just fine.
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02
Kind regards
Sooraj.S
Tags: Windows
Similar Questions
-
Issue using the usb storage device
Windows 7 does not recognize one of my usb memory sticks. It makes a noise when I plug
Issue edited by the moderator to add clarity.* *.
It makes a noise when I plug
A USB device that makes a noise is defective. You need to replace it.
-
Using 2 USB Audio ports simultaneously
I have two headsets for Skype. Both use USB ports, how do I me audio through two of them at the same time?
Hello Dank1979,
In order to have sound through multiple devices at the same time, you will need to have several audio cards installed on your system. Other that this option, there is not a way to perform the action you want.
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
How can I get the USB Audio device in option audio device for Windows XP?
USB Audio will not appear as an option. However, the Audio USB headset is an option. Help. Thank you
Hi VincentMr,
· What is the brand and model of the USB audio device?
You may need to install the device drivers on the device manufacturing site, or else you must have received the CD of the software with the device.
See the following article for more information on the update of drivers:
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658
Let us know the results.
-
Original title: Please help!
I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l
Hello
Thanks for posting in the Microsoft community!
You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.1. don't you make changes on the computer before the show?
2 are you able to get any USB devices to work in USB ports?Check the status of the device and the driver Version:a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
b. double-click the category containing your device driver and thendouble - click the device name.
c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.
d. click OK, exit Device Manager.
Method 1:
You can update the drivers on the manufacturer's Web site and check.http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyMethod 2:
Use Windows Update to find a device driver
Note to use Windows Update, you must be connected to the computer as an administrator:Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
b check the updates.
AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.If updates are available, click the driver you want to install, and then click on install.If you are prompted for an administrator password or a confirmation, type the password, or click on continue.If you need further assistance, please answer and we will be happy to help you.
-
Passport for blackBerry I can attach Blackberry passport for HP laptop using the USB cord?
If I buy the new passport of BB I can attach by using the USB cable to the laptop HP?
I currently have a BB Torch, and I connect via BB Desktop using my AT & T data plan to access the Internet when I'm out and about. I like to use the USB cord to attach the unit to the HP laptop. I think I get a strong signal in this way. I'm not a big fan of wifi.
I want to buy the new passport, but if I can't attach it so I don't know if I'm ready to change devices.
Yes it is supported, it is here in the manual
-
How can I use the USB ports in Windows XP Mode?
Windows XP mode
I need to use the USB port, but are not available in Windows XP mode, how do they available?
Thanks, I need an answer soon.
Plug the USB device, click the USB menu
Click Attach device.
Please wait while this one is initialized.
-
No signal is detected by the TV (KDL55HX800) using the HDMI source devices after the storm
No signal detected by Sony Bravia TV (KDL55HX800-S/N 8114631) using the HDMI source devices after a storm last night. Inputs RGB and components work fine.
I have reset to factory default
Installed the latest software/firmware from Sony site
Checked the HDMI cables and selected the correct entries to the TV but even problem
What could be the problem? At main / V Board? If so, what is the replacement P/N and where can buy it go? Link to store etc.
Thanks in advance
Hi mgkaundi!
-
Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you
You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.
-
It is possibel to print wireless with a TG1672G of ARRIS, use the USB port on the modem?
Hello
There is no print server function so you can not:
http://gditechnology.com/manuals/Arris_TG1672G_Data_Sheet.PDF
Kind regards.
-
Impossible to scan: "another program or computer using the HP imaging device.
Original title: hp scanning problem
I can't seem to find anything on the hp site regarding my being not scan with the center of Solution because that 'another program or computer use the HP imaging device ". I have my Officejet 6500 connected via an ethernet cable in my Linksys routeras is my internet modem. Someone has an idea? I can print fine; I can't scanner to work other than the program with the paint. Thank you for coming so someone can help out me. -Steve M
Hello
I suggest you to visit the following links: http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Networked-C6280-and-Windows-7-64-bit/td-p/217282
I hope this information is useful.
-
I am facing problem in my laptop using the USB copy/delete files
Dear Sir
I am facing problem while using the USB in my lap top to delete/copy files
Hello vasarao,
What is the problem you are having?
You receive error messages?
Please provide us with more details and we will continue to solve this problem.
Best regards
Matthew_Ha
-
Using the USB XP gives error code 10
Use the usb port it says error code 10
Read this:
http://forums.WinDrivers.com/showthread.php?t=54371 -
By mistake, I clicked file history on. The USB key used for ready boost is selected and that the disk is write protected. Windows 8, 32-bit: how to cancel the file history and use the USB for the sole purpose Ready Boost. I don't have an another USB suitable for ready boost.
Hello
You should be able to disable the history of files by using the local Group Policy Editor. Consult this publication of the article. Use the #2 option.
-
Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/
The following steps may be worth a try:
Insert your memory card into your Media Player...
Reach... Start / computer...
What is the memory card show as a drive letter? (if your Media Player)
has several slots, there will be several "hard drives" listed... the
SD card will be one of them)If_Yes_right click on the drive letter correct and in the menu... Choose...
Open... now you should see the directory of the memory card or to explore.From there you should be able to drag and drop or copy and paste the
files in a folder on your hard drive.Also... the following items may be worth a visit:
Windows Vista-
Troubleshoot AutoPlay
http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problemsWindows Vista-
How to change the auto run settings
http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settingsWindows Vista-
AutoPlay: Frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions
Maybe you are looking for
-
How can I get TB automatically delete messages on the server and NOT remove TB?
My old version of TB has allowed me to delete messages from the server, because they have been downloaded to tuberculosis. How can I get the new version to do?
-
It was working fine last week and now I get this error in Windows Media Center, "some of the files needed to play radio or video are missing or corrupt.Record of components Windows Media Center may have failed. » HUH? I use Vista x 64. I looked this
-
Windows error code ox80070005 backup: access denied
Original title: error code ox80070005 I'm trying to backlup my files how do I get this error? It tells me access is denied.
-
Hello everyone. I have implemented pan that my TextArea to cover by the softkeyboard but I need to affect only the TextArea component. My application is divided into 2 sections. A text box and a button group. As it is now the Group of buttons scrolls
-
Get a "0 x 80070057" failed to format Windows error when I try to clean up the format!
Hi guys... I have a Windows 7 system that has a 250 GB Western Digital SATA... I have not used this system as 4-5 months... Recently, I wanted to format install the system, so I used my CD of Installation of Windows 7 Ultimate x 64 to try a cleaning.