Using the XY Positions of the graphic intensity sliders
Hey all,.
I have an application that displays a graph of the intensity. I have two sliders on the chart that I use to make a box around parts of it to "zoom in". Right now, I manually type in the positions X and Y of two sliders in the areas of digital control, for use on the rear panel. Is it possible to use numbers without enter them into digital orders every time?
Thank you
LANL13
You almost her, simply use the ActCrsr property to set the active cursor before reading the values. Exploited property nodes sequentially up and down then write the value of ActCrsr on top, then pull down, then add the properties of cursor position.
Standard workflow you get used to using the properties with graphics. Set the cursor assets/plot then read/write of interest properties, often this is done in a loop For.
Tags: NI Software
Similar Questions
-
Satellite U300-14 b: can I use the graphics driver for the Intel page?
My Satellite U300-14 b (VIsta 32 bit Home Premium, 2 GB) has a 'Mobile GM945 Express Chipset Intel'. Download from Toshiba site, says I've got the latest driver, namely 7.14.10.1263 dated 04/25/07.
The Intel site lists their latest driver such as in date 7.14.10.1364 dated 11/12/07.
I want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep. I am told that the graphics drivers are often to blame and should therefore be updated.
Can I safely updated with version 11/12/07, or I risk of problems? Not sure if Toshiba are just slow to release the updated driver, or if there is a better reason that they did not?
Well, usually you can use the graphic driver directly from Intel page but I found several threads here in the forum that said that the chart non-Toshiba drivers can be installed and used only at your own risk
> want to try the latest version of the driver to help solve a problem of occasional crash / restart when Vista wakes from sleep
Hmm perhaps this problem could be related to the graphics driver, but I recommend you to update to Vista and install all THE patches for Vista.Best regards
-
Can you suggest that we use the graphic card for my office?
Original title: graphics card
Resected Madam/Sir,
Greeting of the day!
can you suggest that we use the graphic card for my office.
my desktop configuration
RAM: 2 GB STROTINUM
MOTHERBOARD: GA-G31M-ES2L-DDR-800/REV.2
PROCESSOR: Intel (r) PENTIUM (R) 4 CPU clocked at 2.66 GHz 2.67 GHz
SUSTEYM OF OPERATION: 32-BIT WINDOWS 7
I'm studding 3d max or Architectural programmed.
Please suggest me with retail prices where to buy the graphics card.
Hi John,Thanks for posting your question in the Microsoft Community.I suggest you to use your favorite search engine to find the details of the graphics that suit your needs.In addition, you can contact the store nearest computer hardware for more information.I hope that the information above helps you. -
I'm black or white rectangles covering my picture while I'm working. I unchecked the camera raw 'use the graphics processor' I use an end 2013 27 "iMac. Can anyone help?
Hi Joel,
- What version of Photoshop installed on your computer?
- Also, please go to the Photoshop preferences, then the performance tab.
- Here please click Advanced under 'Use Graphics Processor' settings and change the mode of drawing on 'Basic '.
- Also uncheck "Open CL"
- Restart Photoshop and then try to open an image and see for the boxes.
Let me know if it helps.
Kind regards
Tanuj
-
I tell Lightroom to use the graphics card in my new laptop?
Hello!
I have a new laptop and have managed to transfer my photos, the catalog and LR parameters everywhere.
There better than my previous specifications, including a decent (I think!) dedicated graphics card. I have integrated graphics before so don't know how it works. I must say applications, such that Lightroom, to use the graphics card, or it will be automatically be done by the software/operating system? If I don't need to do something, it's to each software (like Lightroom), the parameters of the computer, or in some third-party control software?
Thanks for your thoughts.
Now Lightroom doesn't take advantage of the features in higher-quality graphics cards. It remains to be seen if that change at some point in the future.
-
Satellite P750 - overheating when using the graphics card
I have a Satellite P750. I have a few games that I love to play, but I am unable to because that laptop overheating during the execution of these games.
The specifications of the P750 with GeFORCE 540 m graphics card and 8 GB of ram easily meet the requirements of the games (Counter strike source, cod mw3).
While playing the games for about 10 minutes, all right.
After this step, things start to warm up, and small defects appear on the screen.Small rectangles of messed up graphics.
If I don't leave the game immediately, I get a BSOD with errors such as "IRQL _less_than_or_Equal.The vent on the left side of the laptop runs very hot when this happens.
I cleaned dust vacuum on and uses a fan/cooling pad to try to cool it.
Makes no difference.I updated to BIOS and graphics card drivers
WHAT CAN I DO TO PREVENT OVERHEATING WHEN YOU USE THE GFX CARD
Hmm using the page of the Toshiba driver graphics driver?
Such driver is a bit different from the other nVidia drivers because it s modified for mobile use. It contains some kind of overheating protection.
In case of higher temperatures of GPU, such driver would clock down GPU performance in order to increase the temperature of the GPU. -
In real time several parcels using the graphics buffer XY?
Hi all. My teacher wanted to add a second set of data to the plot in real time, I've created in my vi. I was able to trace the two sets of data, but not as two plots. I managed to add a second point of y to the plot. What is the appropriate method for the use of a buffer of xy-graphic inside a loop to draw two separate parcels?
The idea is that once I have two plots I can adjust a second axis and adapts the second group of data to this axis.
Thank you!
Nukem,
LabVIEW 2010
PS. Here is a picture of the small section of my program which is graphically representative data.
-
Several Bluescreens when you use the graphics card
I've been making blue screens because of the VIDEO_TDR_FAILURE for some time now, and recently reinstalled windows to see if it would fix it. Unfortunately, it didn't, and I get more accidents all in game. So far, I checked my HDD with Seatools, entered back fine, RAM with memtest which was very good. (but only a couple going so far) The only thing that I have not been able to verify correctly is the graphics card. Right now, game will work if I use my integrated graphics to run, but even then it sometimes freezes.
What should I do to troubleshoot my graphics card? I use a laptop, so opening the case is out of the question. I cleaned the dust and used several different discs, including my laptop was originally and the newest one. The temperatures are not the issue that the accidents have occurred anywhere between 50 to 70 degrees C. Can I still help out, or should I take the laptop in the computer store and let them look?
Hans
The pilot checked dumpster was related to your driver Audio MBfilt64.sys 4 + years of Creative Technology Ltd. I'd install the most recent driver available.
You can disable the auditor auditor/reset from an elevated command prompt
Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [C:\Users\Ken\Desktop\070114-15906-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol of validation of the path summary *.
Location of response time (ms)
C:\Users\Ken\Desktop OKSymbol of validation of the path summary *.
Location of response time (ms)
Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is: C:\Users\Ken\Desktop
Windows 8 Kernel Version 9200 MP (8 procs) free x 64
Product: WinNt, suite: TerminalServer personal TerminalServer
By: 9200.16384.amd64fre.win8_rtm.120725 - 1247
Computer name:
Core = 0xfffff801 'b161e000 PsLoadedModuleList = 0xfffff801' b18e8a60
The debugging session: Wed Jul 2 02:35:24.384 2014 (UTC - 04:00)
System Uptime: 0 days 0:00:19.201
Loading the kernel symbols
...............................................................
................................................................
...................
Loading user symbols
Loading unloaded module list
........
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck A, {0, 2, 0, fffff801b168fb76}
WARNING: Unable to verify timestamp for MBfilt64.sys
ERROR: Module load completed but symbols can be loaded for MBfilt64.sys
Probably caused by: MBfilt64.sys (MBfilt64 + 1817)Follow-up: MachineOwner
---------7: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: 0000000000000000, referenced memory
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: fffff801b168fb76, address memoryDebugging information:
------------------READ_ADDRESS: GetPointerFromAddress: unable to read from fffff801b1974168
GetUlongFromAddress: cannot read fffff801b19741f8
Paged 0000000000000000CURRENT_IRQL: 2
FAULTING_IP:
NT! KeSetEvent + 1 c 4
fffff801'b168fb76 b 488 09 mov rcx, qword ptr [rcx]CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: AV
Nom_processus: System
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre
TRAP_FRAME: fffff880031fd960-(.trap 0xfffff880031fd960)
NOTE: The frame trap does contain not all registers.
Some registry values can be set to zero or incorrect.
Rax = 0000000000000000 rbx = 0000000000000000 rcx = 0000000000000000
RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
RIP = fffff801b168fb76 rsp = fffff880031fdaf0 rbp = 0000000000000000
R8 = 0000000000000000 r10 = 000000000000f28e fffff88003041180 = r9
R11 = fffff880031fdb00 r12 = 0000000000000000 r13 = 0000000000000000
R14 = 0000000000000000 r15 = 0000000000000000
iopl = 0 nv in pe of na EI pl nz cy
NT! KeSetEvent + 0x1c4:
fffff801'b168fb76 b 488 09 mov rcx, qword ptr [rcx] ds:00000000'00000000 =?
Reset the default scopeLAST_CONTROL_TRANSFER: from fffff801b1698369 to fffff801b1699040
STACK_TEXT:
fffff880 '031fd818 fffff801' b1698369: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
fffff880 '031fd820 fffff801' b1696be0: 00000000 00000000' fffff880 '1bdc7178 00000000 00000000' fffff880' 031fd960: nt! KiBugCheckDispatch + 0 x 69
fffff880 '031fd960 fffff801' b168fb76: ffff93a6 ' f5176c5f fffff801 'b16bed9f fffff980' 0bb2cea0 fffffa80 ' 0d0148b0: nt! KiPageFault + 0 x 260
"fffff880 '031fdaf0 fffff880' 08f52817: fffff880 00000000' fffffa80 ' 00000008 fffffa80 ' 0c1223d0 00000000'00000080: nt! KeSetEvent + 0x1c4
fffff880 '031fdb60 00000000 fffff880': fffffa80'00000008 fffffa80 '0c1223d0 00000000 00000080' fffffa80' 0f891ab0: MBfilt64 + 0 x 1817
fffff880'031fdb68 fffffa80'00000008: fffffa80'0c1223d0 00000000 00000080' fffffa80 '0f891ab0 fffff801' b1c67b64: 0xfffff880'00000000
"fffff880 '031fdb70 fffffa80' 0c1223d0: 00000000 ' fffffa80 00000080"0f891ab0 fffff801' b1c67b64 fffffa80 ' 0f891ab0: 0xfffffa80'00000008
fffff880 '031fdb78 00000000' 00000080: fffffa80 ' 0f891ab0 fffff801 'b1c67b64 fffffa80' 0f891ab0 fffffa80 ' 0f891ab0: 0xfffffa80'0c1223d0
fffff880 '031fdb80 fffffa80' 0f891ab0: fffff801 ' b1c67b64 fffffa80 '0f891ab0 fffffa80' 0f891ab0 fffffa80 ' 0c1223d0: 0x80
fffff880 '031fdb88 fffff801' b1c67b64: fffffa80 ' 0f891ab0 fffffa80 '0f891ab0 fffffa80' 0c1223d0 fffff801 ' b196e800: 0xfffffa80'0f891ab0
fffff880 '031fdb90 fffff801' b1c67917: fffff801'b18b3a50 00000000 00000080' fffff801 'b18b3a50 fffff801' b196e880: nt! ViPendingCompleteAfterWait + 0xc4
fffff880 '031fdbd0 fffff801' b1640521: 00030038'00010001 00000400'000001 c 8 00000000 00000000 ' 0000228 b'00000003: nt! ViPendingWorkerThread + 0x2c
fffff880 '031fdc10 fffff801' b167edd6: fffff801 ' b1914180 fffffa80 '06b19b00 fffff801' b196e880 fffffa80 ' 06ad6940: nt! PspSystemThreadStartup + 0 x 59
fffff880'031fdc60 00000000' 00000000: fffff880 '031fe000 fffff880' 031f8000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16STACK_COMMAND: kb
FOLLOWUP_IP:
MBfilt64 + 1817
fffff880'08f52817? ???SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: MBfilt64 + 1817
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: MBfilt64
Nom_image: MBfilt64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4a7267b0
FAILURE_BUCKET_ID: AV_VRF_MBfilt64 + 1817
BUCKET_ID: AV_VRF_MBfilt64 + 1817
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_vrf_mbfilt64 + 1817
FAILURE_ID_HASH: {984c922a-7f81-464e-cf02-f67be39b2b6a}
Follow-up: MachineOwner
---------7: kd > lmvm MBfilt64
start end module name
fffff880 '08f51000 fffff880' 08f5f000 MBfilt64 T (no symbol)
Loaded symbol image file: MBfilt64.sys
Image path: \SystemRoot\system32\drivers\MBfilt64.sys
Image name: MBfilt64.sys
Timestamp: Wed Jul 30 23:40:32 2009 (4A7267B0)
CheckSum: 0000FF02
ImageSize: 0000E000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4 -
Registry key to disable/uncheck 'Use the graphics processor' Photoshop (Adobe CS6)
Hello
I'm disable/uncheck the option 'Use graphics processor' parameters of the graphics processor (Performance) for all users that connect to a computer. I tried to find the registry key that can do (to create a GPO for that) but without success. Anyone know if this is possible and what will be the registry key that I need to create/change in order to achieve this? Thank you!
Maybe the DisallowOpenGLWindows_ON_D.reg from here will work.
I think you just need to change the version of photoshop from 11.0 to 60.0
11.0 is photoshop cs4
60.0 is photoshop cs6
Adobe - Photoshop: For Windows: Adobe Photoshop CS4 GPU optional plug-ins
-
How to prevent the host ESXi 6 to use the graphics card?
In my ESXi host computer, I have a NVIDIA Quadro 2000 graphics card. However, the host takes the graphics card to start stop passthrough to Virtual Machines (VM). Is there a way to prevent the ESXI host enter the graphics card primary?
"< a href ="https://justus.berlin/2015/06/enable-passthrough-of-mainprimary-gpu-in-xenserver-6-5sp1/"> XenServer has the means to prevent the army to use the main graphics Cardinal < /a > if all goes well it a similar method for ESXi.
This last post is an attempt to set the record straight about the ESXi host using the primary (or only) graphics card. In addition, more information will provide about success past by the graphics card to a virtual machine that is used with a monitor and peripherals as a workstation.
Configuration
ESXi 6.0.0 U2 (Build 3620759)
Material
Workstation HP Z620 (J61 BIOS v03.88)
(1) Xeon E5-2670
64 GB OF DDR3 MEMORY
(1) NVIDIA Quadro 2000
VM - Windows 7 Professional SP1
#1
There is no need to prevent the host from the use of the graphics card beyond to choose the graphics card to get through to a virtual machine. Do alerts if the host and the appropriate parameters are defined automatically. However, the Web Client vSphere does not reflect this behavior when running Firefox on Mac OSX 10.11.3 47.0.1. Recommend use if possible vSphere Client. It presents a panorama that is closer to the real situation within 6 ESXi. If the Web Client is not the height by the time vSphere client is relieved there will be real trouble.
#2
At this point, I think, the pilot VSGA vSphere installed as part of "vmware tools" on a virtual machine is required for the successful graphics card through to a monitor. The process of solving problems associated with a virtual machine to crash the host on VM shutdown or restart has led to the false impression that an uninstall of the VSGA vSphere pilot was necessary for the proper functioning of the virtual machine. Do not uninstall the driver VSGA vSphere.
#3
A virtual machine with passthrough crashing the ESXi host when to stop or restart a VM guest is not unusual. Click here to see an informative discussion about this and how to fix the problem. If the link does not head the Forum of the source, the House and perform a descriptive research. Essentially, the problem seems to be generated by the interaction of the VM with the PCIe bus on start/stop. In my case, after each accident, the ESXi host area before any PCIe 2 location where the graphic card is installed. See the transponder required for features in the BIOS of HP.
#4
ESXi through a GPU was a PITA. It is possible to give enough time and effort. VMware documentation is miserable, so dependent on human is a given. Be sure to leave breadcrumbs for others.
TTFN,
Jake
-
Not able to use the graphics drivers
Original title: NVIDIA GEFORCE 630 M - 1 GB
Hi, on my computer laptop there are two small stickers, reads: NVIDIA GEFORCE 630 M - 1 GB, the other reads as follows: NVIDIA OPTIMUS TECHNOLOGY (autonomy - excellent performance).
Now in Windows 7, I can go to the Control Panel - programs - uninstall a program. At this location it allows me to repair the programs too. At this point, I clicked on the following: NVIDIA GRAPHICS DRIVER 295.55, a box appeared in the middle of my screen entitled RunDLL. Inside of this box it read: there was a problem starting C:\program NVIDIA Corporation\Installer2\Installer.0\NVI2. DLL. the specified module could not be found.
I tried Windows Update and also search and solve problems, but they did not work. On Google I found the NVIDIA site, but couldn't work out how to solve the problem, so any help would be appreciated.
Thank you
JIMOA
Hello
Please contact Microsoft Community.
I understand that you are not able to repair the NVIDIA graphics driver, so let me help you on this question.
Please answer the following questions so that I can better help you:
1. why you try to fix the graphics driver?
2. What number you are confronted with the graphics?
3. have you uninstalled all programs before?
I suggest to try the next step and check to see if it helps:
NVIDIA Optimus technology intelligently optimizes your notebook PC, providing the outstanding graphics performance you need.
Please visit the below mentioned link for more details:
http://www.nvidia.com/object/optimus_technology.html
You can download the latest version of the driver NVIDIA graphics from the link below:
http://www.nvidia.com/download/driverResults.aspx/79528/en-usPlease let us know if you need assistance, we will be happy to help you.
-
Cc of Photoshop may not use the graphics processor
I recently bought a new lenovo ideapad 500 with 12 GB memory and 2 GB AMD radeon graphics... Windows 10
I have advised me to alternate PhotoshopCC graphics for faster processing. Unfortunately I can't do this and I get a message (in photoshop)
say that there is a mistake in the graphics driver...
I contacted intel and they assure me that I have the latest version of the driver... HD 500 graphics card... 20.19.15.4352 on December 15, 2015
I also contacted lenovo but they are totally useless and do not respond...
someone else has had this problem and found a solution...
Everything else works fine even if I saw a couple of times the crash site of the screen then get immediately with a message saying that the graphics device stipped but recovered...
Thank you
Let's do a little test
Go to C: > Program Files > Adobe.
Inside of the folder Adobe locate the file named Sniffer / Sniffer.exe.
Rename to Snort centenarians.
Then launch Photoshop app and check. Let us know the results.
-
First to crashing. Using the Blackmagic intensity Pro HDV sequence
Hello. I'm with the first edition. I use an intensity pro card (blackmagic design) with
Graphics Nvidia Q4000. It crashes on me. More with the HDV footage I'm editing.
I have included my computer form as well as the news media of my layer source footage and sequence settings.Any help with this would be much appreciated!
I checked your power supply based on your list of components, and he gave me these results:
These numbers are without any margin of safety. Generally, I recommend adding about 10% for security. If I look at your power supply, it shows these data:
This tells me that your + 5V rail may be a weak point because of missing with this power supply amperage and worth a visit. Your system needs a combined power of nearly 190 W but delivers only 150 W on the + 3.3 and + 5V rails. It also shows that it will be difficult to make a system more balanced with better disk i/o, because the power is not sufficient to add a dedicated and some raid controller most records. I would not be surprised if the power supply is the culprit here, but let your computer check this. And allow him to carefully check the time CPU, mobo, the GPU, both idle and load.
A good setup for a balanced with such a powerful processor system would be something as described in the system of 'Warrior' here: Adobe Forums: PC to build? An update...
-
How to use the graphic cursor 3D of labview 2010
Hi all
I use for my 3D graphics application. I have inserted the cursor inside but cannot able to move.
Please give me suggestions and solution for the same.
Thank you & best regards
Hi all
I found my mistake. In fact cursor may move in particular co-ordiante that feed us to him.
-
How to use the graphics card 3d animation software?
I have Window 7 Ultimate, I want to use software Daz3d without graphics card, it is possible to use this software without graphics card? Please help me!
What are the requirements for this software: -.
www.DAZ3D.com- 32 bit
- Intel Dual Core (or equivalent) or higher
- 1.6 GHz (dual-core 2 GHz or more recommended fast)
- Windows 7, Vista or XP (Windows 7 recommended)
- 1 GB of RAM (2 GB recommended) min
- 1 GB of free space on hard drive for installation
- Graphics card compatible OpenGL 1.6 at least 128 MB of RAM (recommended hardware-accelerated OpenGL 2.2, or higher, compatible with 512 MB RAM)
- DirectX 9 (used for audio processing only)
Hello
You can contact DAZ community to check the same.I hope this helps!
Maybe you are looking for
-
How to place a photo of 'album' in a 'book' you have already created
How to place a photo of 'album' in a 'book' you have already created
-
Why my Mac loses audio if she goes to sleep?
I have an iMac 27 El Captan running. If being run all audio works fine until he falls asleep. When I wake it upward, usually by pressing the space bar, the audio if iTunes or my DAW... doe does not work. I have to restart to make it work. What Mi
-
Satellite 2670: Need driver for Win98
Driver laptop Toshiba PS267L - K 4, 906 pls win98
-
Download music from itunes to my mp3 player?
I have a mp3 player that I would like to download my music apple on. Is it possible for me to do it than my school chromebook or my computer windows of moms. If so, how? Also, I didn't know what the community view in...
-
Hi all! How can I find tank all occurrences in a string. For example, in the string - 'This is a string' the tank 'i' appears three times. I use Labview 7.1. Kind regards.